| 1 | # dns/trunk/DNSDB.pm
|
|---|
| 2 | # Abstraction functions for DNS administration
|
|---|
| 3 | ###
|
|---|
| 4 | # SVN revision info
|
|---|
| 5 | # $Date: 2011-12-21 22:49:46 +0000 (Wed, 21 Dec 2011) $
|
|---|
| 6 | # SVN revision $Rev: 212 $
|
|---|
| 7 | # Last update by $Author: kdeugau $
|
|---|
| 8 | ###
|
|---|
| 9 | # Copyright (C) 2008-2011 - Kris Deugau <kdeugau@deepnet.cx>
|
|---|
| 10 |
|
|---|
| 11 | package DNSDB;
|
|---|
| 12 |
|
|---|
| 13 | use strict;
|
|---|
| 14 | use warnings;
|
|---|
| 15 | use Exporter;
|
|---|
| 16 | use DBI;
|
|---|
| 17 | use Net::DNS;
|
|---|
| 18 | use Crypt::PasswdMD5;
|
|---|
| 19 | use Net::SMTP;
|
|---|
| 20 | use NetAddr::IP;
|
|---|
| 21 | use POSIX;
|
|---|
| 22 | use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
|
|---|
| 23 |
|
|---|
| 24 | $VERSION = 0.1; ##VERSION##
|
|---|
| 25 | @ISA = qw(Exporter);
|
|---|
| 26 | @EXPORT_OK = qw(
|
|---|
| 27 | &initGlobals
|
|---|
| 28 | &initPermissions &getPermissions &changePermissions &comparePermissions
|
|---|
| 29 | &changeGroup
|
|---|
| 30 | &loadConfig &connectDB &finish
|
|---|
| 31 | &addDomain &delDomain &domainName &domainID
|
|---|
| 32 | &addGroup &delGroup &getChildren &groupName
|
|---|
| 33 | &addUser &updateUser &delUser &userFullName &userStatus &getUserData
|
|---|
| 34 | &getSOA &getRecLine &getDomRecs &getRecCount
|
|---|
| 35 | &addRec &updateRec &delRec
|
|---|
| 36 | &getParents
|
|---|
| 37 | &isParent
|
|---|
| 38 | &domStatus &importAXFR
|
|---|
| 39 | &export
|
|---|
| 40 | &mailNotify
|
|---|
| 41 | %typemap %reverse_typemap %config
|
|---|
| 42 | %permissions @permtypes $permlist
|
|---|
| 43 | );
|
|---|
| 44 |
|
|---|
| 45 | @EXPORT = (); # Export nothing by default.
|
|---|
| 46 | %EXPORT_TAGS = ( ALL => [qw(
|
|---|
| 47 | &initGlobals
|
|---|
| 48 | &initPermissions &getPermissions &changePermissions &comparePermissions
|
|---|
| 49 | &changeGroup
|
|---|
| 50 | &loadConfig &connectDB &finish
|
|---|
| 51 | &addDomain &delDomain &domainName &domainID
|
|---|
| 52 | &addGroup &delGroup &getChildren &groupName
|
|---|
| 53 | &addUser &updateUser &delUser &userFullName &userStatus &getUserData
|
|---|
| 54 | &getSOA &getRecLine &getDomRecs &getRecCount
|
|---|
| 55 | &addRec &updateRec &delRec
|
|---|
| 56 | &getParents
|
|---|
| 57 | &isParent
|
|---|
| 58 | &domStatus &importAXFR
|
|---|
| 59 | &export
|
|---|
| 60 | &mailNotify
|
|---|
| 61 | %typemap %reverse_typemap %config
|
|---|
| 62 | %permissions @permtypes $permlist
|
|---|
| 63 | )]
|
|---|
| 64 | );
|
|---|
| 65 |
|
|---|
| 66 | our $group = 1;
|
|---|
| 67 | our $errstr = '';
|
|---|
| 68 |
|
|---|
| 69 | # Halfway sane defaults for SOA, TTL, etc.
|
|---|
| 70 | # serial defaults to 0 for convenience.
|
|---|
| 71 | # value will be either YYYYMMDDNN for BIND/etc, or auto-internal for tinydns
|
|---|
| 72 | our %def = qw (
|
|---|
| 73 | contact hostmaster.DOMAIN
|
|---|
| 74 | prins ns1.myserver.com
|
|---|
| 75 | serial 0
|
|---|
| 76 | soattl 86400
|
|---|
| 77 | refresh 10800
|
|---|
| 78 | retry 3600
|
|---|
| 79 | expire 604800
|
|---|
| 80 | minttl 10800
|
|---|
| 81 | ttl 10800
|
|---|
| 82 | );
|
|---|
| 83 |
|
|---|
| 84 | # Arguably defined wholly in the db, but little reason to change without supporting code changes
|
|---|
| 85 | our @permtypes = qw (
|
|---|
| 86 | group_edit group_create group_delete
|
|---|
| 87 | user_edit user_create user_delete
|
|---|
| 88 | domain_edit domain_create domain_delete
|
|---|
| 89 | record_edit record_create record_delete
|
|---|
| 90 | self_edit admin
|
|---|
| 91 | );
|
|---|
| 92 | our $permlist = join(',',@permtypes);
|
|---|
| 93 |
|
|---|
| 94 | # DNS record type map and reverse map.
|
|---|
| 95 | # loaded from the database, from http://www.iana.org/assignments/dns-parameters
|
|---|
| 96 | our %typemap;
|
|---|
| 97 | our %reverse_typemap;
|
|---|
| 98 |
|
|---|
| 99 | our %permissions;
|
|---|
| 100 |
|
|---|
| 101 | # Prepopulate a basic config. Note some of these *will* cause errors if left unset.
|
|---|
| 102 | # note: add appropriate stanzas in loadConfig to parse these
|
|---|
| 103 | our %config = (
|
|---|
| 104 | # Database connection info
|
|---|
| 105 | dbname => 'dnsdb',
|
|---|
| 106 | dbuser => 'dnsdb',
|
|---|
| 107 | dbpass => 'secret',
|
|---|
| 108 | dbhost => '',
|
|---|
| 109 |
|
|---|
| 110 | # Email notice settings
|
|---|
| 111 | mailhost => 'smtp.example.com',
|
|---|
| 112 | mailnotify => 'dnsdb@example.com', # to
|
|---|
| 113 | mailsender => 'dnsdb@example.com', # from
|
|---|
| 114 | mailname => 'DNS Administration',
|
|---|
| 115 | orgname => 'Example Corp',
|
|---|
| 116 | domain => 'example.com',
|
|---|
| 117 |
|
|---|
| 118 | # Template directory
|
|---|
| 119 | templatedir => 'templates/',
|
|---|
| 120 | # fmeh. this is a real web path, not a logical internal one. hm..
|
|---|
| 121 | # cssdir => 'templates/',
|
|---|
| 122 |
|
|---|
| 123 | # Session params
|
|---|
| 124 | timeout => '3600', # 1 hour default
|
|---|
| 125 |
|
|---|
| 126 | # Other miscellanea
|
|---|
| 127 | log_failures => 1, # log all evarthing by default
|
|---|
| 128 | perpage => 15,
|
|---|
| 129 | );
|
|---|
| 130 |
|
|---|
| 131 |
|
|---|
| 132 | ##
|
|---|
| 133 | ## Initialization and cleanup subs
|
|---|
| 134 | ##
|
|---|
| 135 |
|
|---|
| 136 |
|
|---|
| 137 | ## DNSDB::loadConfig()
|
|---|
| 138 | # Load the minimum required initial state (DB connect info) from a config file
|
|---|
| 139 | # Load misc other bits while we're at it.
|
|---|
| 140 | # Takes an optional basename and config path to look for
|
|---|
| 141 | # Populates the %config and %def hashes
|
|---|
| 142 | sub loadConfig {
|
|---|
| 143 | my $basename = shift || ''; # this will work OK
|
|---|
| 144 |
|
|---|
| 145 | my $deferr = ''; # place to put error from default config file in case we can't find either one
|
|---|
| 146 |
|
|---|
| 147 | my $configroot = '/etc/dnsdb';
|
|---|
| 148 | $configroot = '' if $basename =~ m|^/|;
|
|---|
| 149 | $basename .= ".conf" if $basename !~ /\.conf$/;
|
|---|
| 150 | my $defconfig = "$configroot/dnsdb.conf";
|
|---|
| 151 | my $siteconfig = "$configroot/$basename";
|
|---|
| 152 |
|
|---|
| 153 | # System defaults
|
|---|
| 154 | __cfgload("$defconfig") or $deferr = $errstr;
|
|---|
| 155 |
|
|---|
| 156 | # Per-site-ish settings.
|
|---|
| 157 | if ($basename ne '.conf') {
|
|---|
| 158 | unless (__cfgload("$siteconfig")) {
|
|---|
| 159 | $errstr = ($deferr ? "Error opening default config file $defconfig: $deferr\n" : '').
|
|---|
| 160 | "Error opening site config file $siteconfig";
|
|---|
| 161 | return;
|
|---|
| 162 | }
|
|---|
| 163 | }
|
|---|
| 164 |
|
|---|
| 165 | # Munge log_failures.
|
|---|
| 166 | if ($config{log_failures} ne '1' && $config{log_failures} ne '0') {
|
|---|
| 167 | # true/false, on/off, yes/no all valid.
|
|---|
| 168 | if ($config{log_failures} =~ /^(?:true|false|on|off|yes|no)$/) {
|
|---|
| 169 | if ($config{log_failures} =~ /(?:true|on|yes)/) {
|
|---|
| 170 | $config{log_failures} = 1;
|
|---|
| 171 | } else {
|
|---|
| 172 | $config{log_failures} = 0;
|
|---|
| 173 | }
|
|---|
| 174 | } else {
|
|---|
| 175 | $errstr = "Bad log_failures setting $config{log_failures}";
|
|---|
| 176 | $config{log_failures} = 1;
|
|---|
| 177 | # Bad setting shouldn't be fatal.
|
|---|
| 178 | # return 2;
|
|---|
| 179 | }
|
|---|
| 180 | }
|
|---|
| 181 |
|
|---|
| 182 | # All good, clear the error and go home.
|
|---|
| 183 | $errstr = '';
|
|---|
| 184 | return 1;
|
|---|
| 185 | } # end loadConfig()
|
|---|
| 186 |
|
|---|
| 187 |
|
|---|
| 188 | ## DNSDB::__cfgload()
|
|---|
| 189 | # Private sub to parse a config file and load it into %config
|
|---|
| 190 | # Takes a file handle on an open config file
|
|---|
| 191 | sub __cfgload {
|
|---|
| 192 | $errstr = '';
|
|---|
| 193 | my $cfgfile = shift;
|
|---|
| 194 |
|
|---|
| 195 | if (open CFG, "<$cfgfile") {
|
|---|
| 196 | while (<CFG>) {
|
|---|
| 197 | chomp;
|
|---|
| 198 | s/^\s*//;
|
|---|
| 199 | next if /^#/;
|
|---|
| 200 | next if /^$/;
|
|---|
| 201 | # hmm. more complex bits in this file might require [heading] headers, maybe?
|
|---|
| 202 | # $mode = $1 if /^\[(a-z)+]/;
|
|---|
| 203 | # DB connect info
|
|---|
| 204 | $config{dbname} = $1 if /^dbname\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 205 | $config{dbuser} = $1 if /^dbuser\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 206 | $config{dbpass} = $1 if /^dbpass\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 207 | $config{dbhost} = $1 if /^dbhost\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 208 | # SOA defaults
|
|---|
| 209 | $def{contact} = $1 if /^contact\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 210 | $def{prins} = $1 if /^prins\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 211 | $def{soattl} = $1 if /^soattl\s*=\s*(\d+)/i;
|
|---|
| 212 | $def{refresh} = $1 if /^refresh\s*=\s*(\d+)/i;
|
|---|
| 213 | $def{retry} = $1 if /^retry\s*=\s*(\d+)/i;
|
|---|
| 214 | $def{expire} = $1 if /^expire\s*=\s*(\d+)/i;
|
|---|
| 215 | $def{minttl} = $1 if /^minttl\s*=\s*(\d+)/i;
|
|---|
| 216 | $def{ttl} = $1 if /^ttl\s*=\s*(\d+)/i;
|
|---|
| 217 | # Mail settings
|
|---|
| 218 | $config{mailhost} = $1 if /^mailhost\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 219 | $config{mailnotify} = $1 if /^mailnotify\s*=\s*([a-z0-9_.\@-]+)/i;
|
|---|
| 220 | $config{mailsender} = $1 if /^mailsender\s*=\s*([a-z0-9_.\@-]+)/i;
|
|---|
| 221 | $config{mailname} = $1 if /^mailname\s*=\s*([a-z0-9\s_.-]+)/i;
|
|---|
| 222 | $config{orgname} = $1 if /^orgname\s*=\s*([a-z0-9\s_.,'-]+)/i;
|
|---|
| 223 | $config{domain} = $1 if /^domain\s*=\s*([a-z0-9_.-]+)/i;
|
|---|
| 224 | # session - note this is fed directly to CGI::Session
|
|---|
| 225 | $config{timeout} = $1 if /^[tT][iI][mM][eE][oO][uU][tT]\s*=\s*(\d+[smhdwMy]?)/;
|
|---|
| 226 | # misc
|
|---|
| 227 | $config{log_failures} = $1 if /^log_failures\s*=\s*([a-z01]+)/i;
|
|---|
| 228 | $config{perpage} = $1 if /^perpage\s*=\s*(\d+)/i;
|
|---|
| 229 | }
|
|---|
| 230 | close CFG;
|
|---|
| 231 | } else {
|
|---|
| 232 | $errstr = $!;
|
|---|
| 233 | return;
|
|---|
| 234 | }
|
|---|
| 235 | return 1;
|
|---|
| 236 | } # end __cfgload()
|
|---|
| 237 |
|
|---|
| 238 |
|
|---|
| 239 | ## DNSDB::connectDB()
|
|---|
| 240 | # Creates connection to DNS database.
|
|---|
| 241 | # Requires the database name, username, and password.
|
|---|
| 242 | # Returns a handle to the db.
|
|---|
| 243 | # Set up for a PostgreSQL db; could be any transactional DBMS with the
|
|---|
| 244 | # right changes.
|
|---|
| 245 | sub connectDB {
|
|---|
| 246 | $errstr = '';
|
|---|
| 247 | my $dbname = shift;
|
|---|
| 248 | my $user = shift;
|
|---|
| 249 | my $pass = shift;
|
|---|
| 250 | my $dbh;
|
|---|
| 251 | my $DSN = "DBI:Pg:dbname=$dbname";
|
|---|
| 252 |
|
|---|
| 253 | my $host = shift;
|
|---|
| 254 | $DSN .= ";host=$host" if $host;
|
|---|
| 255 |
|
|---|
| 256 | # Note that we want to autocommit by default, and we will turn it off locally as necessary.
|
|---|
| 257 | # We may not want to print gobbledygook errors; YMMV. Have to ponder that further.
|
|---|
| 258 | $dbh = DBI->connect($DSN, $user, $pass, {
|
|---|
| 259 | AutoCommit => 1,
|
|---|
| 260 | PrintError => 0
|
|---|
| 261 | })
|
|---|
| 262 | or return (undef, $DBI::errstr) if(!$dbh);
|
|---|
| 263 |
|
|---|
| 264 | ##fixme: initialize the DB if we can't find the table (since, by definition, there's
|
|---|
| 265 | # nothing there if we can't select from it...)
|
|---|
| 266 | my $tblsth = $dbh->prepare("SELECT count(*) FROM pg_catalog.pg_class WHERE relkind='r' AND relname=?");
|
|---|
| 267 | my ($tblcount) = $dbh->selectrow_array($tblsth, undef, ('misc'));
|
|---|
| 268 | return (undef,$DBI::errstr) if $dbh->err;
|
|---|
| 269 |
|
|---|
| 270 | #if ($tblcount == 0) {
|
|---|
| 271 | # # create tables one at a time, checking for each.
|
|---|
| 272 | # return (undef, "check table misc missing");
|
|---|
| 273 | #}
|
|---|
| 274 |
|
|---|
| 275 |
|
|---|
| 276 | # Return here if we can't select.
|
|---|
| 277 | # This should retrieve the dbversion key.
|
|---|
| 278 | my $sth = $dbh->prepare("SELECT key,value FROM misc WHERE misc_id=1");
|
|---|
| 279 | $sth->execute();
|
|---|
| 280 | return (undef,$DBI::errstr) if ($sth->err);
|
|---|
| 281 |
|
|---|
| 282 | ##fixme: do stuff to the DB on version mismatch
|
|---|
| 283 | # x.y series should upgrade on $DNSDB::VERSION > misc(key=>version)
|
|---|
| 284 | # DB should be downward-compatible; column defaults should give sane (if possibly
|
|---|
| 285 | # useless-and-needs-help) values in columns an older software stack doesn't know about.
|
|---|
| 286 |
|
|---|
| 287 | # See if the select returned anything (or null data). This should
|
|---|
| 288 | # succeed if the select executed, but...
|
|---|
| 289 | $sth->fetchrow();
|
|---|
| 290 | return (undef,$DBI::errstr) if ($sth->err);
|
|---|
| 291 |
|
|---|
| 292 | $sth->finish;
|
|---|
| 293 |
|
|---|
| 294 | # If we get here, we should be OK.
|
|---|
| 295 | return ($dbh,"DB connection OK");
|
|---|
| 296 | } # end connectDB
|
|---|
| 297 |
|
|---|
| 298 |
|
|---|
| 299 | ## DNSDB::finish()
|
|---|
| 300 | # Cleans up after database handles and so on.
|
|---|
| 301 | # Requires a database handle
|
|---|
| 302 | sub finish {
|
|---|
| 303 | my $dbh = $_[0];
|
|---|
| 304 | $dbh->disconnect;
|
|---|
| 305 | } # end finish
|
|---|
| 306 |
|
|---|
| 307 |
|
|---|
| 308 | ## DNSDB::initGlobals()
|
|---|
| 309 | # Initialize global variables
|
|---|
| 310 | # NB: this does NOT include web-specific session variables!
|
|---|
| 311 | # Requires a database handle
|
|---|
| 312 | sub initGlobals {
|
|---|
| 313 | my $dbh = shift;
|
|---|
| 314 |
|
|---|
| 315 | # load record types from database
|
|---|
| 316 | my $sth = $dbh->prepare("select val,name from rectypes");
|
|---|
| 317 | $sth->execute;
|
|---|
| 318 | while (my ($recval,$recname) = $sth->fetchrow_array()) {
|
|---|
| 319 | $typemap{$recval} = $recname;
|
|---|
| 320 | $reverse_typemap{$recname} = $recval;
|
|---|
| 321 | }
|
|---|
| 322 | } # end initGlobals
|
|---|
| 323 |
|
|---|
| 324 |
|
|---|
| 325 | ## DNSDB::initPermissions()
|
|---|
| 326 | # Set up permissions global
|
|---|
| 327 | # Takes database handle and UID
|
|---|
| 328 | sub initPermissions {
|
|---|
| 329 | my $dbh = shift;
|
|---|
| 330 | my $uid = shift;
|
|---|
| 331 |
|
|---|
| 332 | # %permissions = $(getPermissions($dbh,'user',$uid));
|
|---|
| 333 | getPermissions($dbh, 'user', $uid, \%permissions);
|
|---|
| 334 |
|
|---|
| 335 | } # end initPermissions()
|
|---|
| 336 |
|
|---|
| 337 |
|
|---|
| 338 | ## DNSDB::getPermissions()
|
|---|
| 339 | # Get permissions from DB
|
|---|
| 340 | # Requires DB handle, group or user flag, ID, and hashref.
|
|---|
| 341 | sub getPermissions {
|
|---|
| 342 | my $dbh = shift;
|
|---|
| 343 | my $type = shift;
|
|---|
| 344 | my $id = shift;
|
|---|
| 345 | my $hash = shift;
|
|---|
| 346 |
|
|---|
| 347 | my $sql = qq(
|
|---|
| 348 | SELECT
|
|---|
| 349 | p.admin,p.self_edit,
|
|---|
| 350 | p.group_create,p.group_edit,p.group_delete,
|
|---|
| 351 | p.user_create,p.user_edit,p.user_delete,
|
|---|
| 352 | p.domain_create,p.domain_edit,p.domain_delete,
|
|---|
| 353 | p.record_create,p.record_edit,p.record_delete
|
|---|
| 354 | FROM permissions p
|
|---|
| 355 | );
|
|---|
| 356 | if ($type eq 'group') {
|
|---|
| 357 | $sql .= qq(
|
|---|
| 358 | JOIN groups g ON g.permission_id=p.permission_id
|
|---|
| 359 | WHERE g.group_id=?
|
|---|
| 360 | );
|
|---|
| 361 | } else {
|
|---|
| 362 | $sql .= qq(
|
|---|
| 363 | JOIN users u ON u.permission_id=p.permission_id
|
|---|
| 364 | WHERE u.user_id=?
|
|---|
| 365 | );
|
|---|
| 366 | }
|
|---|
| 367 |
|
|---|
| 368 | my $sth = $dbh->prepare($sql);
|
|---|
| 369 |
|
|---|
| 370 | $sth->execute($id) or die "argh: ".$sth->errstr;
|
|---|
| 371 |
|
|---|
| 372 | # my $permref = $sth->fetchrow_hashref;
|
|---|
| 373 | # return $permref;
|
|---|
| 374 | # $hash = $permref;
|
|---|
| 375 | # Eww. Need to learn how to forcibly drop a hashref onto an existing hash.
|
|---|
| 376 | ($hash->{admin},$hash->{self_edit},
|
|---|
| 377 | $hash->{group_create},$hash->{group_edit},$hash->{group_delete},
|
|---|
| 378 | $hash->{user_create},$hash->{user_edit},$hash->{user_delete},
|
|---|
| 379 | $hash->{domain_create},$hash->{domain_edit},$hash->{domain_delete},
|
|---|
| 380 | $hash->{record_create},$hash->{record_edit},$hash->{record_delete})
|
|---|
| 381 | = $sth->fetchrow_array;
|
|---|
| 382 |
|
|---|
| 383 | } # end getPermissions()
|
|---|
| 384 |
|
|---|
| 385 |
|
|---|
| 386 | ## DNSDB::changePermissions()
|
|---|
| 387 | # Update an ACL entry
|
|---|
| 388 | # Takes a db handle, type, owner-id, and hashref for the changed permissions.
|
|---|
| 389 | sub changePermissions {
|
|---|
| 390 | my $dbh = shift;
|
|---|
| 391 | my $type = shift;
|
|---|
| 392 | my $id = shift;
|
|---|
| 393 | my $newperms = shift;
|
|---|
| 394 | my $inherit = shift || 0;
|
|---|
| 395 |
|
|---|
| 396 | my $failmsg = '';
|
|---|
| 397 |
|
|---|
| 398 | # see if we're switching from inherited to custom. for bonus points,
|
|---|
| 399 | # snag the permid and parent permid anyway, since we'll need the permid
|
|---|
| 400 | # to set/alter custom perms, and both if we're switching from custom to
|
|---|
| 401 | # inherited.
|
|---|
| 402 | my $sth = $dbh->prepare("SELECT (u.permission_id=g.permission_id) AS was_inherited,u.permission_id,g.permission_id".
|
|---|
| 403 | " FROM ".($type eq 'user' ? 'users' : 'groups')." u ".
|
|---|
| 404 | " JOIN groups g ON u.".($type eq 'user' ? '' : 'parent_')."group_id=g.group_id ".
|
|---|
| 405 | " WHERE u.".($type eq 'user' ? 'user' : 'group')."_id=?");
|
|---|
| 406 | $sth->execute($id);
|
|---|
| 407 |
|
|---|
| 408 | my ($wasinherited,$permid,$parpermid) = $sth->fetchrow_array;
|
|---|
| 409 |
|
|---|
| 410 | # hack phtoui
|
|---|
| 411 | # group id 1 is "special" in that it's it's own parent (err... possibly.)
|
|---|
| 412 | # may make its parent id 0 which doesn't exist, and as a bonus is Perl-false.
|
|---|
| 413 | $wasinherited = 0 if ($type eq 'group' && $id == 1);
|
|---|
| 414 |
|
|---|
| 415 | local $dbh->{AutoCommit} = 0;
|
|---|
| 416 | local $dbh->{RaiseError} = 1;
|
|---|
| 417 |
|
|---|
| 418 | # Wrap all the SQL in a transaction
|
|---|
| 419 | eval {
|
|---|
| 420 | if ($inherit) {
|
|---|
| 421 |
|
|---|
| 422 | $dbh->do("UPDATE ".($type eq 'user' ? 'users' : 'groups')." SET inherit_perm='t',permission_id=? ".
|
|---|
| 423 | "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($parpermid, $id) );
|
|---|
| 424 | $dbh->do("DELETE FROM permissions WHERE permission_id=?", undef, ($permid) );
|
|---|
| 425 |
|
|---|
| 426 | } else {
|
|---|
| 427 |
|
|---|
| 428 | if ($wasinherited) { # munge new permission entry in if we're switching from inherited perms
|
|---|
| 429 | ##fixme: need to add semirecursive bit to properly munge inherited permission ID on subgroups and users
|
|---|
| 430 | # ... if'n'when we have groups with fully inherited permissions.
|
|---|
| 431 | # SQL is coo
|
|---|
| 432 | $dbh->do("INSERT INTO permissions ($permlist,".($type eq 'user' ? 'user' : 'group')."_id) ".
|
|---|
| 433 | "SELECT $permlist,? FROM permissions WHERE permission_id=?", undef, ($id,$permid) );
|
|---|
| 434 | ($permid) = $dbh->selectrow_array("SELECT permission_id FROM permissions ".
|
|---|
| 435 | "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($id) );
|
|---|
| 436 | $dbh->do("UPDATE ".($type eq 'user' ? 'users' : 'groups')." SET inherit_perm='f',permission_id=? ".
|
|---|
| 437 | "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($permid, $id) );
|
|---|
| 438 | }
|
|---|
| 439 |
|
|---|
| 440 | # and now set the permissions we were passed
|
|---|
| 441 | foreach (@permtypes) {
|
|---|
| 442 | if (defined ($newperms->{$_})) {
|
|---|
| 443 | $dbh->do("UPDATE permissions SET $_=? WHERE permission_id=?", undef, ($newperms->{$_},$permid) );
|
|---|
| 444 | }
|
|---|
| 445 | }
|
|---|
| 446 |
|
|---|
| 447 | } # (inherited->)? custom
|
|---|
| 448 |
|
|---|
| 449 | $dbh->commit;
|
|---|
| 450 | }; # end eval
|
|---|
| 451 | if ($@) {
|
|---|
| 452 | my $msg = $@;
|
|---|
| 453 | eval { $dbh->rollback; };
|
|---|
| 454 | return ('FAIL',"$failmsg: $msg ($permid)");
|
|---|
| 455 | } else {
|
|---|
| 456 | return ('OK',$permid);
|
|---|
| 457 | }
|
|---|
| 458 |
|
|---|
| 459 | } # end changePermissions()
|
|---|
| 460 |
|
|---|
| 461 |
|
|---|
| 462 | ## DNSDB::comparePermissions()
|
|---|
| 463 | # Compare two permission hashes
|
|---|
| 464 | # Returns '>', '<', '=', '!'
|
|---|
| 465 | sub comparePermissions {
|
|---|
| 466 | my $p1 = shift;
|
|---|
| 467 | my $p2 = shift;
|
|---|
| 468 |
|
|---|
| 469 | my $retval = '='; # assume equality until proven otherwise
|
|---|
| 470 |
|
|---|
| 471 | no warnings "uninitialized";
|
|---|
| 472 |
|
|---|
| 473 | foreach (@permtypes) {
|
|---|
| 474 | next if $p1->{$_} == $p2->{$_}; # equal is good
|
|---|
| 475 | if ($p1->{$_} && !$p2->{$_}) {
|
|---|
| 476 | if ($retval eq '<') { # if we've already found an unequal pair where
|
|---|
| 477 | $retval = '!'; # $p2 has more access, and we now find a pair
|
|---|
| 478 | last; # where $p1 has more access, the overall access
|
|---|
| 479 | } # is neither greater or lesser, it's unequal.
|
|---|
| 480 | $retval = '>';
|
|---|
| 481 | }
|
|---|
| 482 | if (!$p1->{$_} && $p2->{$_}) {
|
|---|
| 483 | if ($retval eq '>') { # if we've already found an unequal pair where
|
|---|
| 484 | $retval = '!'; # $p1 has more access, and we now find a pair
|
|---|
| 485 | last; # where $p2 has more access, the overall access
|
|---|
| 486 | } # is neither greater or lesser, it's unequal.
|
|---|
| 487 | $retval = '<';
|
|---|
| 488 | }
|
|---|
| 489 | }
|
|---|
| 490 | return $retval;
|
|---|
| 491 | } # end comparePermissions()
|
|---|
| 492 |
|
|---|
| 493 |
|
|---|
| 494 | ## DNSDB::changeGroup()
|
|---|
| 495 | # Change group ID of an entity
|
|---|
| 496 | # Takes a database handle, entity type, entity ID, and new group ID
|
|---|
| 497 | sub changeGroup {
|
|---|
| 498 | my $dbh = shift;
|
|---|
| 499 | my $type = shift;
|
|---|
| 500 | my $id = shift;
|
|---|
| 501 | my $newgrp = shift;
|
|---|
| 502 |
|
|---|
| 503 | ##fixme: fail on not enough args
|
|---|
| 504 | #return ('FAIL', "Missing
|
|---|
| 505 |
|
|---|
| 506 | if ($type eq 'domain') {
|
|---|
| 507 | $dbh->do("UPDATE domains SET group_id=? WHERE domain_id=?", undef, ($newgrp, $id))
|
|---|
| 508 | or return ('FAIL','Group change failed: '.$dbh->errstr);
|
|---|
| 509 | } elsif ($type eq 'user') {
|
|---|
| 510 | $dbh->do("UPDATE users SET group_id=? WHERE user_id=?", undef, ($newgrp, $id))
|
|---|
| 511 | or return ('FAIL','Group change failed: '.$dbh->errstr);
|
|---|
| 512 | } elsif ($type eq 'group') {
|
|---|
| 513 | $dbh->do("UPDATE groups SET parent_group_id=? WHERE group_id=?", undef, ($newgrp, $id))
|
|---|
| 514 | or return ('FAIL','Group change failed: '.$dbh->errstr);
|
|---|
| 515 | }
|
|---|
| 516 | return ('OK','OK');
|
|---|
| 517 | } # end changeGroup()
|
|---|
| 518 |
|
|---|
| 519 |
|
|---|
| 520 | ## DNSDB::_log()
|
|---|
| 521 | # Log an action
|
|---|
| 522 | # Internal sub
|
|---|
| 523 | # Takes a database handle, domain_id, user_id, group_id, email, name and log entry
|
|---|
| 524 | ##fixme: convert to trailing hash for user info
|
|---|
| 525 | # User info must contain a (user ID OR username)+fullname
|
|---|
| 526 | sub _log {
|
|---|
| 527 | my $dbh = shift;
|
|---|
| 528 | my ($domain_id,$user_id,$group_id,$username,$name,$entry) = @_;
|
|---|
| 529 |
|
|---|
| 530 | ##fixme: need better way(s?) to snag userinfo for log entries. don't want to have
|
|---|
| 531 | # to pass around yet *another* constant (already passing $dbh, shouldn't need to)
|
|---|
| 532 | my $fullname;
|
|---|
| 533 | if (!$user_id) {
|
|---|
| 534 | ($user_id, $fullname) = $dbh->selectrow_array("SELECT user_id, firstname || ' ' || lastname FROM users".
|
|---|
| 535 | " WHERE username=?", undef, ($username));
|
|---|
| 536 | } elsif (!$username) {
|
|---|
| 537 | ($username, $fullname) = $dbh->selectrow_array("SELECT username, firstname || ' ' || lastname FROM users".
|
|---|
| 538 | " WHERE user_id=?", undef, ($user_id));
|
|---|
| 539 | } else {
|
|---|
| 540 | ($fullname) = $dbh->selectrow_array("SELECT firstname || ' ' || lastname FROM users".
|
|---|
| 541 | " WHERE user_id=?", undef, ($user_id));
|
|---|
| 542 | }
|
|---|
| 543 |
|
|---|
| 544 | $name = $fullname if !$name;
|
|---|
| 545 |
|
|---|
| 546 | ##fixme: farm out the actual logging to different subs for file, syslog, internal, etc based on config
|
|---|
| 547 | $dbh->do("INSERT INTO log (domain_id,user_id,group_id,email,name,entry) VALUES (?,?,?,?,?,?)", undef,
|
|---|
| 548 | ($domain_id,$user_id,$group_id,$username,$name,$entry));
|
|---|
| 549 | # 123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890
|
|---|
| 550 | # 1 2 3 4 5 6 7
|
|---|
| 551 | } # end _log
|
|---|
| 552 |
|
|---|
| 553 |
|
|---|
| 554 | ##
|
|---|
| 555 | ## Processing subs
|
|---|
| 556 | ##
|
|---|
| 557 |
|
|---|
| 558 | ## DNSDB::addDomain()
|
|---|
| 559 | # Add a domain
|
|---|
| 560 | # Takes a database handle, domain name, numeric group, boolean(ish) state (active/inactive),
|
|---|
| 561 | # and user info hash (for logging).
|
|---|
| 562 | # Returns a status code and message
|
|---|
| 563 | sub addDomain {
|
|---|
| 564 | $errstr = '';
|
|---|
| 565 | my $dbh = shift;
|
|---|
| 566 | return ('FAIL',"Need database handle") if !$dbh;
|
|---|
| 567 | my $domain = shift;
|
|---|
| 568 | return ('FAIL',"Domain must not be blank") if !$domain;
|
|---|
| 569 | my $group = shift;
|
|---|
| 570 | return ('FAIL',"Need group") if !defined($group);
|
|---|
| 571 | my $state = shift;
|
|---|
| 572 | return ('FAIL',"Need domain status") if !defined($state);
|
|---|
| 573 |
|
|---|
| 574 | my %userinfo = @_; # remaining bits.
|
|---|
| 575 | # user ID, username, user full name
|
|---|
| 576 |
|
|---|
| 577 | $state = 1 if $state =~ /^active$/;
|
|---|
| 578 | $state = 1 if $state =~ /^on$/;
|
|---|
| 579 | $state = 0 if $state =~ /^inactive$/;
|
|---|
| 580 | $state = 0 if $state =~ /^off$/;
|
|---|
| 581 |
|
|---|
| 582 | return ('FAIL',"Invalid domain status") if $state !~ /^\d+$/;
|
|---|
| 583 |
|
|---|
| 584 | return ('FAIL', "Invalid characters in domain") if $domain !~ /^[a-zA-Z0-9_.-]+$/;
|
|---|
| 585 |
|
|---|
| 586 | my $sth = $dbh->prepare("SELECT domain_id FROM domains WHERE domain=?");
|
|---|
| 587 | my $dom_id;
|
|---|
| 588 |
|
|---|
| 589 | # quick check to start to see if we've already got one
|
|---|
| 590 | $sth->execute($domain);
|
|---|
| 591 | ($dom_id) = $sth->fetchrow_array;
|
|---|
| 592 |
|
|---|
| 593 | return ('FAIL', "Domain already exists") if $dom_id;
|
|---|
| 594 |
|
|---|
| 595 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 596 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 597 | local $dbh->{AutoCommit} = 0;
|
|---|
| 598 | local $dbh->{RaiseError} = 1;
|
|---|
| 599 |
|
|---|
| 600 | # Wrap all the SQL in a transaction
|
|---|
| 601 | eval {
|
|---|
| 602 | # insert the domain...
|
|---|
| 603 | $dbh->do("INSERT INTO domains (domain,group_id,status) VALUES (?,?,?)", undef, ($domain, $group, $state));
|
|---|
| 604 |
|
|---|
| 605 | # get the ID...
|
|---|
| 606 | ($dom_id) = $dbh->selectrow_array("SELECT domain_id FROM domains WHERE domain=?", undef, ($domain));
|
|---|
| 607 |
|
|---|
| 608 | _log($dbh, $dom_id, $userinfo{id}, $group, $userinfo{name}, $userinfo{fullname},
|
|---|
| 609 | "Added ".($state ? 'active' : 'inactive')." domain $domain");
|
|---|
| 610 |
|
|---|
| 611 | # ... and now we construct the standard records from the default set. NB: group should be variable.
|
|---|
| 612 | my $sth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl FROM default_records WHERE group_id=?");
|
|---|
| 613 | my $sth_in = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,distance,weight,port,ttl)".
|
|---|
| 614 | " VALUES ($dom_id,?,?,?,?,?,?,?)");
|
|---|
| 615 | $sth->execute($group);
|
|---|
| 616 | while (my ($host,$type,$val,$dist,$weight,$port,$ttl) = $sth->fetchrow_array()) {
|
|---|
| 617 | $host =~ s/DOMAIN/$domain/g;
|
|---|
| 618 | $val =~ s/DOMAIN/$domain/g;
|
|---|
| 619 | $sth_in->execute($host,$type,$val,$dist,$weight,$port,$ttl);
|
|---|
| 620 | if ($typemap{$type} eq 'SOA') {
|
|---|
| 621 | my @tmp1 = split /:/, $host;
|
|---|
| 622 | my @tmp2 = split /:/, $val;
|
|---|
| 623 | _log($dbh, $dom_id, $userinfo{id}, $group, $userinfo{name}, $userinfo{fullname},
|
|---|
| 624 | "[new $domain] Added SOA record [contact $tmp1[0]] [master $tmp1[1]] ".
|
|---|
| 625 | "[refresh $tmp2[0]] [retry $tmp2[1]] [expire $tmp2[2]] [minttl $tmp2[3]], TTL $ttl");
|
|---|
| 626 | } else {
|
|---|
| 627 | my $logentry = "[new $domain] Added record '$host $typemap{$type}";
|
|---|
| 628 | $logentry .= " [distance $dist]" if $typemap{$type} eq 'MX';
|
|---|
| 629 | $logentry .= " [priority $dist] [weight $weight] [port $port]" if $typemap{$type} eq 'SRV';
|
|---|
| 630 | _log($dbh, $dom_id, $userinfo{id}, $group, $userinfo{name}, $userinfo{fullname},
|
|---|
| 631 | $logentry." $val', TTL $ttl");
|
|---|
| 632 | }
|
|---|
| 633 | }
|
|---|
| 634 |
|
|---|
| 635 | # once we get here, we should have suceeded.
|
|---|
| 636 | $dbh->commit;
|
|---|
| 637 | }; # end eval
|
|---|
| 638 |
|
|---|
| 639 | if ($@) {
|
|---|
| 640 | my $msg = $@;
|
|---|
| 641 | eval { $dbh->rollback; };
|
|---|
| 642 | return ('FAIL',$msg);
|
|---|
| 643 | } else {
|
|---|
| 644 | return ('OK',$dom_id);
|
|---|
| 645 | }
|
|---|
| 646 | } # end addDomain
|
|---|
| 647 |
|
|---|
| 648 |
|
|---|
| 649 | ## DNSDB::delDomain()
|
|---|
| 650 | # Delete a domain.
|
|---|
| 651 | # for now, just delete the records, then the domain.
|
|---|
| 652 | # later we may want to archive it in some way instead (status code 2, for example?)
|
|---|
| 653 | sub delDomain {
|
|---|
| 654 | my $dbh = shift;
|
|---|
| 655 | my $domid = shift;
|
|---|
| 656 |
|
|---|
| 657 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 658 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 659 | local $dbh->{AutoCommit} = 0;
|
|---|
| 660 | local $dbh->{RaiseError} = 1;
|
|---|
| 661 |
|
|---|
| 662 | my $failmsg = '';
|
|---|
| 663 |
|
|---|
| 664 | # Wrap all the SQL in a transaction
|
|---|
| 665 | eval {
|
|---|
| 666 | my $sth = $dbh->prepare("delete from records where domain_id=?");
|
|---|
| 667 | $failmsg = "Failure removing domain records";
|
|---|
| 668 | $sth->execute($domid);
|
|---|
| 669 | $sth = $dbh->prepare("delete from domains where domain_id=?");
|
|---|
| 670 | $failmsg = "Failure removing domain";
|
|---|
| 671 | $sth->execute($domid);
|
|---|
| 672 |
|
|---|
| 673 | # once we get here, we should have suceeded.
|
|---|
| 674 | $dbh->commit;
|
|---|
| 675 | }; # end eval
|
|---|
| 676 |
|
|---|
| 677 | if ($@) {
|
|---|
| 678 | my $msg = $@;
|
|---|
| 679 | eval { $dbh->rollback; };
|
|---|
| 680 | return ('FAIL',"$failmsg: $msg");
|
|---|
| 681 | } else {
|
|---|
| 682 | return ('OK','OK');
|
|---|
| 683 | }
|
|---|
| 684 |
|
|---|
| 685 | } # end delDomain()
|
|---|
| 686 |
|
|---|
| 687 |
|
|---|
| 688 | ## DNSDB::domainName()
|
|---|
| 689 | # Return the domain name based on a domain ID
|
|---|
| 690 | # Takes a database handle and the domain ID
|
|---|
| 691 | # Returns the domain name or undef on failure
|
|---|
| 692 | sub domainName {
|
|---|
| 693 | $errstr = '';
|
|---|
| 694 | my $dbh = shift;
|
|---|
| 695 | my $domid = shift;
|
|---|
| 696 | my ($domname) = $dbh->selectrow_array("SELECT domain FROM domains WHERE domain_id=?", undef, ($domid) );
|
|---|
| 697 | $errstr = $DBI::errstr if !$domname;
|
|---|
| 698 | return $domname if $domname;
|
|---|
| 699 | } # end domainName()
|
|---|
| 700 |
|
|---|
| 701 |
|
|---|
| 702 | ## DNSDB::domainID()
|
|---|
| 703 | # Takes a database handle and domain name
|
|---|
| 704 | # Returns the domain ID number
|
|---|
| 705 | sub domainID {
|
|---|
| 706 | $errstr = '';
|
|---|
| 707 | my $dbh = shift;
|
|---|
| 708 | my $domain = shift;
|
|---|
| 709 | my ($domid) = $dbh->selectrow_array("SELECT domain_id FROM domains WHERE domain=?", undef, ($domain) );
|
|---|
| 710 | $errstr = $DBI::errstr if !$domid;
|
|---|
| 711 | return $domid if $domid;
|
|---|
| 712 | } # end domainID()
|
|---|
| 713 |
|
|---|
| 714 |
|
|---|
| 715 | ## DNSDB::addGroup()
|
|---|
| 716 | # Add a group
|
|---|
| 717 | # Takes a database handle, group name, parent group, hashref for permissions,
|
|---|
| 718 | # and optional template-vs-cloneme flag
|
|---|
| 719 | # Returns a status code and message
|
|---|
| 720 | sub addGroup {
|
|---|
| 721 | $errstr = '';
|
|---|
| 722 | my $dbh = shift;
|
|---|
| 723 | my $groupname = shift;
|
|---|
| 724 | my $pargroup = shift;
|
|---|
| 725 | my $permissions = shift;
|
|---|
| 726 |
|
|---|
| 727 | # 0 indicates "custom", hardcoded.
|
|---|
| 728 | # Any other value clones that group's default records, if it exists.
|
|---|
| 729 | my $inherit = shift || 0;
|
|---|
| 730 | ##fixme: need a flag to indicate clone records or <?> ?
|
|---|
| 731 |
|
|---|
| 732 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 733 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 734 | local $dbh->{AutoCommit} = 0;
|
|---|
| 735 | local $dbh->{RaiseError} = 1;
|
|---|
| 736 |
|
|---|
| 737 | my $sth = $dbh->prepare("SELECT group_id FROM groups WHERE group_name=?");
|
|---|
| 738 | my $group_id;
|
|---|
| 739 |
|
|---|
| 740 | # quick check to start to see if we've already got one
|
|---|
| 741 | $sth->execute($groupname);
|
|---|
| 742 | ($group_id) = $sth->fetchrow_array;
|
|---|
| 743 |
|
|---|
| 744 | return ('FAIL', "Group already exists") if $group_id;
|
|---|
| 745 |
|
|---|
| 746 | # Wrap all the SQL in a transaction
|
|---|
| 747 | eval {
|
|---|
| 748 | $sth = $dbh->prepare("INSERT INTO groups (parent_group_id,group_name) VALUES (?,?)");
|
|---|
| 749 | $sth->execute($pargroup,$groupname);
|
|---|
| 750 |
|
|---|
| 751 | $sth = $dbh->prepare("SELECT group_id FROM groups WHERE group_name=?");
|
|---|
| 752 | $sth->execute($groupname);
|
|---|
| 753 | my ($groupid) = $sth->fetchrow_array();
|
|---|
| 754 |
|
|---|
| 755 | # Permissions
|
|---|
| 756 | if ($inherit) {
|
|---|
| 757 | } else {
|
|---|
| 758 | my @permvals;
|
|---|
| 759 | foreach (@permtypes) {
|
|---|
| 760 | if (!defined ($permissions->{$_})) {
|
|---|
| 761 | push @permvals, 0;
|
|---|
| 762 | } else {
|
|---|
| 763 | push @permvals, $permissions->{$_};
|
|---|
| 764 | }
|
|---|
| 765 | }
|
|---|
| 766 |
|
|---|
| 767 | $sth = $dbh->prepare("INSERT INTO permissions (group_id,$permlist) values (?".',?'x($#permtypes+1).")");
|
|---|
| 768 | $sth->execute($groupid,@permvals);
|
|---|
| 769 |
|
|---|
| 770 | $sth = $dbh->prepare("SELECT permission_id FROM permissions WHERE group_id=?");
|
|---|
| 771 | $sth->execute($groupid);
|
|---|
| 772 | my ($permid) = $sth->fetchrow_array();
|
|---|
| 773 |
|
|---|
| 774 | $dbh->do("UPDATE groups SET permission_id=$permid WHERE group_id=$groupid");
|
|---|
| 775 | } # done permission fiddling
|
|---|
| 776 |
|
|---|
| 777 | # Default records
|
|---|
| 778 | $sth = $dbh->prepare("INSERT INTO default_records (group_id,host,type,val,distance,weight,port,ttl) ".
|
|---|
| 779 | "VALUES ($groupid,?,?,?,?,?,?,?)");
|
|---|
| 780 | if ($inherit) {
|
|---|
| 781 | # Duplicate records from parent. Actually relying on inherited records feels
|
|---|
| 782 | # very fragile, and it would be problematic to roll over at a later time.
|
|---|
| 783 | my $sth2 = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl FROM default_records WHERE group_id=?");
|
|---|
| 784 | $sth2->execute($pargroup);
|
|---|
| 785 | while (my @clonedata = $sth2->fetchrow_array) {
|
|---|
| 786 | $sth->execute(@clonedata);
|
|---|
| 787 | }
|
|---|
| 788 | } else {
|
|---|
| 789 | ##fixme: Hardcoding is Bad, mmmmkaaaay?
|
|---|
| 790 | # reasonable basic defaults for SOA, MX, NS, and minimal hosting
|
|---|
| 791 | # could load from a config file, but somewhere along the line we need hardcoded bits.
|
|---|
| 792 | $sth->execute('ns1.example.com:hostmaster.example.com', 6, '10800:3600:604800:10800', 0, 0, 0, 86400);
|
|---|
| 793 | $sth->execute('DOMAIN', 1, '192.168.4.2', 0, 0, 0, 7200);
|
|---|
| 794 | $sth->execute('DOMAIN', 15, 'mx.example.com', 10, 0, 0, 7200);
|
|---|
| 795 | $sth->execute('DOMAIN', 2, 'ns1.example.com', 0, 0, 0, 7200);
|
|---|
| 796 | $sth->execute('DOMAIN', 2, 'ns2.example.com', 0, 0, 0, 7200);
|
|---|
| 797 | $sth->execute('www.DOMAIN', 5, 'DOMAIN', 0, 0, 0, 7200);
|
|---|
| 798 | }
|
|---|
| 799 |
|
|---|
| 800 | # once we get here, we should have suceeded.
|
|---|
| 801 | $dbh->commit;
|
|---|
| 802 | }; # end eval
|
|---|
| 803 |
|
|---|
| 804 | if ($@) {
|
|---|
| 805 | my $msg = $@;
|
|---|
| 806 | eval { $dbh->rollback; };
|
|---|
| 807 | return ('FAIL',$msg);
|
|---|
| 808 | } else {
|
|---|
| 809 | return ('OK','OK');
|
|---|
| 810 | }
|
|---|
| 811 |
|
|---|
| 812 | } # end addGroup()
|
|---|
| 813 |
|
|---|
| 814 |
|
|---|
| 815 | ## DNSDB::delGroup()
|
|---|
| 816 | # Delete a group.
|
|---|
| 817 | # Takes a group ID
|
|---|
| 818 | # Returns a status code and message
|
|---|
| 819 | sub delGroup {
|
|---|
| 820 | my $dbh = shift;
|
|---|
| 821 | my $groupid = shift;
|
|---|
| 822 |
|
|---|
| 823 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 824 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 825 | local $dbh->{AutoCommit} = 0;
|
|---|
| 826 | local $dbh->{RaiseError} = 1;
|
|---|
| 827 |
|
|---|
| 828 | ##fixme: locate "knowable" error conditions and deal with them before the eval
|
|---|
| 829 | # ... or inside, whatever.
|
|---|
| 830 | # -> domains still exist in group
|
|---|
| 831 | # -> ...
|
|---|
| 832 | my $failmsg = '';
|
|---|
| 833 |
|
|---|
| 834 | # Wrap all the SQL in a transaction
|
|---|
| 835 | eval {
|
|---|
| 836 | my $sth = $dbh->prepare("SELECT count(*) FROM domains WHERE group_id=?");
|
|---|
| 837 | $sth->execute($groupid);
|
|---|
| 838 | my ($domcnt) = $sth->fetchrow_array;
|
|---|
| 839 | $failmsg = "Can't remove group ".groupName($dbh,$groupid);
|
|---|
| 840 | die "$domcnt domains still in group\n" if $domcnt;
|
|---|
| 841 |
|
|---|
| 842 | $sth = $dbh->prepare("delete from default_records where group_id=?");
|
|---|
| 843 | $failmsg = "Failed to delete default records for ".groupName($dbh,$groupid);
|
|---|
| 844 | $sth->execute($groupid);
|
|---|
| 845 | $sth = $dbh->prepare("delete from groups where group_id=?");
|
|---|
| 846 | $failmsg = "Failed to remove group ".groupName($dbh,$groupid);
|
|---|
| 847 | $sth->execute($groupid);
|
|---|
| 848 |
|
|---|
| 849 | # once we get here, we should have suceeded.
|
|---|
| 850 | $dbh->commit;
|
|---|
| 851 | }; # end eval
|
|---|
| 852 |
|
|---|
| 853 | if ($@) {
|
|---|
| 854 | my $msg = $@;
|
|---|
| 855 | eval { $dbh->rollback; };
|
|---|
| 856 | return ('FAIL',"$failmsg: $msg");
|
|---|
| 857 | } else {
|
|---|
| 858 | return ('OK','OK');
|
|---|
| 859 | }
|
|---|
| 860 | } # end delGroup()
|
|---|
| 861 |
|
|---|
| 862 |
|
|---|
| 863 | ## DNSDB::getChildren()
|
|---|
| 864 | # Get a list of all groups whose parent^n is group <n>
|
|---|
| 865 | # Takes a database handle, group ID, reference to an array to put the group IDs in,
|
|---|
| 866 | # and an optional flag to return only immediate children or all children-of-children
|
|---|
| 867 | # default to returning all children
|
|---|
| 868 | # Calls itself
|
|---|
| 869 | sub getChildren {
|
|---|
| 870 | $errstr = '';
|
|---|
| 871 | my $dbh = shift;
|
|---|
| 872 | my $rootgroup = shift;
|
|---|
| 873 | my $groupdest = shift;
|
|---|
| 874 | my $immed = shift || 'all';
|
|---|
| 875 |
|
|---|
| 876 | # special break for default group; otherwise we get stuck.
|
|---|
| 877 | if ($rootgroup == 1) {
|
|---|
| 878 | # by definition, group 1 is the Root Of All Groups
|
|---|
| 879 | my $sth = $dbh->prepare("SELECT group_id FROM groups WHERE NOT (group_id=1)".
|
|---|
| 880 | ($immed ne 'all' ? " AND parent_group_id=1" : ''));
|
|---|
| 881 | $sth->execute;
|
|---|
| 882 | while (my @this = $sth->fetchrow_array) {
|
|---|
| 883 | push @$groupdest, @this;
|
|---|
| 884 | }
|
|---|
| 885 | } else {
|
|---|
| 886 | my $sth = $dbh->prepare("SELECT group_id FROM groups WHERE parent_group_id=?");
|
|---|
| 887 | $sth->execute($rootgroup);
|
|---|
| 888 | return if $sth->rows == 0;
|
|---|
| 889 | my @grouplist;
|
|---|
| 890 | while (my ($group) = $sth->fetchrow_array) {
|
|---|
| 891 | push @$groupdest, $group;
|
|---|
| 892 | getChildren($dbh,$group,$groupdest) if $immed eq 'all';
|
|---|
| 893 | }
|
|---|
| 894 | }
|
|---|
| 895 | } # end getChildren()
|
|---|
| 896 |
|
|---|
| 897 |
|
|---|
| 898 | ## DNSDB::groupName()
|
|---|
| 899 | # Return the group name based on a group ID
|
|---|
| 900 | # Takes a database handle and the group ID
|
|---|
| 901 | # Returns the group name or undef on failure
|
|---|
| 902 | sub groupName {
|
|---|
| 903 | $errstr = '';
|
|---|
| 904 | my $dbh = shift;
|
|---|
| 905 | my $groupid = shift;
|
|---|
| 906 | my $sth = $dbh->prepare("SELECT group_name FROM groups WHERE group_id=?");
|
|---|
| 907 | $sth->execute($groupid);
|
|---|
| 908 | my ($groupname) = $sth->fetchrow_array();
|
|---|
| 909 | $errstr = $DBI::errstr if !$groupname;
|
|---|
| 910 | return $groupname if $groupname;
|
|---|
| 911 | } # end groupName
|
|---|
| 912 |
|
|---|
| 913 |
|
|---|
| 914 | ## DNSDB::groupID()
|
|---|
| 915 | # Return the group ID based on the group name
|
|---|
| 916 | # Takes a database handle and the group name
|
|---|
| 917 | # Returns the group ID or undef on failure
|
|---|
| 918 | sub groupID {
|
|---|
| 919 | $errstr = '';
|
|---|
| 920 | my $dbh = shift;
|
|---|
| 921 | my $group = shift;
|
|---|
| 922 | my ($grpid) = $dbh->selectrow_array("SELECT group_id FROM groups WHERE group=?", undef, ($group) );
|
|---|
| 923 | $errstr = $DBI::errstr if !$grpid;
|
|---|
| 924 | return $grpid if $grpid;
|
|---|
| 925 | } # end groupID()
|
|---|
| 926 |
|
|---|
| 927 |
|
|---|
| 928 | ## DNSDB::addUser()
|
|---|
| 929 | # Add a user.
|
|---|
| 930 | # Takes a DB handle, username, group ID, password, state (active/inactive).
|
|---|
| 931 | # Optionally accepts:
|
|---|
| 932 | # user type (user/admin) - defaults to user
|
|---|
| 933 | # permissions string - defaults to inherit from group
|
|---|
| 934 | # three valid forms:
|
|---|
| 935 | # i - Inherit permissions
|
|---|
| 936 | # c:<user_id> - Clone permissions from <user_id>
|
|---|
| 937 | # C:<permission list> - Set these specific permissions
|
|---|
| 938 | # first name - defaults to username
|
|---|
| 939 | # last name - defaults to blank
|
|---|
| 940 | # phone - defaults to blank (could put other data within column def)
|
|---|
| 941 | # Returns (OK,<uid>) on success, (FAIL,<message>) on failure
|
|---|
| 942 | sub addUser {
|
|---|
| 943 | $errstr = '';
|
|---|
| 944 | my $dbh = shift;
|
|---|
| 945 | my $username = shift;
|
|---|
| 946 | my $group = shift;
|
|---|
| 947 | my $pass = shift;
|
|---|
| 948 | my $state = shift;
|
|---|
| 949 |
|
|---|
| 950 | return ('FAIL', "Missing one or more required entries") if !defined($state);
|
|---|
| 951 | return ('FAIL', "Username must not be blank") if !$username;
|
|---|
| 952 |
|
|---|
| 953 | my $type = shift || 'u'; # create limited users by default - fwiw, not sure yet how this will interact with ACLs
|
|---|
| 954 |
|
|---|
| 955 | my $permstring = shift || 'i'; # default is to inhert permissions from group
|
|---|
| 956 |
|
|---|
| 957 | my $fname = shift || $username;
|
|---|
| 958 | my $lname = shift || '';
|
|---|
| 959 | my $phone = shift || ''; # not going format-check
|
|---|
| 960 |
|
|---|
| 961 | my $sth = $dbh->prepare("SELECT user_id FROM users WHERE username=?");
|
|---|
| 962 | my $user_id;
|
|---|
| 963 |
|
|---|
| 964 | # quick check to start to see if we've already got one
|
|---|
| 965 | $sth->execute($username);
|
|---|
| 966 | ($user_id) = $sth->fetchrow_array;
|
|---|
| 967 |
|
|---|
| 968 | return ('FAIL', "User already exists") if $user_id;
|
|---|
| 969 |
|
|---|
| 970 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 971 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 972 | local $dbh->{AutoCommit} = 0;
|
|---|
| 973 | local $dbh->{RaiseError} = 1;
|
|---|
| 974 |
|
|---|
| 975 | my $failmsg = '';
|
|---|
| 976 |
|
|---|
| 977 | # Wrap all the SQL in a transaction
|
|---|
| 978 | eval {
|
|---|
| 979 | # insert the user... note we set inherited perms by default since
|
|---|
| 980 | # it's simple and cleans up some other bits of state
|
|---|
| 981 | my $sth = $dbh->prepare("INSERT INTO users ".
|
|---|
| 982 | "(group_id,username,password,firstname,lastname,phone,type,status,permission_id,inherit_perm) ".
|
|---|
| 983 | "VALUES (?,?,?,?,?,?,?,?,(SELECT permission_id FROM permissions WHERE group_id=?),'t')");
|
|---|
| 984 | $sth->execute($group,$username,unix_md5_crypt($pass),$fname,$lname,$phone,$type,$state,$group);
|
|---|
| 985 |
|
|---|
| 986 | # get the ID...
|
|---|
| 987 | ($user_id) = $dbh->selectrow_array("SELECT currval('users_user_id_seq')");
|
|---|
| 988 |
|
|---|
| 989 | # Permissions! Gotta set'em all!
|
|---|
| 990 | die "Invalid permission string $permstring"
|
|---|
| 991 | if $permstring !~ /^(?:
|
|---|
| 992 | i # inherit
|
|---|
| 993 | |c:\d+ # clone
|
|---|
| 994 | # custom. no, the leading , is not a typo
|
|---|
| 995 | |C:(?:,(?:group|user|domain|record|self)_(?:edit|create|delete))*
|
|---|
| 996 | )$/x;
|
|---|
| 997 | # bleh. I'd call another function to do my dirty work, but we're in the middle of a transaction already.
|
|---|
| 998 | if ($permstring ne 'i') {
|
|---|
| 999 | # for cloned or custom permissions, we have to create a new permissions entry.
|
|---|
| 1000 | my $clonesrc = $group;
|
|---|
| 1001 | if ($permstring =~ /^c:(\d+)/) { $clonesrc = $1; }
|
|---|
| 1002 | $dbh->do("INSERT INTO permissions ($permlist,user_id) ".
|
|---|
| 1003 | "SELECT $permlist,? FROM permissions WHERE permission_id=".
|
|---|
| 1004 | "(SELECT permission_id FROM permissions WHERE ".($permstring =~ /^c:/ ? 'user' : 'group')."_id=?)",
|
|---|
| 1005 | undef, ($user_id,$clonesrc) );
|
|---|
| 1006 | $dbh->do("UPDATE users SET permission_id=".
|
|---|
| 1007 | "(SELECT permission_id FROM permissions WHERE user_id=?) ".
|
|---|
| 1008 | "WHERE user_id=?", undef, ($user_id, $user_id) );
|
|---|
| 1009 | }
|
|---|
| 1010 | if ($permstring =~ /^C:/) {
|
|---|
| 1011 | # finally for custom permissions, we set the passed-in permissions (and unset
|
|---|
| 1012 | # any that might have been brought in by the clone operation above)
|
|---|
| 1013 | my ($permid) = $dbh->selectrow_array("SELECT permission_id FROM permissions WHERE user_id=?",
|
|---|
| 1014 | undef, ($user_id) );
|
|---|
| 1015 | foreach (@permtypes) {
|
|---|
| 1016 | if ($permstring =~ /,$_/) {
|
|---|
| 1017 | $dbh->do("UPDATE permissions SET $_='t' WHERE permission_id=?", undef, ($permid) );
|
|---|
| 1018 | } else {
|
|---|
| 1019 | $dbh->do("UPDATE permissions SET $_='f' WHERE permission_id=?", undef, ($permid) );
|
|---|
| 1020 | }
|
|---|
| 1021 | }
|
|---|
| 1022 | }
|
|---|
| 1023 |
|
|---|
| 1024 | $dbh->do("UPDATE users SET inherit_perm='n' WHERE user_id=?", undef, ($user_id) );
|
|---|
| 1025 |
|
|---|
| 1026 | ##fixme: add another table to hold name/email for log table?
|
|---|
| 1027 |
|
|---|
| 1028 | # once we get here, we should have suceeded.
|
|---|
| 1029 | $dbh->commit;
|
|---|
| 1030 | }; # end eval
|
|---|
| 1031 |
|
|---|
| 1032 | if ($@) {
|
|---|
| 1033 | my $msg = $@;
|
|---|
| 1034 | eval { $dbh->rollback; };
|
|---|
| 1035 | return ('FAIL',$msg." $failmsg");
|
|---|
| 1036 | } else {
|
|---|
| 1037 | return ('OK',$user_id);
|
|---|
| 1038 | }
|
|---|
| 1039 | } # end addUser
|
|---|
| 1040 |
|
|---|
| 1041 |
|
|---|
| 1042 | ## DNSDB::checkUser()
|
|---|
| 1043 | # Check user/pass combo on login
|
|---|
| 1044 | sub checkUser {
|
|---|
| 1045 | my $dbh = shift;
|
|---|
| 1046 | my $user = shift;
|
|---|
| 1047 | my $inpass = shift;
|
|---|
| 1048 |
|
|---|
| 1049 | my $sth = $dbh->prepare("SELECT user_id,group_id,password,firstname,lastname FROM users WHERE username=?");
|
|---|
| 1050 | $sth->execute($user);
|
|---|
| 1051 | my ($uid,$gid,$pass,$fname,$lname) = $sth->fetchrow_array;
|
|---|
| 1052 | my $loginfailed = 1 if !defined($uid);
|
|---|
| 1053 |
|
|---|
| 1054 | if ($pass =~ m|^\$1\$([A-Za-z0-9/.]+)\$|) {
|
|---|
| 1055 | $loginfailed = 1 if $pass ne unix_md5_crypt($inpass,$1);
|
|---|
| 1056 | } else {
|
|---|
| 1057 | $loginfailed = 1 if $pass ne $inpass;
|
|---|
| 1058 | }
|
|---|
| 1059 |
|
|---|
| 1060 | # nnnngggg
|
|---|
| 1061 | return ($uid, $gid);
|
|---|
| 1062 | } # end checkUser
|
|---|
| 1063 |
|
|---|
| 1064 |
|
|---|
| 1065 | ## DNSDB:: updateUser()
|
|---|
| 1066 | # Update general data about user
|
|---|
| 1067 | sub updateUser {
|
|---|
| 1068 | my $dbh = shift;
|
|---|
| 1069 |
|
|---|
| 1070 | ##fixme: tweak calling convention so that we can update any given bit of data
|
|---|
| 1071 | my $uid = shift;
|
|---|
| 1072 | my $username = shift;
|
|---|
| 1073 | my $group = shift;
|
|---|
| 1074 | my $pass = shift;
|
|---|
| 1075 | my $state = shift;
|
|---|
| 1076 | my $type = shift || 'u';
|
|---|
| 1077 | my $fname = shift || $username;
|
|---|
| 1078 | my $lname = shift || '';
|
|---|
| 1079 | my $phone = shift || ''; # not going format-check
|
|---|
| 1080 |
|
|---|
| 1081 | my $failmsg = '';
|
|---|
| 1082 |
|
|---|
| 1083 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 1084 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 1085 | local $dbh->{AutoCommit} = 0;
|
|---|
| 1086 | local $dbh->{RaiseError} = 1;
|
|---|
| 1087 |
|
|---|
| 1088 | my $sth;
|
|---|
| 1089 |
|
|---|
| 1090 | # Password can be left blank; if so we assume there's one on file.
|
|---|
| 1091 | # Actual blank passwords are bad, mm'kay?
|
|---|
| 1092 | if (!$pass) {
|
|---|
| 1093 | $sth = $dbh->prepare("SELECT password FROM users WHERE user_id=?");
|
|---|
| 1094 | $sth->execute($uid);
|
|---|
| 1095 | ($pass) = $sth->fetchrow_array;
|
|---|
| 1096 | } else {
|
|---|
| 1097 | $pass = unix_md5_crypt($pass);
|
|---|
| 1098 | }
|
|---|
| 1099 |
|
|---|
| 1100 | eval {
|
|---|
| 1101 | my $sth = $dbh->prepare(q(
|
|---|
| 1102 | UPDATE users
|
|---|
| 1103 | SET username=?, password=?, firstname=?, lastname=?, phone=?, type=?, status=?
|
|---|
| 1104 | WHERE user_id=?
|
|---|
| 1105 | )
|
|---|
| 1106 | );
|
|---|
| 1107 | $sth->execute($username, $pass, $fname, $lname, $phone, $type, $state, $uid);
|
|---|
| 1108 | $dbh->commit;
|
|---|
| 1109 | };
|
|---|
| 1110 | if ($@) {
|
|---|
| 1111 | my $msg = $@;
|
|---|
| 1112 | eval { $dbh->rollback; };
|
|---|
| 1113 | return ('FAIL',"$failmsg: $msg");
|
|---|
| 1114 | } else {
|
|---|
| 1115 | return ('OK','OK');
|
|---|
| 1116 | }
|
|---|
| 1117 | } # end updateUser()
|
|---|
| 1118 |
|
|---|
| 1119 |
|
|---|
| 1120 | ## DNSDB::delUser()
|
|---|
| 1121 | #
|
|---|
| 1122 | sub delUser {
|
|---|
| 1123 | my $dbh = shift;
|
|---|
| 1124 | return ('FAIL',"Need database handle") if !$dbh;
|
|---|
| 1125 | my $userid = shift;
|
|---|
| 1126 | return ('FAIL',"Missing userid") if !defined($userid);
|
|---|
| 1127 |
|
|---|
| 1128 | my $sth = $dbh->prepare("delete from users where user_id=?");
|
|---|
| 1129 | $sth->execute($userid);
|
|---|
| 1130 |
|
|---|
| 1131 | return ('FAIL',"Couldn't remove user: ".$sth->errstr) if $sth->err;
|
|---|
| 1132 |
|
|---|
| 1133 | return ('OK','OK');
|
|---|
| 1134 |
|
|---|
| 1135 | } # end delUser
|
|---|
| 1136 |
|
|---|
| 1137 |
|
|---|
| 1138 | ## DNSDB::userFullName()
|
|---|
| 1139 | # Return a pretty string!
|
|---|
| 1140 | # Takes a user_id and optional printf-ish string to indicate which pieces where:
|
|---|
| 1141 | # %u for the username
|
|---|
| 1142 | # %f for the first name
|
|---|
| 1143 | # %l for the last name
|
|---|
| 1144 | # All other text in the passed string will be left as-is.
|
|---|
| 1145 | ##fixme: need a "smart" option too, so that missing/null/blank first/last names don't give funky output
|
|---|
| 1146 | sub userFullName {
|
|---|
| 1147 | $errstr = '';
|
|---|
| 1148 | my $dbh = shift;
|
|---|
| 1149 | my $userid = shift;
|
|---|
| 1150 | my $fullformat = shift || '%f %l (%u)';
|
|---|
| 1151 | my $sth = $dbh->prepare("select username,firstname,lastname from users where user_id=?");
|
|---|
| 1152 | $sth->execute($userid);
|
|---|
| 1153 | my ($uname,$fname,$lname) = $sth->fetchrow_array();
|
|---|
| 1154 | $errstr = $DBI::errstr if !$uname;
|
|---|
| 1155 |
|
|---|
| 1156 | $fullformat =~ s/\%u/$uname/g;
|
|---|
| 1157 | $fullformat =~ s/\%f/$fname/g;
|
|---|
| 1158 | $fullformat =~ s/\%l/$lname/g;
|
|---|
| 1159 |
|
|---|
| 1160 | return $fullformat;
|
|---|
| 1161 | } # end userFullName
|
|---|
| 1162 |
|
|---|
| 1163 |
|
|---|
| 1164 | ## DNSDB::userStatus()
|
|---|
| 1165 | # Sets and/or returns a user's status
|
|---|
| 1166 | # Takes a database handle, user ID and optionally a status argument
|
|---|
| 1167 | # Returns undef on errors.
|
|---|
| 1168 | sub userStatus {
|
|---|
| 1169 | my $dbh = shift;
|
|---|
| 1170 | my $id = shift;
|
|---|
| 1171 | my $newstatus = shift;
|
|---|
| 1172 |
|
|---|
| 1173 | return undef if $id !~ /^\d+$/;
|
|---|
| 1174 |
|
|---|
| 1175 | my $sth;
|
|---|
| 1176 |
|
|---|
| 1177 | # ooo, fun! let's see what we were passed for status
|
|---|
| 1178 | if ($newstatus) {
|
|---|
| 1179 | $sth = $dbh->prepare("update users set status=? where user_id=?");
|
|---|
| 1180 | # ass-u-me caller knows what's going on in full
|
|---|
| 1181 | if ($newstatus =~ /^[01]$/) { # only two valid for now.
|
|---|
| 1182 | $sth->execute($newstatus,$id);
|
|---|
| 1183 | } elsif ($newstatus =~ /^usero(?:n|ff)$/) {
|
|---|
| 1184 | $sth->execute(($newstatus eq 'useron' ? 1 : 0),$id);
|
|---|
| 1185 | }
|
|---|
| 1186 | }
|
|---|
| 1187 |
|
|---|
| 1188 | $sth = $dbh->prepare("select status from users where user_id=?");
|
|---|
| 1189 | $sth->execute($id);
|
|---|
| 1190 | my ($status) = $sth->fetchrow_array;
|
|---|
| 1191 | return $status;
|
|---|
| 1192 | } # end userStatus()
|
|---|
| 1193 |
|
|---|
| 1194 |
|
|---|
| 1195 | ## DNSDB::getUserData()
|
|---|
| 1196 | # Get misc user data for display
|
|---|
| 1197 | sub getUserData {
|
|---|
| 1198 | my $dbh = shift;
|
|---|
| 1199 | my $uid = shift;
|
|---|
| 1200 |
|
|---|
| 1201 | my $sth = $dbh->prepare("SELECT group_id,username,firstname,lastname,phone,type,status,inherit_perm ".
|
|---|
| 1202 | "FROM users WHERE user_id=?");
|
|---|
| 1203 | $sth->execute($uid);
|
|---|
| 1204 | return $sth->fetchrow_hashref();
|
|---|
| 1205 |
|
|---|
| 1206 | } # end getUserData()
|
|---|
| 1207 |
|
|---|
| 1208 |
|
|---|
| 1209 | ## DNSDB::getSOA()
|
|---|
| 1210 | # Return all suitable fields from an SOA record in separate elements of a hash
|
|---|
| 1211 | # Takes a database handle, default/live flag, and group (default) or domain (live) ID
|
|---|
| 1212 | sub getSOA {
|
|---|
| 1213 | $errstr = '';
|
|---|
| 1214 | my $dbh = shift;
|
|---|
| 1215 | my $def = shift;
|
|---|
| 1216 | my $id = shift;
|
|---|
| 1217 | my %ret;
|
|---|
| 1218 |
|
|---|
| 1219 | # (ab)use distance and weight columns to store SOA data
|
|---|
| 1220 |
|
|---|
| 1221 | my $sql = "SELECT record_id,host,val,ttl,distance from";
|
|---|
| 1222 | if ($def eq 'def' or $def eq 'y') {
|
|---|
| 1223 | $sql .= " default_records WHERE group_id=? AND type=$reverse_typemap{SOA}";
|
|---|
| 1224 | } else {
|
|---|
| 1225 | # we're editing a live SOA record; find based on domain
|
|---|
| 1226 | $sql .= " records WHERE domain_id=? AND type=$reverse_typemap{SOA}";
|
|---|
| 1227 | }
|
|---|
| 1228 | my $sth = $dbh->prepare($sql);
|
|---|
| 1229 | $sth->execute($id);
|
|---|
| 1230 |
|
|---|
| 1231 | my ($recid,$host,$val,$ttl,$serial) = $sth->fetchrow_array() or return;
|
|---|
| 1232 | my ($contact,$prins) = split /:/, $host;
|
|---|
| 1233 | my ($refresh,$retry,$expire,$minttl) = split /:/, $val;
|
|---|
| 1234 |
|
|---|
| 1235 | $ret{recid} = $recid;
|
|---|
| 1236 | $ret{ttl} = $ttl;
|
|---|
| 1237 | $ret{serial} = $serial;
|
|---|
| 1238 | $ret{prins} = $prins;
|
|---|
| 1239 | $ret{contact} = $contact;
|
|---|
| 1240 | $ret{refresh} = $refresh;
|
|---|
| 1241 | $ret{retry} = $retry;
|
|---|
| 1242 | $ret{expire} = $expire;
|
|---|
| 1243 | $ret{minttl} = $minttl;
|
|---|
| 1244 |
|
|---|
| 1245 | return %ret;
|
|---|
| 1246 | } # end getSOA()
|
|---|
| 1247 |
|
|---|
| 1248 |
|
|---|
| 1249 | ## DNSDB::getRecLine()
|
|---|
| 1250 | # Return all data fields for a zone record in separate elements of a hash
|
|---|
| 1251 | # Takes a database handle, default/live flag, and record ID
|
|---|
| 1252 | sub getRecLine {
|
|---|
| 1253 | $errstr = '';
|
|---|
| 1254 | my $dbh = shift;
|
|---|
| 1255 | my $def = shift;
|
|---|
| 1256 | my $id = shift;
|
|---|
| 1257 |
|
|---|
| 1258 | my $sql = "SELECT record_id,host,type,val,distance,weight,port,ttl".
|
|---|
| 1259 | (($def eq 'def' or $def eq 'y') ? ',group_id FROM default_' : ',domain_id FROM ').
|
|---|
| 1260 | "records WHERE record_id=?";
|
|---|
| 1261 | my $ret = $dbh->selectrow_hashref($sql, undef, ($id) );
|
|---|
| 1262 |
|
|---|
| 1263 | if ($dbh->err) {
|
|---|
| 1264 | $errstr = $DBI::errstr;
|
|---|
| 1265 | return undef;
|
|---|
| 1266 | }
|
|---|
| 1267 |
|
|---|
| 1268 | if (!$ret) {
|
|---|
| 1269 | $errstr = "No such record";
|
|---|
| 1270 | return undef;
|
|---|
| 1271 | }
|
|---|
| 1272 |
|
|---|
| 1273 | $ret->{parid} = (($def eq 'def' or $def eq 'y') ? $ret->{group_id} : $ret->{domain_id});
|
|---|
| 1274 |
|
|---|
| 1275 | return $ret;
|
|---|
| 1276 | }
|
|---|
| 1277 |
|
|---|
| 1278 |
|
|---|
| 1279 | ##fixme: should use above (getRecLine()) to get lines for below?
|
|---|
| 1280 | ## DNSDB::getDomRecs()
|
|---|
| 1281 | # Return records for a domain
|
|---|
| 1282 | # Takes a database handle, default/live flag, group/domain ID, start,
|
|---|
| 1283 | # number of records, sort field, and sort order
|
|---|
| 1284 | # Returns a reference to an array of hashes
|
|---|
| 1285 | sub getDomRecs {
|
|---|
| 1286 | $errstr = '';
|
|---|
| 1287 | my $dbh = shift;
|
|---|
| 1288 | my $type = shift;
|
|---|
| 1289 | my $id = shift;
|
|---|
| 1290 | my $nrecs = shift || 'all';
|
|---|
| 1291 | my $nstart = shift || 0;
|
|---|
| 1292 |
|
|---|
| 1293 | ## for order, need to map input to column names
|
|---|
| 1294 | my $order = shift || 'host';
|
|---|
| 1295 | my $direction = shift || 'ASC';
|
|---|
| 1296 |
|
|---|
| 1297 | my $filter = shift || '';
|
|---|
| 1298 |
|
|---|
| 1299 | $type = 'y' if $type eq 'def';
|
|---|
| 1300 |
|
|---|
| 1301 | my $sql = "SELECT r.record_id,r.host,r.type,r.val,r.distance,r.weight,r.port,r.ttl FROM ";
|
|---|
| 1302 | $sql .= "default_" if $type eq 'y';
|
|---|
| 1303 | $sql .= "records r ";
|
|---|
| 1304 | $sql .= "INNER JOIN rectypes t ON r.type=t.val "; # for sorting by type alphabetically
|
|---|
| 1305 | if ($type eq 'y') {
|
|---|
| 1306 | $sql .= "WHERE r.group_id=?";
|
|---|
| 1307 | } else {
|
|---|
| 1308 | $sql .= "WHERE r.domain_id=?";
|
|---|
| 1309 | }
|
|---|
| 1310 | $sql .= " AND NOT r.type=$reverse_typemap{SOA}";
|
|---|
| 1311 | $sql .= " AND host ~* ?" if $filter;
|
|---|
| 1312 | # use alphaorder column for "correct" ordering of sort-by-type instead of DNS RR type number
|
|---|
| 1313 | $sql .= " ORDER BY ".($order eq 'type' ? 't.alphaorder' : "r.$order")." $direction";
|
|---|
| 1314 | $sql .= " LIMIT $nrecs OFFSET ".($nstart*$nrecs) if $nstart ne 'all';
|
|---|
| 1315 |
|
|---|
| 1316 | my $sth = $dbh->prepare($sql) or warn $dbh->errstr;
|
|---|
| 1317 | $sth->execute($id) or warn "$sql: ".$sth->errstr;
|
|---|
| 1318 |
|
|---|
| 1319 | my @retbase;
|
|---|
| 1320 | while (my $ref = $sth->fetchrow_hashref()) {
|
|---|
| 1321 | push @retbase, $ref;
|
|---|
| 1322 | }
|
|---|
| 1323 |
|
|---|
| 1324 | my $ret = \@retbase;
|
|---|
| 1325 | return $ret;
|
|---|
| 1326 | } # end getDomRecs()
|
|---|
| 1327 |
|
|---|
| 1328 |
|
|---|
| 1329 | ## DNSDB::getRecCount()
|
|---|
| 1330 | # Return count of non-SOA records in domain (or default records in a group)
|
|---|
| 1331 | # Takes a database handle, default/live flag, group/domain ID, and optional filtering modifier
|
|---|
| 1332 | # Returns the count
|
|---|
| 1333 | sub getRecCount {
|
|---|
| 1334 | my $dbh = shift;
|
|---|
| 1335 | my $defrec = shift;
|
|---|
| 1336 | my $id = shift;
|
|---|
| 1337 | my $filter = shift || '';
|
|---|
| 1338 |
|
|---|
| 1339 | # keep the nasties down, since we can't ?-sub this bit. :/
|
|---|
| 1340 | # note this is chars allowed in DNS hostnames
|
|---|
| 1341 | $filter =~ s/[^a-zA-Z0-9_.:-]//g;
|
|---|
| 1342 |
|
|---|
| 1343 | my ($count) = $dbh->selectrow_array("SELECT count(*) FROM ".
|
|---|
| 1344 | ($defrec eq 'y' ? 'default_' : '')."records ".
|
|---|
| 1345 | "WHERE ".($defrec eq 'y' ? 'group' : 'domain')."_id=? ".
|
|---|
| 1346 | "AND NOT type=$reverse_typemap{SOA}".
|
|---|
| 1347 | ($filter ? " AND host ILIKE '%$filter%'" : ''),
|
|---|
| 1348 | undef, ($id) );
|
|---|
| 1349 |
|
|---|
| 1350 | return $count;
|
|---|
| 1351 |
|
|---|
| 1352 | } # end getRecCount()
|
|---|
| 1353 |
|
|---|
| 1354 |
|
|---|
| 1355 | ## DNSDB::addRec()
|
|---|
| 1356 | # Add a new record to a domain or a group's default records
|
|---|
| 1357 | # Takes a database handle, default/live flag, group/domain ID,
|
|---|
| 1358 | # host, type, value, and TTL
|
|---|
| 1359 | # Some types require additional detail: "distance" for MX and SRV,
|
|---|
| 1360 | # and weight/port for SRV
|
|---|
| 1361 | # Returns a status code and detail message in case of error
|
|---|
| 1362 | sub addRec {
|
|---|
| 1363 | $errstr = '';
|
|---|
| 1364 | my $dbh = shift;
|
|---|
| 1365 | my $defrec = shift;
|
|---|
| 1366 | my $id = shift;
|
|---|
| 1367 |
|
|---|
| 1368 | my $host = shift;
|
|---|
| 1369 | my $rectype = shift;
|
|---|
| 1370 | my $val = shift;
|
|---|
| 1371 | my $ttl = shift;
|
|---|
| 1372 |
|
|---|
| 1373 | # Validation
|
|---|
| 1374 | if ($rectype == $reverse_typemap{A}) {
|
|---|
| 1375 | return ("FAIL", "IPv4 addresses must be in the format n.n.n.n")
|
|---|
| 1376 | unless $val =~ /^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$/;
|
|---|
| 1377 | }
|
|---|
| 1378 | if ($rectype == $reverse_typemap{AAAA}) {
|
|---|
| 1379 | return ("FAIL", "IPv6 addresses must be in the format h:h:h::h")
|
|---|
| 1380 | unless $val =~ /^[a-fA-F0-9:]+$/
|
|---|
| 1381 | }
|
|---|
| 1382 | if ($rectype == $reverse_typemap{A} or $rectype == $reverse_typemap{AAAA}) {
|
|---|
| 1383 | my $tmpip = new NetAddr::IP $val or
|
|---|
| 1384 | return ("FAIL", "Address must be a valid IP address");
|
|---|
| 1385 | }
|
|---|
| 1386 |
|
|---|
| 1387 | return ('FAIL', "TTL must be numeric") unless $ttl =~ /^\d+$/;
|
|---|
| 1388 |
|
|---|
| 1389 | my $fields = ($defrec eq 'y' ? 'group_id' : 'domain_id').",host,type,val,ttl";
|
|---|
| 1390 | my $vallen = "?,?,?,?,?";
|
|---|
| 1391 | my @vallist = ($id,$host,$rectype,$val,$ttl);
|
|---|
| 1392 |
|
|---|
| 1393 | my $dist;
|
|---|
| 1394 | if ($rectype == $reverse_typemap{MX} or $rectype == $reverse_typemap{SRV}) {
|
|---|
| 1395 | $dist = shift;
|
|---|
| 1396 | return ('FAIL',"Distance is required for $typemap{$rectype} records") unless defined($dist);
|
|---|
| 1397 | $dist =~ s/\s*//g;
|
|---|
| 1398 | return ('FAIL',"Distance is required, and must be numeric") unless $dist =~ /^\d+$/;
|
|---|
| 1399 | $fields .= ",distance";
|
|---|
| 1400 | $vallen .= ",?";
|
|---|
| 1401 | push @vallist, $dist;
|
|---|
| 1402 | }
|
|---|
| 1403 | my $weight;
|
|---|
| 1404 | my $port;
|
|---|
| 1405 | if ($rectype == $reverse_typemap{SRV}) {
|
|---|
| 1406 | # check for _service._protocol. NB: RFC2782 does not say "MUST"... nor "SHOULD"...
|
|---|
| 1407 | # it just says (paraphrased) "... is prepended with _ to prevent DNS collisions"
|
|---|
| 1408 | return ('FAIL',"SRV records must begin with _service._protocol [$host]")
|
|---|
| 1409 | unless $host =~ /^_[A-Za-z]+\._[A-Za-z]+\.[a-zA-Z0-9-]+/;
|
|---|
| 1410 | $weight = shift;
|
|---|
| 1411 | $port = shift;
|
|---|
| 1412 | return ('FAIL',"Port and weight are required for SRV records") unless defined($weight) && defined($port);
|
|---|
| 1413 | $weight =~ s/\s*//g;
|
|---|
| 1414 | $port =~ s/\s*//g;
|
|---|
| 1415 | return ('FAIL',"Port and weight are required, and must be numeric")
|
|---|
| 1416 | unless $weight =~ /^\d+$/ && $port =~ /^\d+$/;
|
|---|
| 1417 | $fields .= ",weight,port";
|
|---|
| 1418 | $vallen .= ",?,?";
|
|---|
| 1419 | push @vallist, ($weight,$port);
|
|---|
| 1420 | }
|
|---|
| 1421 |
|
|---|
| 1422 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 1423 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 1424 | local $dbh->{AutoCommit} = 0;
|
|---|
| 1425 | local $dbh->{RaiseError} = 1;
|
|---|
| 1426 |
|
|---|
| 1427 | eval {
|
|---|
| 1428 | $dbh->do("INSERT INTO ".($defrec eq 'y' ? 'default_' : '')."records ($fields) VALUES ($vallen)",
|
|---|
| 1429 | undef, @vallist);
|
|---|
| 1430 | $dbh->commit;
|
|---|
| 1431 | };
|
|---|
| 1432 | if ($@) {
|
|---|
| 1433 | my $msg = $@;
|
|---|
| 1434 | eval { $dbh->rollback; };
|
|---|
| 1435 | return ('FAIL',$msg);
|
|---|
| 1436 | }
|
|---|
| 1437 |
|
|---|
| 1438 | return ('OK','OK');
|
|---|
| 1439 |
|
|---|
| 1440 | } # end addRec()
|
|---|
| 1441 |
|
|---|
| 1442 |
|
|---|
| 1443 | ## DNSDB::updateRec()
|
|---|
| 1444 | # Update a record
|
|---|
| 1445 | sub updateRec {
|
|---|
| 1446 | $errstr = '';
|
|---|
| 1447 |
|
|---|
| 1448 | my $dbh = shift;
|
|---|
| 1449 | my $defrec = shift;
|
|---|
| 1450 | my $id = shift;
|
|---|
| 1451 |
|
|---|
| 1452 | # all records have these
|
|---|
| 1453 | my $host = shift;
|
|---|
| 1454 | my $type = shift;
|
|---|
| 1455 | my $val = shift;
|
|---|
| 1456 | my $ttl = shift;
|
|---|
| 1457 |
|
|---|
| 1458 | return('FAIL',"Missing standard argument(s)") if !defined($ttl);
|
|---|
| 1459 |
|
|---|
| 1460 | # only MX and SRV will use these
|
|---|
| 1461 | my $dist = 0;
|
|---|
| 1462 | my $weight = 0;
|
|---|
| 1463 | my $port = 0;
|
|---|
| 1464 |
|
|---|
| 1465 | if ($type == $reverse_typemap{MX} || $type == $reverse_typemap{SRV}) {
|
|---|
| 1466 | $dist = shift;
|
|---|
| 1467 | return ('FAIL',"MX or SRV requires distance") if !defined($dist);
|
|---|
| 1468 | if ($type == $reverse_typemap{SRV}) {
|
|---|
| 1469 | $weight = shift;
|
|---|
| 1470 | return ('FAIL',"SRV requires weight") if !defined($weight);
|
|---|
| 1471 | $port = shift;
|
|---|
| 1472 | return ('FAIL',"SRV requires port") if !defined($port);
|
|---|
| 1473 | }
|
|---|
| 1474 | }
|
|---|
| 1475 |
|
|---|
| 1476 | local $dbh->{AutoCommit} = 0;
|
|---|
| 1477 | local $dbh->{RaiseError} = 1;
|
|---|
| 1478 |
|
|---|
| 1479 | eval {
|
|---|
| 1480 | $dbh->do("UPDATE ".($defrec eq 'y' ? 'default_' : '')."records ".
|
|---|
| 1481 | "SET host=?,val=?,type=?,ttl=?,distance=?,weight=?,port=? ".
|
|---|
| 1482 | "WHERE record_id=?", undef, ($host, $val, $type, $ttl, $dist, $weight, $port, $id) );
|
|---|
| 1483 | $dbh->commit;
|
|---|
| 1484 | };
|
|---|
| 1485 | if ($@) {
|
|---|
| 1486 | my $msg = $@;
|
|---|
| 1487 | $dbh->rollback;
|
|---|
| 1488 | return ('FAIL', $msg);
|
|---|
| 1489 | }
|
|---|
| 1490 |
|
|---|
| 1491 | return ('OK','OK');
|
|---|
| 1492 | } # end updateRec()
|
|---|
| 1493 |
|
|---|
| 1494 |
|
|---|
| 1495 | ## DNSDB::delRec()
|
|---|
| 1496 | # Delete a record.
|
|---|
| 1497 | sub delRec {
|
|---|
| 1498 | $errstr = '';
|
|---|
| 1499 | my $dbh = shift;
|
|---|
| 1500 | my $defrec = shift;
|
|---|
| 1501 | my $id = shift;
|
|---|
| 1502 |
|
|---|
| 1503 | my $sth = $dbh->prepare("DELETE FROM ".($defrec eq 'y' ? 'default_' : '')."records WHERE record_id=?");
|
|---|
| 1504 | $sth->execute($id);
|
|---|
| 1505 |
|
|---|
| 1506 | return ('FAIL',"Couldn't remove record: ".$sth->errstr) if $sth->err;
|
|---|
| 1507 |
|
|---|
| 1508 | return ('OK','OK');
|
|---|
| 1509 | } # end delRec()
|
|---|
| 1510 |
|
|---|
| 1511 |
|
|---|
| 1512 | # Reference hashes.
|
|---|
| 1513 | my %par_tbl = (
|
|---|
| 1514 | group => 'groups',
|
|---|
| 1515 | user => 'users',
|
|---|
| 1516 | defrec => 'default_records',
|
|---|
| 1517 | domain => 'domains',
|
|---|
| 1518 | record => 'records'
|
|---|
| 1519 | );
|
|---|
| 1520 | my %id_col = (
|
|---|
| 1521 | group => 'group_id',
|
|---|
| 1522 | user => 'user_id',
|
|---|
| 1523 | defrec => 'record_id',
|
|---|
| 1524 | domain => 'domain_id',
|
|---|
| 1525 | record => 'record_id'
|
|---|
| 1526 | );
|
|---|
| 1527 | my %par_col = (
|
|---|
| 1528 | group => 'parent_group_id',
|
|---|
| 1529 | user => 'group_id',
|
|---|
| 1530 | defrec => 'group_id',
|
|---|
| 1531 | domain => 'group_id',
|
|---|
| 1532 | record => 'domain_id'
|
|---|
| 1533 | );
|
|---|
| 1534 | my %par_type = (
|
|---|
| 1535 | group => 'group',
|
|---|
| 1536 | user => 'group',
|
|---|
| 1537 | defrec => 'group',
|
|---|
| 1538 | domain => 'group',
|
|---|
| 1539 | record => 'domain'
|
|---|
| 1540 | );
|
|---|
| 1541 |
|
|---|
| 1542 | ## DNSDB::getParents()
|
|---|
| 1543 | # Find out which entities are parent to the requested id
|
|---|
| 1544 | # Returns arrayref containing hash pairs of id/type
|
|---|
| 1545 | sub getParents {
|
|---|
| 1546 | my $dbh = shift;
|
|---|
| 1547 | my $id = shift;
|
|---|
| 1548 | my $type = shift;
|
|---|
| 1549 | my $depth = shift || 'all'; # valid values: 'all', 'immed', <int> (stop at this group ID)
|
|---|
| 1550 |
|
|---|
| 1551 | my @parlist;
|
|---|
| 1552 |
|
|---|
| 1553 | while (1) {
|
|---|
| 1554 | my $result = $dbh->selectrow_hashref("SELECT $par_col{$type} FROM $par_tbl{$type} WHERE $id_col{$type} = ?",
|
|---|
| 1555 | undef, ($id) );
|
|---|
| 1556 | my %tmp = ($result->{$par_col{$type}} => $par_type{$type});
|
|---|
| 1557 | unshift @parlist, \%tmp;
|
|---|
| 1558 | last if $result->{$par_col{$type}} == 1; # group 1 is its own parent
|
|---|
| 1559 | $id = $result->{$par_col{$type}};
|
|---|
| 1560 | $type = $par_type{$type};
|
|---|
| 1561 | }
|
|---|
| 1562 |
|
|---|
| 1563 | return \@parlist;
|
|---|
| 1564 |
|
|---|
| 1565 | } # end getParents()
|
|---|
| 1566 |
|
|---|
| 1567 |
|
|---|
| 1568 | ## DNSDB::isParent()
|
|---|
| 1569 | # Returns true if $id1 is a parent of $id2, false otherwise
|
|---|
| 1570 | sub isParent {
|
|---|
| 1571 | my $dbh = shift;
|
|---|
| 1572 | my $id1 = shift;
|
|---|
| 1573 | my $type1 = shift;
|
|---|
| 1574 | my $id2 = shift;
|
|---|
| 1575 | my $type2 = shift;
|
|---|
| 1576 | ##todo: immediate, secondary, full (default)
|
|---|
| 1577 |
|
|---|
| 1578 | # Return false on invalid types
|
|---|
| 1579 | return 0 if !grep /^$type1$/, ('record','defrec','user','domain','group');
|
|---|
| 1580 | return 0 if !grep /^$type2$/, ('record','defrec','user','domain','group');
|
|---|
| 1581 |
|
|---|
| 1582 | # Return false on impossible relations
|
|---|
| 1583 | return 0 if $type1 eq 'record'; # nothing may be a child of a record
|
|---|
| 1584 | return 0 if $type1 eq 'defrec'; # nothing may be a child of a record
|
|---|
| 1585 | return 0 if $type1 eq 'user'; # nothing may be child of a user
|
|---|
| 1586 | return 0 if $type1 eq 'domain' && $type2 ne 'record'; # domain may not be a parent of anything other than a record
|
|---|
| 1587 |
|
|---|
| 1588 | # ennnhhhh.... if we're passed an id of 0, it will never be found. usual
|
|---|
| 1589 | # case would be the UI creating a new <thing>, and so we don't have an ID for
|
|---|
| 1590 | # <thing> to look up yet. in that case the UI should check the parent as well.
|
|---|
| 1591 | # argument for returning 1 is
|
|---|
| 1592 | return 0 if $id1 == 0; # nothing can have a parent id of 0
|
|---|
| 1593 | return 1 if $id2 == 0; # anything could have a child id of 0 (or "unknown")
|
|---|
| 1594 |
|
|---|
| 1595 | # group 1 is the ultimate root parent
|
|---|
| 1596 | return 1 if $type1 eq 'group' && $id1 == 1;
|
|---|
| 1597 |
|
|---|
| 1598 | # groups are always (a) parent of themselves
|
|---|
| 1599 | return 1 if $type1 eq 'group' && $type2 eq 'group' && $id1 == $id2;
|
|---|
| 1600 |
|
|---|
| 1601 | # almost the same loop as getParents() above
|
|---|
| 1602 | my $id = $id2;
|
|---|
| 1603 | my $type = $type2;
|
|---|
| 1604 | my $foundparent = 0;
|
|---|
| 1605 |
|
|---|
| 1606 | my $limiter = 0;
|
|---|
| 1607 | while (1) {
|
|---|
| 1608 | my $sql = "SELECT $par_col{$type} FROM $par_tbl{$type} WHERE $id_col{$type} = ?";
|
|---|
| 1609 | my $result = $dbh->selectrow_hashref($sql,
|
|---|
| 1610 | undef, ($id) );
|
|---|
| 1611 | if (!$result) {
|
|---|
| 1612 | $limiter++;
|
|---|
| 1613 | ##fixme: how often will this happen on a live site?
|
|---|
| 1614 | warn "no results looking for $sql with id $id (depth $limiter)\n";
|
|---|
| 1615 | last;
|
|---|
| 1616 | }
|
|---|
| 1617 | if ($result && $result->{$par_col{$type}} == $id1) {
|
|---|
| 1618 | $foundparent = 1;
|
|---|
| 1619 | last;
|
|---|
| 1620 | } else {
|
|---|
| 1621 | ##fixme: do we care about trying to return a "no such record/domain/user/group" error?
|
|---|
| 1622 | warn $dbh->errstr." $sql, $id" if $dbh->errstr;
|
|---|
| 1623 | }
|
|---|
| 1624 | # group 1 is its own parent. need this here more to break strange loops than for detecting a parent
|
|---|
| 1625 | last if $result->{$par_col{$type}} == 1;
|
|---|
| 1626 | $id = $result->{$par_col{$type}};
|
|---|
| 1627 | $type = $par_type{$type};
|
|---|
| 1628 | }
|
|---|
| 1629 |
|
|---|
| 1630 | return $foundparent;
|
|---|
| 1631 | } # end isParent()
|
|---|
| 1632 |
|
|---|
| 1633 |
|
|---|
| 1634 | ## DNSDB::domStatus()
|
|---|
| 1635 | # Sets and/or returns a domain's status
|
|---|
| 1636 | # Takes a database handle, domain ID and optionally a status argument
|
|---|
| 1637 | # Returns undef on errors.
|
|---|
| 1638 | sub domStatus {
|
|---|
| 1639 | my $dbh = shift;
|
|---|
| 1640 | my $id = shift;
|
|---|
| 1641 | my $newstatus = shift;
|
|---|
| 1642 |
|
|---|
| 1643 | return undef if $id !~ /^\d+$/;
|
|---|
| 1644 |
|
|---|
| 1645 | my $sth;
|
|---|
| 1646 |
|
|---|
| 1647 | # ooo, fun! let's see what we were passed for status
|
|---|
| 1648 | if ($newstatus) {
|
|---|
| 1649 | $sth = $dbh->prepare("update domains set status=? where domain_id=?");
|
|---|
| 1650 | # ass-u-me caller knows what's going on in full
|
|---|
| 1651 | if ($newstatus =~ /^[01]$/) { # only two valid for now.
|
|---|
| 1652 | $sth->execute($newstatus,$id);
|
|---|
| 1653 | } elsif ($newstatus =~ /^domo(?:n|ff)$/) {
|
|---|
| 1654 | $sth->execute(($newstatus eq 'domon' ? 1 : 0),$id);
|
|---|
| 1655 | }
|
|---|
| 1656 | }
|
|---|
| 1657 |
|
|---|
| 1658 | $sth = $dbh->prepare("select status from domains where domain_id=?");
|
|---|
| 1659 | $sth->execute($id);
|
|---|
| 1660 | my ($status) = $sth->fetchrow_array;
|
|---|
| 1661 | return $status;
|
|---|
| 1662 | } # end domStatus()
|
|---|
| 1663 |
|
|---|
| 1664 |
|
|---|
| 1665 | ## DNSDB::importAXFR
|
|---|
| 1666 | # Import a domain via AXFR
|
|---|
| 1667 | # Takes AXFR host, domain to transfer, group to put the domain in,
|
|---|
| 1668 | # and optionally:
|
|---|
| 1669 | # - active/inactive state flag (defaults to active)
|
|---|
| 1670 | # - overwrite-SOA flag (defaults to off)
|
|---|
| 1671 | # - overwrite-NS flag (defaults to off, doesn't affect subdomain NS records)
|
|---|
| 1672 | # Returns a status code (OK, WARN, or FAIL) and message - message should be blank
|
|---|
| 1673 | # if status is OK, but WARN includes conditions that are not fatal but should
|
|---|
| 1674 | # really be reported.
|
|---|
| 1675 | sub importAXFR {
|
|---|
| 1676 | my $dbh = shift;
|
|---|
| 1677 | my $ifrom_in = shift;
|
|---|
| 1678 | my $domain = shift;
|
|---|
| 1679 | my $group = shift;
|
|---|
| 1680 | my $status = shift || 1;
|
|---|
| 1681 | my $rwsoa = shift || 0;
|
|---|
| 1682 | my $rwns = shift || 0;
|
|---|
| 1683 |
|
|---|
| 1684 | ##fixme: add mode to delete&replace, merge+overwrite, merge new?
|
|---|
| 1685 |
|
|---|
| 1686 | my $nrecs = 0;
|
|---|
| 1687 | my $soaflag = 0;
|
|---|
| 1688 | my $nsflag = 0;
|
|---|
| 1689 | my $warnmsg = '';
|
|---|
| 1690 | my $ifrom;
|
|---|
| 1691 |
|
|---|
| 1692 | # choke on possible bad setting in ifrom
|
|---|
| 1693 | # IPv4 and v6, and valid hostnames!
|
|---|
| 1694 | ($ifrom) = ($ifrom_in =~ /^([0-9a-f\:.]+|[0-9a-z_.-]+)$/i);
|
|---|
| 1695 | return ('FAIL', "Bad AXFR source host $ifrom")
|
|---|
| 1696 | unless ($ifrom) = ($ifrom_in =~ /^([0-9a-f\:.]+|[0-9a-z_.-]+)$/i);
|
|---|
| 1697 |
|
|---|
| 1698 | # Allow transactions, and raise an exception on errors so we can catch it later.
|
|---|
| 1699 | # Use local to make sure these get "reset" properly on exiting this block
|
|---|
| 1700 | local $dbh->{AutoCommit} = 0;
|
|---|
| 1701 | local $dbh->{RaiseError} = 1;
|
|---|
| 1702 |
|
|---|
| 1703 | my $sth = $dbh->prepare("SELECT domain_id FROM domains WHERE domain=?");
|
|---|
| 1704 | my $dom_id;
|
|---|
| 1705 |
|
|---|
| 1706 | # quick check to start to see if we've already got one
|
|---|
| 1707 | $sth->execute($domain);
|
|---|
| 1708 | ($dom_id) = $sth->fetchrow_array;
|
|---|
| 1709 |
|
|---|
| 1710 | return ('FAIL', "Domain already exists") if $dom_id;
|
|---|
| 1711 |
|
|---|
| 1712 | eval {
|
|---|
| 1713 | # can't do this, can't nest transactions. sigh.
|
|---|
| 1714 | #my ($dcode, $dmsg) = addDomain(dbh, domain, group, status);
|
|---|
| 1715 |
|
|---|
| 1716 | ##fixme: serial
|
|---|
| 1717 | my $sth = $dbh->prepare("INSERT INTO domains (domain,group_id,status) VALUES (?,?,?)");
|
|---|
| 1718 | $sth->execute($domain,$group,$status);
|
|---|
| 1719 |
|
|---|
| 1720 | ## bizarre DBI<->Net::DNS interaction bug:
|
|---|
| 1721 | ## sometimes a zone will cause an immediate commit-and-exit (sort of) of the while()
|
|---|
| 1722 | ## fixed, apparently I was doing *something* odd, but not certain what it was that
|
|---|
| 1723 | ## caused a commit instead of barfing
|
|---|
| 1724 |
|
|---|
| 1725 | # get domain id so we can do the records
|
|---|
| 1726 | $sth = $dbh->prepare("SELECT domain_id FROM domains WHERE domain=?");
|
|---|
| 1727 | $sth->execute($domain);
|
|---|
| 1728 | ($dom_id) = $sth->fetchrow_array();
|
|---|
| 1729 |
|
|---|
| 1730 | my $res = Net::DNS::Resolver->new;
|
|---|
| 1731 | $res->nameservers($ifrom);
|
|---|
| 1732 | $res->axfr_start($domain)
|
|---|
| 1733 | or die "Couldn't begin AXFR\n";
|
|---|
| 1734 |
|
|---|
| 1735 | while (my $rr = $res->axfr_next()) {
|
|---|
| 1736 | my $type = $rr->type;
|
|---|
| 1737 |
|
|---|
| 1738 | my $sql = "INSERT INTO records (domain_id,host,type,ttl,val";
|
|---|
| 1739 | my $vallen = "?,?,?,?,?";
|
|---|
| 1740 |
|
|---|
| 1741 | $soaflag = 1 if $type eq 'SOA';
|
|---|
| 1742 | $nsflag = 1 if $type eq 'NS';
|
|---|
| 1743 |
|
|---|
| 1744 | my @vallist = ($dom_id, $rr->name, $reverse_typemap{$type}, $rr->ttl);
|
|---|
| 1745 |
|
|---|
| 1746 | # "Primary" types:
|
|---|
| 1747 | # A, NS, CNAME, SOA, PTR(warn in forward), MX, TXT, AAAA, SRV, A6(ob), SPF
|
|---|
| 1748 | # maybe KEY
|
|---|
| 1749 |
|
|---|
| 1750 | # nasty big ugly case-like thing here, since we have to do *some* different
|
|---|
| 1751 | # processing depending on the record. le sigh.
|
|---|
| 1752 |
|
|---|
| 1753 | ##fixme: what record types other than TXT can/will have >255-byte payloads?
|
|---|
| 1754 |
|
|---|
| 1755 | if ($type eq 'A') {
|
|---|
| 1756 | push @vallist, $rr->address;
|
|---|
| 1757 | } elsif ($type eq 'NS') {
|
|---|
| 1758 | # hmm. should we warn here if subdomain NS'es are left alone?
|
|---|
| 1759 | next if ($rwns && ($rr->name eq $domain));
|
|---|
| 1760 | push @vallist, $rr->nsdname;
|
|---|
| 1761 | $nsflag = 1;
|
|---|
| 1762 | } elsif ($type eq 'CNAME') {
|
|---|
| 1763 | push @vallist, $rr->cname;
|
|---|
| 1764 | } elsif ($type eq 'SOA') {
|
|---|
| 1765 | next if $rwsoa;
|
|---|
| 1766 | $vallist[1] = $rr->mname.":".$rr->rname;
|
|---|
| 1767 | push @vallist, ($rr->refresh.":".$rr->retry.":".$rr->expire.":".$rr->minimum);
|
|---|
| 1768 | $soaflag = 1;
|
|---|
| 1769 | } elsif ($type eq 'PTR') {
|
|---|
| 1770 | push @vallist, $rr->ptrdname;
|
|---|
| 1771 | # hmm. PTR records should not be in forward zones.
|
|---|
| 1772 | } elsif ($type eq 'MX') {
|
|---|
| 1773 | $sql .= ",distance";
|
|---|
| 1774 | $vallen .= ",?";
|
|---|
| 1775 | push @vallist, $rr->exchange;
|
|---|
| 1776 | push @vallist, $rr->preference;
|
|---|
| 1777 | } elsif ($type eq 'TXT') {
|
|---|
| 1778 | ##fixme: Net::DNS docs say this should be deprecated for rdatastr() or char_str_list(),
|
|---|
| 1779 | ## but don't really seem enthusiastic about it.
|
|---|
| 1780 | my $rrdata = $rr->txtdata;
|
|---|
| 1781 | push @vallist, $rrdata;
|
|---|
| 1782 | } elsif ($type eq 'SPF') {
|
|---|
| 1783 | ##fixme: and the same caveat here, since it is apparently a clone of ::TXT
|
|---|
| 1784 | my $rrdata = $rr->txtdata;
|
|---|
| 1785 | push @vallist, $rrdata;
|
|---|
| 1786 | } elsif ($type eq 'AAAA') {
|
|---|
| 1787 | push @vallist, $rr->address;
|
|---|
| 1788 | } elsif ($type eq 'SRV') {
|
|---|
| 1789 | $sql .= ",distance,weight,port" if $type eq 'SRV';
|
|---|
| 1790 | $vallen .= ",?,?,?" if $type eq 'SRV';
|
|---|
| 1791 | push @vallist, $rr->target;
|
|---|
| 1792 | push @vallist, $rr->priority;
|
|---|
| 1793 | push @vallist, $rr->weight;
|
|---|
| 1794 | push @vallist, $rr->port;
|
|---|
| 1795 | } elsif ($type eq 'KEY') {
|
|---|
| 1796 | # we don't actually know what to do with these...
|
|---|
| 1797 | push @vallist, ($rr->flags.":".$rr->protocol.":".$rr->algorithm.":".$rr->key.":".$rr->keytag.":".$rr->privatekeyname);
|
|---|
| 1798 | } else {
|
|---|
| 1799 | my $rrdata = $rr->rdatastr;
|
|---|
| 1800 | push @vallist, $rrdata;
|
|---|
| 1801 | # Finding a different record type is not fatal.... just problematic.
|
|---|
| 1802 | # We may not be able to export it correctly.
|
|---|
| 1803 | $warnmsg .= "Unusual record ".$rr->name." ($type) found\n";
|
|---|
| 1804 | }
|
|---|
| 1805 |
|
|---|
| 1806 | # BIND supports:
|
|---|
| 1807 | # A CNAME HINFO MB(ex) MD(ob) MF(ob) MG(ex) MINFO(ex) MR(ex) MX NS NULL
|
|---|
| 1808 | # PTR SOA TXT WKS AFSDB(ex) ISDN(ex) RP(ex) RT(ex) X25(ex) PX
|
|---|
| 1809 | # ... if one can ever find the right magic to format them correctly
|
|---|
| 1810 |
|
|---|
| 1811 | # Net::DNS supports:
|
|---|
| 1812 | # RRSIG SIG NSAP NS NIMLOC NAPTR MX MR MINFO MG MB LOC ISDN IPSECKEY HINFO
|
|---|
| 1813 | # EID DNAME CNAME CERT APL AFSDB AAAA A DS NXT NSEC3PARAM NSEC3 NSEC KEY
|
|---|
| 1814 | # DNSKEY DLV X25 TXT TSIG TKEY SSHFP SRV SPF SOA RT RP PX PTR NULL APL::AplItem
|
|---|
| 1815 |
|
|---|
| 1816 | $sth = $dbh->prepare($sql.") VALUES (".$vallen.")") or die "problem preparing record insert SQL\n";
|
|---|
| 1817 | $sth->execute(@vallist) or die "failed to insert ".$rr->string.": ".$sth->errstr."\n";
|
|---|
| 1818 |
|
|---|
| 1819 | $nrecs++;
|
|---|
| 1820 |
|
|---|
| 1821 | } # while axfr_next
|
|---|
| 1822 |
|
|---|
| 1823 | # Overwrite SOA record
|
|---|
| 1824 | if ($rwsoa) {
|
|---|
| 1825 | $soaflag = 1;
|
|---|
| 1826 | my $sthgetsoa = $dbh->prepare("SELECT host,val,ttl FROM default_records WHERE group_id=? AND type=?");
|
|---|
| 1827 | my $sthputsoa = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,ttl) VALUES (?,?,?,?,?)");
|
|---|
| 1828 | $sthgetsoa->execute($group,$reverse_typemap{SOA});
|
|---|
| 1829 | while (my ($host,$val,$ttl) = $sthgetsoa->fetchrow_array()) {
|
|---|
| 1830 | $host =~ s/DOMAIN/$domain/g;
|
|---|
| 1831 | $val =~ s/DOMAIN/$domain/g;
|
|---|
| 1832 | $sthputsoa->execute($dom_id,$host,$reverse_typemap{SOA},$val,$ttl);
|
|---|
| 1833 | }
|
|---|
| 1834 | }
|
|---|
| 1835 |
|
|---|
| 1836 | # Overwrite NS records
|
|---|
| 1837 | if ($rwns) {
|
|---|
| 1838 | $nsflag = 1;
|
|---|
| 1839 | my $sthgetns = $dbh->prepare("SELECT host,val,ttl FROM default_records WHERE group_id=? AND type=?");
|
|---|
| 1840 | my $sthputns = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,ttl) VALUES (?,?,?,?,?)");
|
|---|
| 1841 | $sthgetns->execute($group,$reverse_typemap{NS});
|
|---|
| 1842 | while (my ($host,$val,$ttl) = $sthgetns->fetchrow_array()) {
|
|---|
| 1843 | $host =~ s/DOMAIN/$domain/g;
|
|---|
| 1844 | $val =~ s/DOMAIN/$domain/g;
|
|---|
| 1845 | $sthputns->execute($dom_id,$host,$reverse_typemap{NS},$val,$ttl);
|
|---|
| 1846 | }
|
|---|
| 1847 | }
|
|---|
| 1848 |
|
|---|
| 1849 | die "No records found; either $ifrom is not authoritative or doesn't allow transfers\n" if !$nrecs;
|
|---|
| 1850 | die "Bad zone: No SOA record!\n" if !$soaflag;
|
|---|
| 1851 | die "Bad zone: No NS records!\n" if !$nsflag;
|
|---|
| 1852 |
|
|---|
| 1853 | $dbh->commit;
|
|---|
| 1854 |
|
|---|
| 1855 | };
|
|---|
| 1856 |
|
|---|
| 1857 | if ($@) {
|
|---|
| 1858 | my $msg = $@;
|
|---|
| 1859 | eval { $dbh->rollback; };
|
|---|
| 1860 | return ('FAIL',$msg." $warnmsg");
|
|---|
| 1861 | } else {
|
|---|
| 1862 | return ('WARN', $warnmsg) if $warnmsg;
|
|---|
| 1863 | return ('OK',"Imported OK");
|
|---|
| 1864 | }
|
|---|
| 1865 |
|
|---|
| 1866 | # it should be impossible to get here.
|
|---|
| 1867 | return ('WARN',"OOOK!");
|
|---|
| 1868 | } # end importAXFR()
|
|---|
| 1869 |
|
|---|
| 1870 |
|
|---|
| 1871 | ## DNSDB::export()
|
|---|
| 1872 | # Export the DNS database, or a part of it
|
|---|
| 1873 | # Takes database handle, export type, optional arguments depending on type
|
|---|
| 1874 | # Writes zone data to targets as appropriate for type
|
|---|
| 1875 | sub export {
|
|---|
| 1876 | my $dbh = shift;
|
|---|
| 1877 | my $target = shift;
|
|---|
| 1878 |
|
|---|
| 1879 | if ($target eq 'tiny') {
|
|---|
| 1880 | __export_tiny($dbh,@_);
|
|---|
| 1881 | }
|
|---|
| 1882 | # elsif ($target eq 'foo') {
|
|---|
| 1883 | # __export_foo($dbh,@_);
|
|---|
| 1884 | #}
|
|---|
| 1885 | # etc
|
|---|
| 1886 |
|
|---|
| 1887 | } # end export()
|
|---|
| 1888 |
|
|---|
| 1889 |
|
|---|
| 1890 | ## DNSDB::__export_tiny
|
|---|
| 1891 | # Internal sub to implement tinyDNS (compatible) export
|
|---|
| 1892 | # Takes database handle, filehandle to write export to, optional argument(s)
|
|---|
| 1893 | # to determine which data gets exported
|
|---|
| 1894 | sub __export_tiny {
|
|---|
| 1895 | my $dbh = shift;
|
|---|
| 1896 | my $datafile = shift;
|
|---|
| 1897 |
|
|---|
| 1898 | ##fixme: slurp up further options to specify particular zone(s) to export
|
|---|
| 1899 |
|
|---|
| 1900 | ## Convert a bare number into an octal-coded pair of octets.
|
|---|
| 1901 | # Take optional arg to indicate a decimal or hex input. Defaults to hex.
|
|---|
| 1902 | sub octalize {
|
|---|
| 1903 | my $tmp = shift;
|
|---|
| 1904 | my $srctype = shift || 'h'; # default assumes hex string
|
|---|
| 1905 | $tmp = sprintf "%0.4x", hex($tmp) if $srctype eq 'h'; # 0-pad hex to 4 digits
|
|---|
| 1906 | $tmp = sprintf "%0.4x", $tmp if $srctype eq 'd'; # 0-pad decimal to 4 hex digits
|
|---|
| 1907 | my @o = ($tmp =~ /^(..)(..)$/); # split into octets
|
|---|
| 1908 | return sprintf "\\%0.3o\\%0.3o", hex($o[0]), hex($o[1]);;
|
|---|
| 1909 | }
|
|---|
| 1910 |
|
|---|
| 1911 | ##fixme: fail if $datafile isn't an open, writable file
|
|---|
| 1912 |
|
|---|
| 1913 | # easy case - export all evarything
|
|---|
| 1914 | # not-so-easy case - export item(s) specified
|
|---|
| 1915 | # todo: figure out what kind of list we use to export items
|
|---|
| 1916 |
|
|---|
| 1917 | my $domsth = $dbh->prepare("SELECT domain_id,domain,status FROM domains WHERE status=1");
|
|---|
| 1918 | my $recsth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl ".
|
|---|
| 1919 | "FROM records WHERE domain_id=?");
|
|---|
| 1920 | $domsth->execute();
|
|---|
| 1921 | while (my ($domid,$dom,$domstat) = $domsth->fetchrow_array) {
|
|---|
| 1922 | $recsth->execute($domid);
|
|---|
| 1923 | while (my ($host,$type,$val,$dist,$weight,$port,$ttl) = $recsth->fetchrow_array) {
|
|---|
| 1924 | ##fixme: need to store location in the db, and retrieve it here.
|
|---|
| 1925 | # temporarily hardcoded to empty so we can include it further down.
|
|---|
| 1926 | my $loc = '';
|
|---|
| 1927 |
|
|---|
| 1928 | ##fixme: record validity timestamp. tinydns supports fiddling with timestamps.
|
|---|
| 1929 | # note $ttl must be set to 0 if we want to use tinydns's auto-expiring timestamps.
|
|---|
| 1930 | # timestamps are TAI64
|
|---|
| 1931 | # ~~ 2^62 + time()
|
|---|
| 1932 | my $stamp = '';
|
|---|
| 1933 |
|
|---|
| 1934 | # raw packet in unknown format: first byte indicates length
|
|---|
| 1935 | # of remaining data, allows up to 255 raw bytes
|
|---|
| 1936 |
|
|---|
| 1937 | ##fixme? append . to all host/val hostnames
|
|---|
| 1938 | if ($typemap{$type} eq 'SOA') {
|
|---|
| 1939 |
|
|---|
| 1940 | # host contains pri-ns:responsible
|
|---|
| 1941 | # val is abused to contain refresh:retry:expire:minttl
|
|---|
| 1942 | ##fixme: "manual" serial vs tinydns-autoserial
|
|---|
| 1943 | # let's be explicit about abusing $host and $val
|
|---|
| 1944 | my ($email, $primary) = (split /:/, $host)[0,1];
|
|---|
| 1945 | my ($refresh, $retry, $expire, $min_ttl) = (split /:/, $val)[0,1,2,3];
|
|---|
| 1946 | print $datafile "Z$dom:$primary:$email"."::$refresh:$retry:$expire:$min_ttl:$ttl:$stamp:$loc\n";
|
|---|
| 1947 |
|
|---|
| 1948 | } elsif ($typemap{$type} eq 'A') {
|
|---|
| 1949 |
|
|---|
| 1950 | print $datafile "+$host:$val:$ttl:$stamp:$loc\n";
|
|---|
| 1951 |
|
|---|
| 1952 | } elsif ($typemap{$type} eq 'NS') {
|
|---|
| 1953 |
|
|---|
| 1954 | print $datafile "\&$host"."::$val:$ttl:$stamp:$loc\n";
|
|---|
| 1955 |
|
|---|
| 1956 | } elsif ($typemap{$type} eq 'AAAA') {
|
|---|
| 1957 |
|
|---|
| 1958 | print $datafile ":$host:28:";
|
|---|
| 1959 | my $altgrp = 0;
|
|---|
| 1960 | my @altconv;
|
|---|
| 1961 | # Split in to up to 8 groups of hex digits (allows for IPv6 :: 0-collapsing)
|
|---|
| 1962 | foreach (split /:/, $val) {
|
|---|
| 1963 | if (/^$/) {
|
|---|
| 1964 | # flag blank entry; this is a series of 0's of (currently) unknown length
|
|---|
| 1965 | $altconv[$altgrp++] = 's';
|
|---|
| 1966 | } else {
|
|---|
| 1967 | # call sub to convert 1-4 hex digits to 2 string-rep octal bytes
|
|---|
| 1968 | $altconv[$altgrp++] = octalize($_)
|
|---|
| 1969 | }
|
|---|
| 1970 | }
|
|---|
| 1971 | foreach my $octet (@altconv) {
|
|---|
| 1972 | # if not 's', output
|
|---|
| 1973 | print $datafile $octet unless $octet =~ /^s$/;
|
|---|
| 1974 | # if 's', output (9-array length)x literal '\000\000'
|
|---|
| 1975 | print $datafile '\000\000'x(9-$altgrp) if $octet =~ /^s$/;
|
|---|
| 1976 | }
|
|---|
| 1977 | print $datafile ":$ttl:$stamp:$loc\n";
|
|---|
| 1978 |
|
|---|
| 1979 | } elsif ($typemap{$type} eq 'MX') {
|
|---|
| 1980 |
|
|---|
| 1981 | print $datafile "\@$host"."::$val:$dist:$ttl:$stamp:$loc\n";
|
|---|
| 1982 |
|
|---|
| 1983 | } elsif ($typemap{$type} eq 'TXT') {
|
|---|
| 1984 |
|
|---|
| 1985 | ##fixme: split v-e-r-y long TXT strings? will need to do so for BIND export, at least
|
|---|
| 1986 | $val =~ s/:/\\072/g; # may need to replace other symbols
|
|---|
| 1987 | print $datafile "'$host:$val:$ttl:$stamp:$loc\n";
|
|---|
| 1988 |
|
|---|
| 1989 | # by-hand TXT
|
|---|
| 1990 | #:deepnet.cx:16:2v\075spf1\040a\040a\072bacon.deepnet.cx\040a\072home.deepnet.cx\040-all:3600
|
|---|
| 1991 | #@ IN TXT "v=spf1 a a:bacon.deepnet.cx a:home.deepnet.cx -all"
|
|---|
| 1992 | #'deepnet.cx:v=spf1 a a\072bacon.deepnet.cx a\072home.deepnet.cx -all:3600
|
|---|
| 1993 |
|
|---|
| 1994 | #txttest IN TXT "v=foo bar:bob kn;ob' \" !@#$%^&*()-=_+[]{}<>?"
|
|---|
| 1995 | #:txttest.deepnet.cx:16:\054v\075foo\040bar\072bob\040kn\073ob\047\040\042\040\041\100\043\044\045\136\046\052\050\051-\075\137\053\133\135\173\175\074\076\077:3600
|
|---|
| 1996 |
|
|---|
| 1997 | # very long TXT record as brought in by axfr-get
|
|---|
| 1998 | # note tinydns does not support >512-byte RR data, need axfr-dns (for TCP support) for that
|
|---|
| 1999 | # also note, tinydns does not seem to support <512, >256-byte RRdata from axfr-get either. :/
|
|---|
| 2000 | #:longtxt.deepnet.cx:16:
|
|---|
| 2001 | #\170this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record.
|
|---|
| 2002 | #\263 it is really long. long. very long. really very long. this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record.
|
|---|
| 2003 | #\351 it is really long. long. very long. really very long.this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record. it is really long. long. very long. really very long.
|
|---|
| 2004 | #:3600
|
|---|
| 2005 |
|
|---|
| 2006 | } elsif ($typemap{$type} eq 'CNAME') {
|
|---|
| 2007 |
|
|---|
| 2008 | print $datafile "C$host:$val:$ttl:$stamp:$loc\n";
|
|---|
| 2009 |
|
|---|
| 2010 | } elsif ($typemap{$type} eq 'SRV') {
|
|---|
| 2011 |
|
|---|
| 2012 | # data is two-byte values for priority, weight, port, in that order,
|
|---|
| 2013 | # followed by length/string data
|
|---|
| 2014 |
|
|---|
| 2015 | print $datafile ":$host:33:".octalize($dist,'d').octalize($weight,'d').octalize($port,'d');
|
|---|
| 2016 |
|
|---|
| 2017 | $val .= '.' if $val !~ /\.$/;
|
|---|
| 2018 | foreach (split /\./, $val) {
|
|---|
| 2019 | printf $datafile "\\%0.3o%s", length($_), $_;
|
|---|
| 2020 | }
|
|---|
| 2021 | print $datafile "\\000:$ttl:$stamp:$loc\n";
|
|---|
| 2022 |
|
|---|
| 2023 | } elsif ($typemap{$type} eq 'RP') {
|
|---|
| 2024 |
|
|---|
| 2025 | # RP consists of two mostly free-form strings.
|
|---|
| 2026 | # The first is supposed to be an email address with @ replaced by . (as with the SOA contact)
|
|---|
| 2027 | # The second is the "hostname" of a TXT record with more info.
|
|---|
| 2028 | print $datafile ":$host:17:";
|
|---|
| 2029 | my ($who,$what) = split /\s/, $val;
|
|---|
| 2030 | foreach (split /\./, $who) {
|
|---|
| 2031 | printf $datafile "\\%0.3o%s", length($_), $_;
|
|---|
| 2032 | }
|
|---|
| 2033 | print $datafile '\000';
|
|---|
| 2034 | foreach (split /\./, $what) {
|
|---|
| 2035 | printf $datafile "\\%0.3o%s", length($_), $_;
|
|---|
| 2036 | }
|
|---|
| 2037 | print $datafile "\\000:$ttl:$stamp:$loc\n";
|
|---|
| 2038 |
|
|---|
| 2039 | } elsif ($typemap{$type} eq 'PTR') {
|
|---|
| 2040 |
|
|---|
| 2041 | # must handle both IPv4 and IPv6
|
|---|
| 2042 | ##work
|
|---|
| 2043 | # data should already be in suitable reverse order.
|
|---|
| 2044 | print $datafile "^$host:$val:$ttl:$stamp:$loc\n";
|
|---|
| 2045 |
|
|---|
| 2046 | } else {
|
|---|
| 2047 | # raw record. we don't know what's in here, so we ASS-U-ME the user has
|
|---|
| 2048 | # put it in correctly, since either the user is messing directly with the
|
|---|
| 2049 | # database, or the record was imported via AXFR
|
|---|
| 2050 | # <split by char>
|
|---|
| 2051 | # convert anything not a-zA-Z0-9.- to octal coding
|
|---|
| 2052 |
|
|---|
| 2053 | ##fixme: add flag to export "unknown" record types - note we'll probably end up
|
|---|
| 2054 | # mangling them since they were written to the DB from Net::DNS::RR::<type>->rdatastr.
|
|---|
| 2055 | #print $datafile ":$host:$type:$val:$ttl:$stamp:$loc\n";
|
|---|
| 2056 |
|
|---|
| 2057 | } # record type if-else
|
|---|
| 2058 |
|
|---|
| 2059 | } # while ($recsth)
|
|---|
| 2060 | } # while ($domsth)
|
|---|
| 2061 | } # end __export_tiny()
|
|---|
| 2062 |
|
|---|
| 2063 |
|
|---|
| 2064 | ## DNSDB::mailNotify()
|
|---|
| 2065 | # Sends notification mail to recipients regarding an IPDB operation
|
|---|
| 2066 | sub mailNotify {
|
|---|
| 2067 | my $dbh = shift;
|
|---|
| 2068 | my ($subj,$message) = @_;
|
|---|
| 2069 |
|
|---|
| 2070 | return if $config{mailhost} eq 'smtp.example.com'; # do nothing if still using default SMTP host.
|
|---|
| 2071 |
|
|---|
| 2072 | my $mailer = Net::SMTP->new($config{mailhost}, Hello => "dnsadmin.$config{domain}");
|
|---|
| 2073 |
|
|---|
| 2074 | my $mailsender = ($config{mailsender} ? $config{mailsender} : $config{mailnotify});
|
|---|
| 2075 |
|
|---|
| 2076 | $mailer->mail($mailsender);
|
|---|
| 2077 | $mailer->to($config{mailnotify});
|
|---|
| 2078 | $mailer->data("From: \"$config{mailname}\" <$mailsender>\n",
|
|---|
| 2079 | "To: <$config{mailnotify}>\n",
|
|---|
| 2080 | "Date: ".strftime("%a, %d %b %Y %H:%M:%S %z",localtime)."\n",
|
|---|
| 2081 | "Subject: $subj\n",
|
|---|
| 2082 | "X-Mailer: DNSAdmin Notify v".sprintf("%.1d",$DNSDB::VERSION)."\n",
|
|---|
| 2083 | "Organization: $config{orgname}\n",
|
|---|
| 2084 | "\n$message\n");
|
|---|
| 2085 | $mailer->quit;
|
|---|
| 2086 | }
|
|---|
| 2087 |
|
|---|
| 2088 | # shut Perl up
|
|---|
| 2089 | 1;
|
|---|
![[ DNS Administrator ]](/fx/dnsadmin-logo.png){kind=logo}
