Changes between Initial Version and Version 1 of TracInstall


Ignore:
Timestamp:
09/13/11 21:38:10 (13 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracInstall

    v1 v1  
     1= Trac Installation Guide for 0.12 =
     2[[TracGuideToc]]
     3
     4Trac is written in the Python programming language and needs a database, [http://sqlite.org/ SQLite], [http://www.postgresql.org/ PostgreSQL], or [http://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://genshi.edgewall.org Genshi] templating system.
     5
     6Since version 0.12, Trac can also be localized, and there's probably a translation available for your language. If you want to be able to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default english version, as usual.
     7
     8If you're interested in contributing new translations for other languages or enhance the existing translations, then please have a look at [[trac:TracL10N]].
     9
     10What follows are generic instructions for installing and setting up Trac and its requirements. While you may find instructions for installing Trac on specific systems at TracInstallPlatforms on the main Trac site, please be sure to '''first read through these general instructions''' to get a good understanding of the tasks involved.
     11
     12[[PageOutline(2-3,Installation Steps,inline)]]
     13
     14== Dependencies ==
     15=== Mandatory Dependencies
     16To install Trac, the following software packages must be installed:
     17
     18 * [http://www.python.org/ Python], version >= 2.4 and < 3.0
     19   (note that we dropped the support for Python 2.3 in this release)
     20 * [http://peak.telecommunity.com/DevCenter/setuptools setuptools], version >= 0.6
     21 * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.6
     22
     23You also need a database system and the corresponding python bindings.
     24The database can be either SQLite, PostgreSQL or MySQL.
     25
     26==== For the SQLite database #ForSQLite
     27
     28If you're using Python 2.5 or 2.6, you already have everything you need.
     29
     30If you're using Python 2.4 and need pysqlite, you can download from
     31[http://code.google.com/p/pysqlite/downloads/list google code] the Windows
     32installers or the tar.gz archive for building from source:
     33{{{
     34$ tar xvfz <version>.tar.gz
     35$ cd <version>
     36$ python setup.py build_static install
     37}}}
     38 
     39This will extract the SQLite code and build the bindings.
     40
     41SQLite 2.x is no longer supported. For SQLite 3.x, the pysqlite 1.1.x
     42bindings are also no longer supported, use pysqlite 2.x.
     43
     44See additional information in [trac:PySqlite PySqlite].
     45
     46==== For the PostgreSQL database #ForPostgreSQL
     47
     48You need to install the database and its Python bindings:
     49 * [http://www.postgresql.org/ PostgreSQL]
     50 * [http://pypi.python.org/pypi/psycopg2 psycopg2]
     51
     52See [trac:DatabaseBackend#Postgresql DatabaseBackend] for details.
     53
     54
     55==== For the MySQL database #ForMySQL
     56
     57Trac can now work quite well with MySQL, provided you follow the guidelines.
     58
     59 * [http://mysql.com/ MySQL], version 5.0 or later
     60 * [http://sf.net/projects/mysql-python MySQLdb], version 1.2.2 or later
     61
     62It is '''very''' important to read carefully the  [trac:MySqlDb MySqlDb] page before creating the database.
     63
     64=== Optional Dependencies
     65
     66==== Version Control System ====
     67
     68===== Subversion =====
     69 * [http://subversion.apache.org/ Subversion], 1.5.x or 1.6.x and the '''''corresponding''''' Python bindings. Older versions starting from 1.0, like 1.2.4, 1.3.2 or 1.4.2, etc. should still work. For troubleshooting information, check the [trac:TracSubversion#Troubleshooting TracSubversion] page.
     70
     71There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. Note that Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], neither does it work yet with the newer `ctype`-style bindings
     72
     73
     74'''Please note:''' if using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported].
     75
     76
     77===== Others =====
     78
     79Support for other version control systems is provided via third-parties. See [trac:PluginList PluginList] and [trac:VersioningSystemBackend VersioningSystemBackend].
     80
     81==== Web Server ====
     82A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server ] section below.
     83
     84Alternatively you configure Trac to run in any of the following environments.
     85 * [http://httpd.apache.org/ Apache] with
     86   - [http://code.google.com/p/modwsgi/ mod_wsgi], see [wiki:TracModWSGI] and
     87     http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac
     88   - [http://modpython.org/ mod_python 3.3.1], see TracModPython)
     89 * a [http://www.fastcgi.com/ FastCGI]-capable web server (see TracFastCgi)
     90 * an [http://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web
     91   server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp])
     92 * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script
     93   is highly discouraged''', better use one of the previous options.
     94   
     95
     96==== Other Python Packages ====
     97
     98 * [http://babel.edgewall.org Babel], version >= 0.9.5,
     99   needed for localization support
     100 * [http://docutils.sourceforge.net/ docutils], version >= 0.3.9
     101   for WikiRestructuredText.
     102 * [http://pygments.pocoo.org Pygments] for
     103   [wiki:TracSyntaxColoring syntax highlighting].
     104   [http://silvercity.sourceforge.net/ SilverCity] and/or
     105   [http://gnu.org/software/enscript/enscript.html Enscript] may still be used
     106   but are deprecated and you really should be using Pygments.
     107 * [http://pytz.sf.net pytz] to get a complete list of time zones,
     108   otherwise Trac will fall back on a shorter list from
     109   an internal time zone implementation.
     110
     111'''Attention''': The various available versions of these dependencies are not necessarily interchangable, so please pay attention to the version numbers above. If you are having trouble getting Trac to work please double-check all the dependencies before asking for help on the [trac:MailingList MailingList] or [trac:IrcChannel IrcChannel].
     112
     113Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing'' (there are even some pages that are still talking about Trac 0.8!).
     114
     115
     116== Installing Trac ==
     117=== Using `easy_install`
     118One way to install Trac is using `setuptools`.
     119With setuptools you can install Trac from the subversion repository;
     120
     121A few examples:
     122
     123 - install Trac 0.12:
     124   {{{
     125   easy_install Trac==0.12
     126   }}}
     127
     128 - install latest development version 0.12dev:
     129   {{{
     130   easy_install Trac==dev
     131   }}}
     132   Note that in this case you won't have the possibility to run a localized version of Trac;
     133   either use a released version or install from source
     134
     135=== Using `pip`
     136'pip' is an easy_install replacement that is very useful to quickly install python packages.
     137To get a trac installation up and running in less than 5 minutes:
     138
     139Assuming you want to have your entire pip installation in /opt/user/trac
     140
     141 -
     142{{{
     143pip -E /opt/user/trac install trac psycopg2
     144}}}
     145or
     146 -
     147{{{
     148pip -E /opt/user/trac install trac mysql-python
     149}}}
     150
     151Make sure your OS specific headers are available for pip to automatically build PostgreSQL (libpq-dev) or MySQL (libmysqlclient-dev) bindings.
     152
     153pip will automatically resolve all dependencies (like Genshi, pygments, etc.) and download the latest packages on pypi.python.org and create a self contained installation in /opt/user/trac
     154
     155All commands (tracd, trac-admin) are available in /opt/user/trac/bin . This can also be leveraged for mod_python (using PythonHandler directive) and mod_wsgi (using WSGIDaemonProcess directive)
     156
     157Additionally, you can install several trac plugins (listed [http://pypi.python.org/pypi?:action=search&term=trac&submit=search here]) through pip.
     158
     159
     160
     161=== From source
     162Of course, using the python-typical setup at the top of the source directory also works.
     163
     164You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. Trac-0.12.tar.gz), or you can get the source directly from the repository (see Trac:SubversionRepository for details).
     165
     166{{{
     167$ python ./setup.py install
     168}}}
     169
     170''You'll need root permissions or equivalent for this step.''
     171
     172This will byte-compile the python source code and install it as an .egg file or folder in the `site-packages` directory
     173of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates.
     174
     175The script will also install the [wiki:TracAdmin trac-admin] command-line tool, used to create and maintain [wiki:TracEnvironment project environments], as well as the [wiki:TracStandalone tracd] standalone server.
     176
     177If you install from source and want to make Trac available in other languages, make sure  Babel is installed. Only then, perform the `install` (or simply redo the `install` once again afterwards if you realize Babel was not yet installed):
     178{{{
     179$ python ./setup.py install
     180}}}
     181Alternatively, you can do a `bdist_egg` and copy the .egg from dist/ to the place of your choice, or you can create a Windows installer (`bdist_wininst`).
     182
     183=== Advanced Options ===
     184
     185To install Trac to a custom location, or find out about other advanced installation options, run:
     186{{{
     187easy_install --help
     188}}}
     189
     190Also see [http://docs.python.org/inst/inst.html Installing Python Modules] for detailed information.
     191
     192Specifically, you might be interested in:
     193{{{
     194easy_install --prefix=/path/to/installdir
     195}}}
     196or, if installing Trac to a Mac OS X system:
     197{{{
     198easy_install --prefix=/usr/local --install-dir=/Library/Python/2.5/site-packages
     199}}}
     200Note: If installing on Mac OS X 10.6 running {{{ easy_install http://svn.edgewall.org/repos/trac/trunk }}} will install into {{{ /usr/local }}} and {{{ /Library/Python/2.6/site-packages }}} by default
     201
     202The above will place your `tracd` and `trac-admin` commands into `/usr/local/bin` and will install the Trac libraries and dependencies into `/Library/Python/2.5/site-packages`, which is Apple's preferred location for third-party Python application installations.
     203
     204
     205== Creating a Project Environment ==
     206
     207A [TracEnvironment Trac environment] is the backend storage where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is basically a directory that contains a human-readable [TracIni configuration file], and various other files and directories.
     208
     209A new environment is created using [wiki:TracAdmin trac-admin]:
     210{{{
     211$ trac-admin /path/to/myproject initenv
     212}}}
     213
     214[TracAdmin trac-admin] will prompt you for the information it needs to create the environment, such as the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for one of these options, just press `<Enter>` to use the default value.
     215
     216Using the default database connection string in particular will always work as long as you have SQLite installed.
     217For the other [DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point.
     218
     219Since 0.12, Trac doesn't ask for a [TracEnvironment#SourceCodeRepository source code repository] anymore when creating an environment. Repositories can be [TracRepositoryAdmin added] afterward, or the version control support can be disabled completely if you don't need it.
     220
     221Also note that the values you specify here can be changed later by directly editing the [TracIni conf/trac.ini] configuration file.
     222
     223Finally, make sure the user account under which the web front-end runs will have '''write permissions''' to the environment directory and all the files inside. This will be the case if you run `trac-admin ... initenv` as this user. If not, you should set the correct user afterwards. For example on Linux, with the web server running as user `apache` and group `apache`, enter:
     224{{{
     225# chown -R apache.apache /path/to/myproject
     226}}}
     227
     228== Running the Standalone Server ==
     229
     230After having created a Trac environment, you can easily try the web interface by running the standalone server [wiki:TracStandalone tracd]:
     231{{{
     232$ tracd --port 8000 /path/to/myproject
     233}}}
     234
     235Then, fire up a browser and visit `http://localhost:8000/`. You should get a simple listing of all environments that `tracd` knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with Trac you can have the standalone server skip the environment list by starting it like this:
     236{{{
     237$ tracd -s --port 8000 /path/to/myproject
     238}}}
     239
     240== Running Trac on a Web Server ==
     241
     242Trac provides various options for connecting to a "real" web server: [wiki:TracCgi CGI], [wiki:TracFastCgi FastCGI], [wiki:TracModWSGI mod_wsgi] and [wiki:TracModPython mod_python]. For decent performance, it is recommended that you use either FastCGI or mod_wsgi.
     243
     244Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS.
     245
     246==== Generating the Trac cgi-bin directory ====
     247
     248In order for Trac to function properly with FastCGI you need to have a `trac.fcgi` file and for mod_wsgi a `trac.wsgi` file. These are Python scripts which load the appropriate Python code. They can be generated using the `deploy` option of [wiki:TracAdmin trac-admin].
     249
     250There is, however, a bit of a chicken-and-egg problem. The [wiki:TracAdmin trac-admin] command requires an existing environment to function, but complains if the deploy directory already exists. This is a problem, because environments are often stored in a subdirectory of the deploy. The solution is to do something like this:
     251{{{
     252mkdir -p /usr/share/trac/projects/my-project
     253trac-admin /usr/share/trac/projects/my-project initenv
     254trac-admin /usr/share/trac/projects/my-project deploy /tmp/deploy
     255mv /tmp/deploy/* /usr/share/trac
     256}}}
     257
     258==== Setting up the Plugin Cache ====
     259
     260Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions on how to set environment variables.
     261
     262== Configuring Authentication ==
     263
     264The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. The basic procedure is described in the [wiki:TracCgi#AddingAuthentication "Adding Authentication"] section on the TracCgi page. To learn how to setup authentication for the frontend you're using, please refer to one of the following pages:
     265
     266 * TracStandalone if you use the standalone server, `tracd`.
     267 * TracCgi if you use the CGI or FastCGI web front ends.
     268 * [wiki:TracModWSGI] if you use the Apache mod_wsgi web front end.
     269 * TracModPython if you use the Apache mod_python web front end.
     270
     271
     272== Automatic reference to the SVN changesets in Trac tickets ==
     273
     274You can configure SVN to automatically add a reference to the changeset into the ticket comments, whenever changes are committed to the repository. The description of the commit needs to contain one of the following formulas:
     275 * '''`Refs #123`''' - to reference this changeset in `#123` ticket
     276 * '''`Fixes #123`''' - to reference this changeset and close `#123` ticket with the default status ''fixed''
     277
     278This functionality requires a post-commit hook to be installed as described in [wiki:TracRepositoryAdmin#ExplicitSync TracRepositoryAdmin], and enabling the optional commit updater components by adding the following line to the `[components]` section of your [wiki:TracIni#components-section trac.ini], or enabling the components in the "Plugins" admin panel.
     279{{{
     280tracopt.ticket.commit_updater.* = enabled
     281}}}
     282For more information, see the documentation of the `CommitTicketUpdater` component in the "Plugins" admin panel.
     283
     284== Using Trac ==
     285
     286Once you have your Trac site up and running, you should be able to create tickets, view the timeline, browse your version control repository if configured, etc.
     287
     288Keep in mind that anonymous (not logged in) users can by default access most but not all of the features. You will need to configure authentication and grant additional [wiki:TracPermissions permissions] to authenticated users to see the full set of features.
     289
     290'' Enjoy! ''
     291
     292[trac:TracTeam The Trac Team]
     293
     294----
     295See also: [trac:TracInstallPlatforms TracInstallPlatforms], TracGuide, TracCgi, TracFastCgi, TracModPython, [wiki:TracModWSGI], TracUpgrade, TracPermissions