source: trunk/DNSDB.pm@ 414

Last change on this file since 414 was 411, checked in by Kris Deugau, 12 years ago

/trunk

Check and munge state in DNSDB::updateUser(), same as addUser().
Clean up copy-paste job for dns-rpc.cgi updateUser and make sure it
works. See #43.

  • Property svn:keywords set to Date Rev Author Id
File size: 179.2 KB
Line 
1# dns/trunk/DNSDB.pm
2# Abstraction functions for DNS administration
3##
4# $Id: DNSDB.pm 411 2012-10-05 18:04:00Z kdeugau $
5# Copyright 2008-2012 Kris Deugau <kdeugau@deepnet.cx>
6#
7# This program is free software: you can redistribute it and/or modify
8# it under the terms of the GNU General Public License as published by
9# the Free Software Foundation, either version 3 of the License, or
10# (at your option) any later version.
11#
12# This program is distributed in the hope that it will be useful,
13# but WITHOUT ANY WARRANTY; without even the implied warranty of
14# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15# GNU General Public License for more details.
16#
17# You should have received a copy of the GNU General Public License
18# along with this program. If not, see <http://www.gnu.org/licenses/>.
19##
20
21package DNSDB;
22
23use strict;
24use warnings;
25use Exporter;
26use DBI;
27use Net::DNS;
28use Crypt::PasswdMD5;
29use Net::SMTP;
30use NetAddr::IP qw(:lower);
31use POSIX;
32use Fcntl qw(:flock);
33
34use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
35
36$VERSION = 1.1; ##VERSION##
37@ISA = qw(Exporter);
38@EXPORT_OK = qw(
39 &initGlobals &login &initActionLog
40 &initPermissions &getPermissions &changePermissions &comparePermissions
41 &changeGroup
42 &loadConfig &connectDB &finish
43 &addDomain &delZone &domainName &revName &domainID &revID &addRDNS
44 &getZoneCount &getZoneList &getZoneLocation
45 &addGroup &delGroup &getChildren &groupName
46 &getGroupCount &getGroupList
47 &addUser &updateUser &delUser &userFullName &userStatus &getUserData
48 &getUserCount &getUserList &getUserDropdown
49 &addLoc &updateLoc &delLoc &getLoc
50 &getLocCount &getLocList &getLocDropdown
51 &getSOA &updateSOA &getRecLine &getDomRecs &getRecCount
52 &addRec &updateRec &delRec
53 &getLogCount &getLogEntries
54 &getTypelist
55 &parentID
56 &isParent
57 &zoneStatus &importAXFR
58 &export
59 &mailNotify
60 %typemap %reverse_typemap %config
61 %permissions @permtypes $permlist %permchains
62 );
63
64@EXPORT = (); # Export nothing by default.
65%EXPORT_TAGS = ( ALL => [qw(
66 &initGlobals &login &initActionLog
67 &initPermissions &getPermissions &changePermissions &comparePermissions
68 &changeGroup
69 &loadConfig &connectDB &finish
70 &addDomain &delZone &domainName &revName &domainID &revID &addRDNS
71 &getZoneCount &getZoneList &getZoneLocation
72 &addGroup &delGroup &getChildren &groupName
73 &getGroupCount &getGroupList
74 &addUser &updateUser &delUser &userFullName &userStatus &getUserData
75 &getUserCount &getUserList &getUserDropdown
76 &addLoc &updateLoc &delLoc &getLoc
77 &getLocCount &getLocList &getLocDropdown
78 &getSOA &updateSOA &getRecLine &getDomRecs &getRecCount
79 &addRec &updateRec &delRec
80 &getLogCount &getLogEntries
81 &getTypelist
82 &parentID
83 &isParent
84 &zoneStatus &importAXFR
85 &export
86 &mailNotify
87 %typemap %reverse_typemap %config
88 %permissions @permtypes $permlist %permchains
89 )]
90 );
91
92our $group = 1;
93our $errstr = '';
94our $resultstr = '';
95
96# Halfway sane defaults for SOA, TTL, etc.
97# serial defaults to 0 for convenience.
98# value will be either YYYYMMDDNN for BIND/etc, or auto-internal for tinydns
99our %def = qw (
100 contact hostmaster.DOMAIN
101 prins ns1.myserver.com
102 serial 0
103 soattl 86400
104 refresh 10800
105 retry 3600
106 expire 604800
107 minttl 10800
108 ttl 10800
109);
110
111# Arguably defined wholly in the db, but little reason to change without supporting code changes
112# group_view, user_view permissions? separate rDNS permission(s)?
113our @permtypes = qw (
114 group_edit group_create group_delete
115 user_edit user_create user_delete
116 domain_edit domain_create domain_delete
117 record_edit record_create record_delete record_locchg
118 location_edit location_create location_delete location_view
119 self_edit admin
120);
121our $permlist = join(',',@permtypes);
122
123# Some permissions more or less require certain others.
124our %permchains = (
125 user_edit => 'self_edit',
126 location_edit => 'location_view',
127 location_create => 'location_view',
128 location_delete => 'location_view',
129 record_locchg => 'location_view',
130);
131
132# DNS record type map and reverse map.
133# loaded from the database, from http://www.iana.org/assignments/dns-parameters
134our %typemap;
135our %reverse_typemap;
136
137our %permissions;
138
139# Prepopulate a basic config. Note some of these *will* cause errors if left unset.
140# note: add appropriate stanzas in loadConfig to parse these
141our %config = (
142 # Database connection info
143 dbname => 'dnsdb',
144 dbuser => 'dnsdb',
145 dbpass => 'secret',
146 dbhost => '',
147
148 # Email notice settings
149 mailhost => 'smtp.example.com',
150 mailnotify => 'dnsdb@example.com', # to
151 mailsender => 'dnsdb@example.com', # from
152 mailname => 'DNS Administration',
153 orgname => 'Example Corp',
154 domain => 'example.com',
155
156 # Template directory
157 templatedir => 'templates/',
158# fmeh. this is a real web path, not a logical internal one. hm..
159# cssdir => 'templates/',
160 sessiondir => 'session/',
161 exportcache => 'cache/',
162
163 # Session params
164 timeout => '3600', # 1 hour default
165
166 # Other miscellanea
167 log_failures => 1, # log all evarthing by default
168 perpage => 15,
169 );
170
171## (Semi)private variables
172
173# Hash of functions for validating record types. Filled in initGlobals() since
174# it relies on visibility flags from the rectypes table in the DB
175my %validators;
176
177# Username, full name, ID - mainly for logging
178my %userdata;
179
180# Entity-relationship reference hashes.
181my %par_tbl = (
182 group => 'groups',
183 user => 'users',
184 defrec => 'default_records',
185 defrevrec => 'default_rev_records',
186 domain => 'domains',
187 revzone => 'revzones',
188 record => 'records'
189 );
190my %id_col = (
191 group => 'group_id',
192 user => 'user_id',
193 defrec => 'record_id',
194 defrevrec => 'record_id',
195 domain => 'domain_id',
196 revzone => 'rdns_id',
197 record => 'record_id'
198 );
199my %par_col = (
200 group => 'parent_group_id',
201 user => 'group_id',
202 defrec => 'group_id',
203 defrevrec => 'group_id',
204 domain => 'group_id',
205 revzone => 'group_id',
206 record => 'domain_id'
207 );
208my %par_type = (
209 group => 'group',
210 user => 'group',
211 defrec => 'group',
212 defrevrec => 'group',
213 domain => 'group',
214 revzone => 'group',
215 record => 'domain'
216 );
217
218##
219## utility functions
220##
221
222## DNSDB::_rectable()
223# Takes default+rdns flags, returns appropriate table name
224sub _rectable {
225 my $def = shift;
226 my $rev = shift;
227
228 return 'records' if $def ne 'y';
229 return 'default_records' if $rev ne 'y';
230 return 'default_rev_records';
231} # end _rectable()
232
233## DNSDB::_recparent()
234# Takes default+rdns flags, returns appropriate parent-id column name
235sub _recparent {
236 my $def = shift;
237 my $rev = shift;
238
239 return 'group_id' if $def eq 'y';
240 return 'rdns_id' if $rev eq 'y';
241 return 'domain_id';
242} # end _recparent()
243
244## DNSDB::_ipparent()
245# Check an IP to be added in a reverse zone to see if it's really in the requested parent.
246# Takes a database handle, default and reverse flags, IP (fragment) to check, parent zone ID,
247# and a reference to a NetAddr::IP object (also used to pass back a fully-reconstructed IP for
248# database insertion)
249sub _ipparent {
250 my $dbh = shift;
251 my $defrec = shift;
252 my $revrec = shift;
253 my $val = shift;
254 my $id = shift;
255 my $addr = shift;
256
257 return if $revrec ne 'y'; # this sub not useful in forward zones
258
259 $$addr = NetAddr::IP->new($$val); #necessary?
260
261 # subsub to split, reverse, and overlay an IP fragment on a netblock
262 sub __rev_overlay {
263 my $splitme = shift; # ':' or '.', m'lud?
264 my $parnet = shift;
265 my $val = shift;
266 my $addr = shift;
267
268 my $joinme = $splitme;
269 $splitme = '\.' if $splitme eq '.';
270 my @working = reverse(split($splitme, $parnet->addr));
271 my @parts = reverse(split($splitme, $$val));
272 for (my $i = 0; $i <= $#parts; $i++) {
273 $working[$i] = $parts[$i];
274 }
275 my $checkme = NetAddr::IP->new(join($joinme, reverse(@working))) or return 0;
276 return 0 unless $checkme->within($parnet);
277 $$addr = $checkme; # force "correct" IP to be recorded.
278 return 1;
279 }
280
281 my ($parstr) = $dbh->selectrow_array("SELECT revnet FROM revzones WHERE rdns_id = ?", undef, ($id));
282 my $parnet = NetAddr::IP->new($parstr);
283
284 # Fail early on v6-in-v4 or v4-in-v6. We're not accepting these ATM.
285 return 0 if $parnet->addr =~ /\./ && $$val =~ /:/;
286 return 0 if $parnet->addr =~ /:/ && $$val =~ /\./;
287
288 if ($$addr && ($$val =~ /^[\da-fA-F][\da-fA-F:]+[\da-fA-F]$/ || $$val =~ m|/\d+$|)) {
289 # the only case where NetAddr::IP's acceptance of legitimate IPs is "correct" is for a proper IPv6 address,
290 # or a netblock (only expected on templates)
291 # the rest we have to restructure before fiddling. *sigh*
292 return 1 if $$addr->within($parnet);
293 } else {
294 # We don't have a complete IP in $$val (yet)... unless we have a netblock
295 if ($parnet->addr =~ /:/) {
296 $$val =~ s/^:+//; # gotta strip'em all...
297 return __rev_overlay(':', $parnet, $val, $addr);
298 }
299 if ($parnet->addr =~ /\./) {
300 $$val =~ s/^\.+//;
301 return __rev_overlay('.', $parnet, $val, $addr);
302 }
303 # should be impossible to get here...
304 }
305 # ... and here.
306 # can't do nuttin' in forward zones
307} # end _ipparent()
308
309## DNSDB::_hostparent()
310# A little different than _ipparent above; this tries to *find* the parent zone of a hostname
311# Takes a database handle and hostname.
312# Returns the domain ID of the parent domain if one was found.
313sub _hostparent {
314 my $dbh = shift;
315 my $hname = shift;
316
317 $hname =~ s/^\*\.//; # this should be impossible to find in the domains table.
318 my @hostbits = split /\./, $hname;
319 my $sth = $dbh->prepare("SELECT count(*),domain_id FROM domains WHERE lower(domain) = lower(?) GROUP BY domain_id");
320 foreach (@hostbits) {
321 $sth->execute($hname);
322 my ($found, $parid) = $sth->fetchrow_array;
323 if ($found) {
324 return $parid;
325 }
326 $hname =~ s/^$_\.//;
327 }
328} # end _hostparent()
329
330## DNSDB::_log()
331# Log an action
332# Takes a database handle and log entry hash containing at least:
333# group_id, log entry
334# and optionally one or more of:
335# domain_id, rdns_id
336# The %userdata hash provides the user ID, username, and fullname
337sub _log {
338 my $dbh = shift;
339
340 my %args = @_;
341
342 $args{rdns_id} = 0 if !$args{rdns_id};
343 $args{domain_id} = 0 if !$args{domain_id};
344
345##fixme: farm out the actual logging to different subs for file, syslog, internal, etc based on config
346# if ($config{log_channel} eq 'sql') {
347 $dbh->do("INSERT INTO log (domain_id,rdns_id,group_id,entry,user_id,email,name) VALUES (?,?,?,?,?,?,?)",
348 undef,
349 ($args{domain_id}, $args{rdns_id}, $args{group_id}, $args{entry},
350 $userdata{userid}, $userdata{username}, $userdata{fullname}) );
351# } elsif ($config{log_channel} eq 'file') {
352# } elsif ($config{log_channel} eq 'syslog') {
353# }
354} # end _log
355
356
357##
358## Record validation subs.
359##
360
361## All of these subs take substantially the same arguments:
362# a database handle
363# a hash containing at least the following keys:
364# - defrec (default/live flag)
365# - revrec (forward/reverse flag)
366# - id (parent entity ID)
367# - host (hostname)
368# - rectype
369# - val (IP, hostname [CNAME/MX/SRV] or text)
370# - addr (NetAddr::IP object from val. May be undef.)
371# MX and SRV record validation also expect distance, and SRV records expect weight and port as well.
372# host, rectype, and addr should be references as these may be modified in validation
373
374# A record
375sub _validate_1 {
376 my $dbh = shift;
377
378 my %args = @_;
379
380 return ('FAIL', 'Reverse zones cannot contain A records') if $args{revrec} eq 'y';
381
382 # Coerce all hostnames to end in ".DOMAIN" for group/default records,
383 # or the intended parent domain for live records.
384 my $pname = ($args{defrec} eq 'y' ? 'DOMAIN' : domainName($dbh,$args{id}));
385 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
386
387 # Check IP is well-formed, and that it's a v4 address
388 # Fail on "compact" IPv4 variants, because they are not consistent and predictable.
389 return ('FAIL',"$typemap{${$args{rectype}}} record must be a valid IPv4 address")
390 unless ${$args{val}} =~ /^\d+\.\d+\.\d+\.\d+$/;
391 return ('FAIL',"$typemap{${$args{rectype}}} record must be a valid IPv4 address")
392 unless $args{addr} && !$args{addr}->{isv6};
393 # coerce IP/value to normalized form for storage
394 ${$args{val}} = $args{addr}->addr;
395
396 return ('OK','OK');
397} # done A record
398
399# NS record
400sub _validate_2 {
401 my $dbh = shift;
402
403 my %args = @_;
404
405 # Check that the target of the record is within the parent.
406 # Yes, host<->val are mixed up here; can't see a way to avoid it. :(
407 if ($args{defrec} eq 'n') {
408 # Check if IP/address/zone/"subzone" is within the parent
409 if ($args{revrec} eq 'y') {
410 my $tmpip = NetAddr::IP->new(${$args{val}});
411 my $pname = revName($dbh,$args{id});
412 return ('FAIL',"${$args{val}} not within $pname")
413 unless _ipparent($dbh, $args{defrec}, $args{revrec}, $args{val}, $args{id}, \$tmpip);
414 # Sub the returned thing for ZONE? This could get stupid if you have typos...
415 ${$args{val}} =~ s/ZONE/$tmpip->address/;
416 } else {
417 my $pname = domainName($dbh,$args{id});
418 ${$args{host}} = $pname if ${$args{host}} !~ /\.$pname$/;
419 }
420 } else {
421 # Default reverse NS records should always refer to the implied parent
422 ${$args{host}} = 'DOMAIN' if $args{revrec} eq 'n';
423 ${$args{val}} = 'ZONE' if $args{revrec} eq 'y';
424 }
425
426# Let this lie for now. Needs more magic.
427# # Check IP is well-formed, and that it's a v4 address
428# return ('FAIL',"A record must be a valid IPv4 address")
429# unless $addr && !$addr->{isv6};
430# # coerce IP/value to normalized form for storage
431# $$val = $addr->addr;
432
433 return ('OK','OK');
434} # done NS record
435
436# CNAME record
437sub _validate_5 {
438 my $dbh = shift;
439
440 my %args = @_;
441
442# Not really true, but these are only useful for delegating smaller-than-/24 IP blocks.
443# This is fundamentally a messy operation and should really just be taken care of by the
444# export process, not manual maintenance of the necessary records.
445 return ('FAIL', 'Reverse zones cannot contain CNAME records') if $args{revrec} eq 'y';
446
447 # Coerce all hostnames to end in ".DOMAIN" for group/default records,
448 # or the intended parent domain for live records.
449 my $pname = ($args{defrec} eq 'y' ? 'DOMAIN' : domainName($dbh,$args{id}));
450 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
451
452 return ('OK','OK');
453} # done CNAME record
454
455# SOA record
456sub _validate_6 {
457 # Smart monkeys won't stick their fingers in here; we have
458 # separate dedicated routines to deal with SOA records.
459 return ('OK','OK');
460} # done SOA record
461
462# PTR record
463sub _validate_12 {
464 my $dbh = shift;
465
466 my %args = @_;
467
468 if ($args{revrec} eq 'y') {
469 if ($args{defrec} eq 'n') {
470 return ('FAIL', "IP or IP fragment ${$args{val}} is not within ".revName($dbh, $args{id}))
471 unless _ipparent($dbh, $args{defrec}, $args{revrec}, $args{val}, $args{id}, \$args{addr});
472 ${$args{val}} = $args{addr}->addr;
473 } else {
474 if (${$args{val}} =~ /\./) {
475 # looks like a v4 or fragment
476 if (${$args{val}} =~ /^\d+\.\d+\.\d+\.\d+$/) {
477 # woo! a complete IP! validate it and normalize, or fail.
478 $args{addr} = NetAddr::IP->new(${$args{val}})
479 or return ('FAIL', "IP/value looks like IPv4 but isn't valid");
480 ${$args{val}} = $args{addr}->addr;
481 } else {
482 ${$args{val}} =~ s/^\.*/ZONE./ unless ${$args{val}} =~ /^ZONE/;
483 }
484 } elsif (${$args{val}} =~ /[a-f:]/) {
485 # looks like a v6 or fragment
486 ${$args{val}} =~ s/^:*/ZONE::/ if !$args{addr} && ${$args{val}} !~ /^ZONE/;
487 if ($args{addr}) {
488 if ($args{addr}->addr =~ /^0/) {
489 ${$args{val}} =~ s/^:*/ZONE::/ unless ${$args{val}} =~ /^ZONE/;
490 } else {
491 ${$args{val}} = $args{addr}->addr;
492 }
493 }
494 } else {
495 # bare number (probably). These could be v4 or v6, so we'll
496 # expand on these on creation of a reverse zone.
497 ${$args{val}} = "ZONE,${$args{val}}" unless ${$args{val}} =~ /^ZONE/;
498 }
499 ${$args{host}} =~ s/\.*$/\.$config{domain}/ if ${$args{host}} !~ /(?:$config{domain}|ADMINDOMAIN)$/;
500 }
501
502# Multiple PTR records do NOT generally do what most people believe they do,
503# and tend to fail in the most awkward way possible. Check and warn.
504# We use $val instead of $addr->addr since we may be in a defrec, and may have eg "ZONE::42" or "ZONE.12"
505
506 my @checkvals = (${$args{val}});
507 if (${$args{val}} =~ /,/) {
508 # push . and :: variants into checkvals if val has ,
509 my $tmp;
510 ($tmp = ${$args{val}}) =~ s/,/./;
511 push @checkvals, $tmp;
512 ($tmp = ${$args{val}}) =~ s/,/::/;
513 push @checkvals, $tmp;
514 }
515 my $pcsth = $dbh->prepare("SELECT count(*) FROM "._rectable($args{defrec},$args{revrec})." WHERE val = ?");
516 foreach my $checkme (@checkvals) {
517 if ($args{update}) {
518 # Record update. There should usually be an existing PTR (the record being updated)
519 my @ptrs = @{ $dbh->selectcol_arrayref("SELECT record_id FROM "._rectable($args{defrec},$args{revrec}).
520 " WHERE val = ?", undef, ($checkme)) };
521 return ('WARN', "PTR record for $checkme already exists; adding another will probably not do what you want")
522 if @ptrs && (!grep /^$args{update}$/, @ptrs);
523 } else {
524 # New record. Always warn if a PTR exists
525 my ($ptrcount) = $dbh->selectrow_array("SELECT count(*) FROM "._rectable($args{defrec},$args{revrec}).
526 " WHERE val = ?", undef, ($checkme));
527 return ('WARN', "PTR record for $checkme already exists; adding another will probably not do what you want")
528 if $ptrcount;
529 }
530 }
531
532 } else {
533 # Not absolutely true but only useful if you hack things up for sub-/24 v4 reverse delegations
534 # Simpler to just create the reverse zone and grant access for the customer to edit it, and create direct
535 # PTR records on export
536 return ('FAIL',"Forward zones cannot contain PTR records");
537 }
538
539 return ('OK','OK');
540} # done PTR record
541
542# MX record
543sub _validate_15 {
544 my $dbh = shift;
545
546 my %args = @_;
547
548# Not absolutely true but WTF use is an MX record for a reverse zone?
549 return ('FAIL', 'Reverse zones cannot contain MX records') if $args{revrec} eq 'y';
550
551 return ('FAIL', "Distance is required for MX records") unless defined(${$args{dist}});
552 ${$args{dist}} =~ s/\s*//g;
553 return ('FAIL',"Distance is required, and must be numeric") unless ${$args{dist}} =~ /^\d+$/;
554
555 ${$args{fields}} = "distance,";
556 push @{$args{vallist}}, ${$args{dist}};
557
558 # Coerce all hostnames to end in ".DOMAIN" for group/default records,
559 # or the intended parent domain for live records.
560 my $pname = ($args{defrec} eq 'y' ? 'DOMAIN' : domainName($dbh,$args{id}));
561 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
562
563# hmm.. this might work. except possibly for something pointing to "deadbeef.ca". <g>
564# if ($type == $reverse_typemap{NS} || $type == $reverse_typemap{MX} || $type == $reverse_typemap{SRV}) {
565# if ($val =~ /^\s*[\da-f:.]+\s*$/) {
566# return ('FAIL',"$val is not a valid IP address") if !$addr;
567# }
568# }
569
570 return ('OK','OK');
571} # done MX record
572
573# TXT record
574sub _validate_16 {
575 # Could arguably put a WARN return here on very long (>512) records
576 return ('OK','OK');
577} # done TXT record
578
579# RP record
580sub _validate_17 {
581 # Probably have to validate these some day
582 return ('OK','OK');
583} # done RP record
584
585# AAAA record
586sub _validate_28 {
587 my $dbh = shift;
588
589 my %args = @_;
590
591 return ('FAIL', 'Reverse zones cannot contain AAAA records') if $args{revrec} eq 'y';
592
593 # Coerce all hostnames to end in ".DOMAIN" for group/default records,
594 # or the intended parent domain for live records.
595 my $pname = ($args{defrec} eq 'y' ? 'DOMAIN' : domainName($dbh,$args{id}));
596 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
597
598 # Check IP is well-formed, and that it's a v6 address
599 return ('FAIL',"$typemap{${$args{rectype}}} record must be a valid IPv6 address")
600 unless $args{addr} && $args{addr}->{isv6};
601 # coerce IP/value to normalized form for storage
602 ${$args{val}} = $args{addr}->addr;
603
604 return ('OK','OK');
605} # done AAAA record
606
607# SRV record
608sub _validate_33 {
609 my $dbh = shift;
610
611 my %args = @_;
612
613# Not absolutely true but WTF use is an SRV record for a reverse zone?
614 return ('FAIL', 'Reverse zones cannot contain SRV records') if $args{revrec} eq 'y';
615
616 return ('FAIL', "Distance is required for SRV records") unless defined(${$args{dist}});
617 ${$args{dist}} =~ s/\s*//g;
618 return ('FAIL',"Distance is required, and must be numeric") unless ${$args{dist}} =~ /^\d+$/;
619
620 return ('FAIL',"SRV records must begin with _service._protocol [${$args{host}}]")
621 unless ${$args{host}} =~ /^_[A-Za-z]+\._[A-Za-z]+\.[a-zA-Z0-9-]+/;
622 return ('FAIL',"Port and weight are required for SRV records")
623 unless defined(${$args{weight}}) && defined(${$args{port}});
624 ${$args{weight}} =~ s/\s*//g;
625 ${$args{port}} =~ s/\s*//g;
626
627 return ('FAIL',"Port and weight are required, and must be numeric")
628 unless ${$args{weight}} =~ /^\d+$/ && ${$args{port}} =~ /^\d+$/;
629
630 ${$args{fields}} = "distance,weight,port,";
631 push @{$args{vallist}}, (${$args{dist}}, ${$args{weight}}, ${$args{port}});
632
633 # Coerce all hostnames to end in ".DOMAIN" for group/default records,
634 # or the intended parent domain for live records.
635 my $pname = ($args{defrec} eq 'y' ? 'DOMAIN' : domainName($dbh,$args{id}));
636 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
637
638 return ('OK','OK');
639} # done SRV record
640
641# Now the custom types
642
643# A+PTR record. With a very little bit of magic we can also use this sub to validate AAAA+PTR. Whee!
644sub _validate_65280 {
645 my $dbh = shift;
646
647 my %args = @_;
648
649 my $code = 'OK';
650 my $msg = 'OK';
651
652 if ($args{defrec} eq 'n') {
653 # live record; revrec determines whether we validate the PTR or A component first.
654
655 if ($args{revrec} eq 'y') {
656 ($code,$msg) = _validate_12($dbh, %args);
657 return ($code,$msg) if $code eq 'FAIL';
658
659 # Check if the reqested domain exists. If not, coerce the type down to PTR and warn.
660 if (!(${$args{domid}} = _hostparent($dbh, ${$args{host}}))) {
661 my $addmsg = "Record ".($args{update} ? 'updated' : 'added').
662 " as PTR instead of $typemap{${$args{rectype}}}; domain not found for ${$args{host}}";
663 $msg .= "\n$addmsg" if $code eq 'WARN';
664 $msg = $addmsg if $code eq 'OK';
665 ${$args{rectype}} = $reverse_typemap{PTR};
666 return ('WARN', $msg);
667 }
668
669 # Add domain ID to field list and values
670 ${$args{fields}} .= "domain_id,";
671 push @{$args{vallist}}, ${$args{domid}};
672
673 } else {
674 ($code,$msg) = _validate_1($dbh, %args) if ${$args{rectype}} == 65280;
675 ($code,$msg) = _validate_28($dbh, %args) if ${$args{rectype}} == 65281;
676 return ($code,$msg) if $code eq 'FAIL';
677
678 # Check if the requested reverse zone exists - note, an IP fragment won't
679 # work here since we don't *know* which parent to put it in.
680 # ${$args{val}} has been validated as a valid IP by now, in one of the above calls.
681 my ($revid) = $dbh->selectrow_array("SELECT rdns_id FROM revzones WHERE revnet >> ?".
682 " ORDER BY masklen(revnet) DESC", undef, (${$args{val}}));
683 if (!$revid) {
684 $msg = "Record ".($args{update} ? 'updated' : 'added')." as ".(${$args{rectype}} == 65280 ? 'A' : 'AAAA').
685 " instead of $typemap{${$args{rectype}}}; reverse zone not found for ${$args{val}}";
686 ${$args{rectype}} = (${$args{rectype}} == 65280 ? $reverse_typemap{A} : $reverse_typemap{AAAA});
687 return ('WARN', $msg);
688 }
689
690 # Check for duplicate PTRs. Note we don't have to play games with $code and $msg, because
691 # by definition there can't be duplicate PTRs if the reverse zone isn't managed here.
692 if ($args{update}) {
693 # Record update. There should usually be an existing PTR (the record being updated)
694 my @ptrs = @{ $dbh->selectcol_arrayref("SELECT record_id FROM "._rectable($args{defrec},$args{revrec}).
695 " WHERE val = ?", undef, (${$args{val}})) };
696 if (@ptrs && (!grep /^$args{update}$/, @ptrs)) {
697 $msg = "PTR record for ${$args{val}} already exists; adding another will probably not do what you want";
698 $code = 'WARN';
699 }
700 } else {
701 # New record. Always warn if a PTR exists
702 my ($ptrcount) = $dbh->selectrow_array("SELECT count(*) FROM "._rectable($args{defrec},$args{revrec}).
703 " WHERE val = ?", undef, (${$args{val}}));
704 $msg = "PTR record for ${$args{val}} already exists; adding another will probably not do what you want"
705 if $ptrcount;
706 $code = 'WARN' if $ptrcount;
707 }
708
709# my ($ptrcount) = $dbh->selectrow_array("SELECT count(*) FROM "._rectable($args{defrec},$args{revrec}).
710# " WHERE val = ?", undef, ${$args{val}});
711# if ($ptrcount) {
712# my $curid = $dbh->selectrow_array("SELECT record_id FROM "._rectable($args{defrec},$args{revrec}).
713# " WHERE val = ?
714# $msg = "PTR record for ${$args{val}} already exists; adding another will probably not do what you want";
715# $code = 'WARN';
716# }
717
718 ${$args{fields}} .= "rdns_id,";
719 push @{$args{vallist}}, $revid;
720 }
721
722 } else { # defrec eq 'y'
723 if ($args{revrec} eq 'y') {
724 ($code,$msg) = _validate_12($dbh, %args);
725 return ($code,$msg) if $code eq 'FAIL';
726 if (${$args{rectype}} == 65280) {
727 return ('FAIL',"A+PTR record must be a valid IPv4 address or fragment")
728 if ${$args{val}} =~ /:/;
729 ${$args{val}} =~ s/^ZONE,/ZONE./; # Clean up after uncertain IP-fragment-type from _validate_12
730 } elsif (${$args{rectype}} == 65281) {
731 return ('FAIL',"AAAA+PTR record must be a valid IPv6 address or fragment")
732 if ${$args{val}} =~ /\./;
733 ${$args{val}} =~ s/^ZONE,/ZONE::/; # Clean up after uncertain IP-fragment-type from _validate_12
734 }
735 } else {
736 # This is easy. I also can't see a real use-case for A/AAAA+PTR in *all* forward
737 # domains, since you wouldn't be able to substitute both domain and reverse zone
738 # sanely, and you'd end up with guaranteed over-replicated PTR records that would
739 # confuse the hell out of pretty much anything that uses them.
740##fixme: make this a config flag?
741 return ('FAIL', "$typemap{${$args{rectype}}} records not allowed in default domains");
742 }
743 }
744
745 return ($code, $msg);
746} # done A+PTR record
747
748# AAAA+PTR record
749# A+PTR above has been magicked to handle AAAA+PTR as well.
750sub _validate_65281 {
751 return _validate_65280(@_);
752} # done AAAA+PTR record
753
754# PTR template record
755sub _validate_65282 {
756 my $dbh = shift;
757
758 my %args = @_;
759
760 # we're *this* >.< close to being able to just call _validate_12... unfortunately we can't, quite.
761 if ($args{revrec} eq 'y') {
762 if ($args{defrec} eq 'n') {
763 return ('FAIL', "Template block ${$args{val}} is not within ".revName($dbh, $args{id}))
764 unless _ipparent($dbh, $args{defrec}, $args{revrec}, $args{val}, $args{id}, \$args{addr});
765##fixme: warn if $args{val} is not /31 or larger block?
766 ${$args{val}} = "$args{addr}";
767 } else {
768 if (${$args{val}} =~ /\./) {
769 # looks like a v4 or fragment
770 if (${$args{val}} =~ m|^\d+\.\d+\.\d+\.\d+(?:/\d+)?$|) {
771 # woo! a complete IP! validate it and normalize, or fail.
772 $args{addr} = NetAddr::IP->new(${$args{val}})
773 or return ('FAIL', "IP/value looks like IPv4 but isn't valid");
774 ${$args{val}} = "$args{addr}";
775 } else {
776 ${$args{val}} =~ s/^\.*/ZONE./ unless ${$args{val}} =~ /^ZONE/;
777 }
778 } elsif (${$args{val}} =~ /[a-f:]/) {
779 # looks like a v6 or fragment
780 ${$args{val}} =~ s/^:*/ZONE::/ if !$args{addr} && ${$args{val}} !~ /^ZONE/;
781 if ($args{addr}) {
782 if ($args{addr}->addr =~ /^0/) {
783 ${$args{val}} =~ s/^:*/ZONE::/ unless ${$args{val}} =~ /^ZONE/;
784 } else {
785 ${$args{val}} = "$args{addr}";
786 }
787 }
788 } else {
789 # bare number (probably). These could be v4 or v6, so we'll
790 # expand on these on creation of a reverse zone.
791 ${$args{val}} = "ZONE,${$args{val}}" unless ${$args{val}} =~ /^ZONE/;
792 }
793 }
794##fixme: validate %-patterns?
795
796# Unlike single PTR records, there is absolutely no way to sanely support multiple
797# PTR templates for the same block, since they expect to expand to all the individual
798# IPs on export. Nested templates should be supported though.
799
800 my @checkvals = (${$args{val}});
801 if (${$args{val}} =~ /,/) {
802 # push . and :: variants into checkvals if val has ,
803 my $tmp;
804 ($tmp = ${$args{val}}) =~ s/,/./;
805 push @checkvals, $tmp;
806 ($tmp = ${$args{val}}) =~ s/,/::/;
807 push @checkvals, $tmp;
808 }
809##fixme: this feels wrong still - need to restrict template pseudorecords to One Of Each
810# Per Netblock such that they don't conflict on export
811 my $typeck;
812# type 65282 -> ptr template -> look for any of 65282, 65283, 65284
813 $typeck = 'type=65283 OR type=65284' if ${$args{rectype}} == 65282;
814# type 65283 -> a+ptr template -> v4 -> look for 65282 or 65283
815 $typeck = 'type=65283' if ${$args{rectype}} == 65282;
816# type 65284 -> aaaa+ptr template -> v6 -> look for 65282 or 65284
817 $typeck = 'type=65284' if ${$args{rectype}} == 65282;
818 my $pcsth = $dbh->prepare("SELECT count(*) FROM "._rectable($args{defrec},$args{revrec})." WHERE val = ? ".
819 "AND (type=65282 OR $typeck)");
820 foreach my $checkme (@checkvals) {
821 $pcsth->execute($checkme);
822 my ($rc) = $pcsth->fetchrow_array;
823 return ('FAIL', "Only one template pseudorecord may exist for a given IP block") if $rc;
824 }
825
826 } else {
827 return ('FAIL', "Forward zones cannot contain PTR records");
828 }
829
830 return ('OK','OK');
831} # done PTR template record
832
833# A+PTR template record
834sub _validate_65283 {
835 my $dbh = shift;
836
837 my %args = @_;
838
839 my ($code,$msg) = ('OK','OK');
840
841##fixme: need to fiddle things since A+PTR templates are acceptable in live
842# forward zones but not default records
843 if ($args{defrec} eq 'n') {
844 if ($args{revrec} eq 'n') {
845 ($code,$msg) = _validate_1($dbh, %args) if ${$args{rectype}} == 65280;
846 ($code,$msg) = _validate_28($dbh, %args) if ${$args{rectype}} == 65281;
847 return ($code,$msg) if $code eq 'FAIL';
848
849 # Check if the requested reverse zone exists - note, an IP fragment won't
850 # work here since we don't *know* which parent to put it in.
851 # ${$args{val}} has been validated as a valid IP by now, in one of the above calls.
852 my ($revid) = $dbh->selectrow_array("SELECT rdns_id FROM revzones WHERE revnet >> ?".
853 " ORDER BY masklen(revnet) DESC", undef, (${$args{val}}));
854 # Fail if no match; we can't coerce a PTR-template type down to not include the PTR bit currently.
855 if (!$revid) {
856 $msg = "Can't ".($args{update} ? 'update' : 'add')." ${$args{host}}/${$args{val}} as ".
857 "$typemap{${$args{rectype}}}: reverse zone not found for ${$args{val}}";
858##fixme: add A template, AAAA template types?
859# ${$args{rectype}} = (${$args{rectype}} == 65280 ? $reverse_typemap{A} : $reverse_typemap{AAAA});
860 return ('FAIL', $msg);
861 }
862
863 # Add reverse zone ID to field list and values
864 ${$args{fields}} .= "rdns_id,";
865 push @{$args{vallist}}, $revid;
866
867 } else {
868 return ('FAIL', "IP or IP fragment ${$args{val}} is not within ".revName($dbh, $args{id}))
869 unless _ipparent($dbh, $args{defrec}, $args{revrec}, $args{val}, $args{id}, \$args{addr});
870 ${$args{val}} = "$args{addr}";
871
872 if (!(${$args{domid}} = _hostparent($dbh, ${$args{host}}))) {
873 my $addmsg = "Record ".($args{update} ? 'updated' : 'added').
874 " as PTR template instead of $typemap{${$args{rectype}}}; domain not found for ${$args{host}}";
875 $msg .= "\n$addmsg" if $code eq 'WARN';
876 $msg = $addmsg if $code eq 'OK';
877 ${$args{rectype}} = 65282;
878 return ('WARN', $msg);
879 }
880
881 # Add domain ID to field list and values
882 ${$args{fields}} .= "domain_id,";
883 push @{$args{vallist}}, ${$args{domid}};
884 }
885
886 } else {
887 my ($code,$msg) = _validate_65282($dbh, %args);
888 return ($code, $msg) if $code eq 'FAIL';
889 # get domain, check against ${$args{name}}
890 }
891
892 return ('OK','OK');
893} # done AAAA+PTR template record
894
895# AAAA+PTR template record
896sub _validate_65284 {
897 return ('OK','OK');
898} # done AAAA+PTR template record
899
900# Delegation record
901# This is essentially a specialized clone of the NS record, primarily useful
902# for delegating IPv4 sub-/24 reverse blocks
903sub _validate_65285 {
904 my $dbh = shift;
905
906 my %args = @_;
907
908# Almost, but not quite, identical to NS record validation.
909
910 # Check that the target of the record is within the parent.
911 # Yes, host<->val are mixed up here; can't see a way to avoid it. :(
912 if ($args{defrec} eq 'n') {
913 # Check if IP/address/zone/"subzone" is within the parent
914 if ($args{revrec} eq 'y') {
915 my $tmpip = NetAddr::IP->new(${$args{val}});
916 my $pname = revName($dbh,$args{id});
917 return ('FAIL',"${$args{val}} not within $pname")
918 unless _ipparent($dbh, $args{defrec}, $args{revrec}, $args{val}, $args{id}, \$tmpip);
919 # Normalize
920 ${$args{val}} = "$tmpip";
921 } else {
922 my $pname = domainName($dbh,$args{id});
923 ${$args{host}} =~ s/\.*$/\.$pname/ if ${$args{host}} !~ /$pname$/;
924 }
925 } else {
926 return ('FAIL',"Delegation records are not permitted in default record sets");
927 }
928 return ('OK','OK');
929}
930
931
932##
933## Record data substitution subs
934##
935
936# Replace ZONE in hostname, or create (most of) the actual proper zone name
937sub _ZONE {
938 my $zone = shift;
939 my $string = shift;
940 my $fr = shift || 'f'; # flag for forward/reverse order? nb: ignored for IP
941 my $sep = shift || '-'; # Separator character - unlikely we'll ever need more than . or -
942
943 my $prefix;
944
945 $string =~ s/,/./ if !$zone->{isv6};
946 $string =~ s/,/::/ if $zone->{isv6};
947
948 # Subbing ZONE in the host. We need to properly ID the netblock range
949 # The subbed text should have "network IP with trailing zeros stripped" for
950 # blocks lined up on octet (for v4) or hex-quad (for v6) boundaries
951 # For blocks that do NOT line up on these boundaries, we take the most
952 # significant octet or 16-bit chunk of the "broadcast" IP and append it
953 # after a double-dash
954 # ie:
955 # 8.0.0.0/6 -> 8.0.0.0 -> 11.255.255.255; sub should be 8--11
956 # 10.0.0.0/12 -> 10.0.0.0 -> 10.0.0.0 -> 10.15.255.255; sub should be 10-0--15
957 # 192.168.4.0/22 -> 192.168.4.0 -> 192.168.7.255; sub should be 192-168-4--7
958 # 192.168.0.8/29 -> 192.168.0.8 -> 192.168.0.15; sub should be 192-168-0-8--15
959 # Similar for v6
960
961 if (!$zone->{isv6}) { # IPv4
962
963 $prefix = $zone->network->addr; # Just In Case someone managed to slip in
964 # a funky subnet that had host bits set.
965 my $bc = $zone->broadcast->addr;
966
967 if ($zone->masklen > 24) {
968 $bc =~ s/^\d+\.\d+\.\d+\.//;
969 } elsif ($zone->masklen > 16) {
970 $prefix =~ s/\.0$//;
971 $bc =~ s/^\d+\.\d+\.//;
972 } elsif ($zone->masklen > 8) {
973 $bc =~ s/^\d+\.//;
974 $prefix =~ s/\.0\.0$//;
975 } else {
976 $prefix =~ s/\.0\.0\.0$//;
977 }
978 if ($zone->masklen % 8) {
979 $bc =~ s/(\.255)+$//;
980 $prefix .= "--$bc"; #"--".zone->masklen; # use range or mask length?
981 }
982 if ($fr eq 'f') {
983 $prefix =~ s/\.+/$sep/g;
984 } else {
985 $prefix = join($sep, reverse(split(/\./, $prefix)));
986 }
987
988 } else { # IPv6
989
990 if ($fr eq 'f') {
991
992 $prefix = $zone->network->addr; # Just In Case someone managed to slip in
993 # a funky subnet that had host bits set.
994 my $bc = $zone->broadcast->addr;
995 if (($zone->masklen % 16) != 0) {
996 # Strip trailing :0 off $prefix, and :ffff off the broadcast IP
997 for (my $i=0; $i<(7-int($zone->masklen / 16)); $i++) {
998 $prefix =~ s/:0$//;
999 $bc =~ s/:ffff$//;
1000 }
1001 # Strip the leading 16-bit chunks off the front of the broadcast IP
1002 $bc =~ s/^([a-f0-9]+:)+//;
1003 # Append the remaining 16-bit chunk to the prefix after "--"
1004 $prefix .= "--$bc";
1005 } else {
1006 # Strip off :0 from the end until we reach the netblock length.
1007 for (my $i=0; $i<(8-$zone->masklen / 16); $i++) {
1008 $prefix =~ s/:0$//;
1009 }
1010 }
1011 # Actually deal with the separator
1012 $prefix =~ s/:/$sep/g;
1013
1014 } else { # $fr eq 'f'
1015
1016 $prefix = $zone->network->full; # Just In Case someone managed to slip in
1017 # a funky subnet that had host bits set.
1018 my $bc = $zone->broadcast->full;
1019 $prefix =~ s/://g; # clean these out since they're not spaced right for this case
1020 $bc =~ s/://g;
1021 # Strip trailing 0 off $prefix, and f off the broadcast IP, to match the mask length
1022 for (my $i=0; $i<(31-int($zone->masklen / 4)); $i++) {
1023 $prefix =~ s/0$//;
1024 $bc =~ s/f$//;
1025 }
1026 # Split and reverse the order of the nibbles in the network/broadcast IPs
1027 # trim another 0 for nibble-aligned blocks first, but only if we really have a block, not an IP
1028 $prefix =~ s/0$// if $zone->masklen % 4 == 0 && $zone->masklen != 128;
1029 my @nbits = reverse split //, $prefix;
1030 my @bbits = reverse split //, $bc;
1031 # Handle the sub-nibble case. Eww. I feel dirty supporting this...
1032 $nbits[0] = "$nbits[0]-$bbits[0]" if ($zone->masklen % 4) != 0;
1033 # Glue it back together
1034 $prefix = join($sep, @nbits);
1035
1036 } # $fr ne 'f'
1037
1038 } # $zone->{isv6}
1039
1040 # Do the substitution, finally
1041 $string =~ s/ZONE/$prefix/;
1042 $string =~ s/--/-/ if $sep ne '-'; # - as separator needs extra help for sub-octet v4 netblocks
1043 return $string;
1044} # done _ZONE()
1045
1046# Not quite a substitution sub, but placed here as it's basically the inverse of above;
1047# given the .arpa zone name, return the CIDR netblock the zone is for.
1048# Supports v4 non-octet/non-classful netblocks as per the method outlined in the Grasshopper Book (2nd Ed p217-218)
1049# Does NOT support non-quad v6 netblocks via the same scheme; it shouldn't ever be necessary.
1050# Takes a nominal .arpa zone name, returns a success code and NetAddr::IP, or a fail code and message
1051sub _zone2cidr {
1052 my $zone = shift;
1053
1054 my $cidr;
1055 my $tmpcidr;
1056 my $warnmsg = '';
1057
1058 if ($zone =~ /\.in-addr\.arpa\.?$/) {
1059 # v4 revzone, formal zone name type
1060 my $tmpzone = $zone;
1061 $tmpzone =~ s/\.in-addr\.arpa\.?//;
1062 return ('FAIL', "Non-numerics in apparent IPv4 reverse zone name") if $tmpzone !~ /^(?:\d+-)?[\d\.]+$/;
1063
1064 # Snag the octet pieces
1065 my @octs = split /\./, $tmpzone;
1066
1067 # Map result of a range manipulation to a mask length change. Cheaper than finding the 2-root of $octets[0]+1.
1068 # Note we will not support /31 blocks, mostly due to issues telling "24-31" -> .24/29 apart from
1069 # "24-31" -> .24/31", with a litte bit of "/31 is icky".
1070 my %maskmap = ( 3 => 2, 7 => 3, 15 => 4, 31 => 5, 63 => 6, 127 => 7,
1071 30 => 2, 29 => 3, 28 => 4, 27 => 5, 26 => 6, 25 => 7
1072 );
1073
1074 # Handle "range" blocks, eg, 80-83.168.192.in-addr.arpa (192.168.80.0/22)
1075 # Need to take the size of the range to offset the basic octet-based mask length,
1076 # and make sure the first number in the range gets used as the network address for the block
1077 # Alternate form: The second number is actually the real netmask, not the end of the range.
1078 my $masklen = 0;
1079 if ($octs[0] =~ /^((\d+)-(\d+))$/) { # take the range...
1080 if (24 < $3 && $3 < 31) {
1081 # we have a real netmask
1082 $masklen = -$maskmap{$3};
1083 } else {
1084 # we have a range. NB: only real CIDR ranges are supported
1085 $masklen -= $maskmap{-(eval $1)}; # find the mask base...
1086 }
1087 $octs[0] = $2; # set the base octet of the range...
1088 }
1089 @octs = reverse @octs; # We can reverse the octet pieces now that we've extracted and munged any ranges
1090
1091# arguably we should only allow sub-octet range/mask in-addr.arpa
1092# specifications in the least significant octet, but the code is
1093# simpler if we deal with sub-octet delegations at any level.
1094
1095 # Now we find the "true" mask with the aid of the "base" calculated above
1096 if ($#octs == 0) {
1097 $masklen += 8;
1098 $tmpcidr = "$octs[0].0.0.0/$masklen"; # really hope we don't see one of these very often.
1099 } elsif ($#octs == 1) {
1100 $masklen += 16;
1101 $tmpcidr = "$octs[0].$octs[1].0.0/$masklen";
1102 } elsif ($#octs == 2) {
1103 $masklen += 24;
1104 $tmpcidr = "$octs[0].$octs[1].$octs[2].0/$masklen";
1105 } else {
1106 $masklen += 32;
1107 $tmpcidr = "$octs[0].$octs[1].$octs[2].$octs[3]/$masklen";
1108 }
1109
1110 } elsif ($zone =~ /\.ip6\.arpa$/) {
1111 # v6 revzone, formal zone name type
1112 my $tmpzone = $zone;
1113 $tmpzone =~ s/\.ip6\.arpa\.?//;
1114##fixme: if-n-when we decide we can support sub-nibble v6 zone names, we'll need to change this segment
1115 return ('FAIL', "Non-hexadecimals in apparent IPv6 reverse zone name") if $tmpzone !~ /^[a-fA-F\d\.]+$/;
1116 my @quads = reverse(split(/\./, $tmpzone));
1117 $warnmsg .= "Apparent sub-/64 IPv6 reverse zone\n" if $#quads > 15;
1118 my $nc;
1119 foreach (@quads) {
1120 $tmpcidr .= $_;
1121 $tmpcidr .= ":" if ++$nc % 4 == 0;
1122 }
1123 my $nq = 1 if $nc % 4 != 0;
1124 my $mask = $nc * 4; # need to do this here because we probably increment it below
1125 while ($nc++ % 4 != 0) {
1126 $tmpcidr .= "0";
1127 }
1128 $tmpcidr .= ($nq ? '::' : ':')."/$mask";
1129 }
1130
1131 # Just to be sure, use NetAddr::IP to validate. Saves a lot of nasty regex watching for valid octet values.
1132 return ('FAIL', "Invalid zone $zone (apparent netblock $tmpcidr)")
1133 unless $cidr = NetAddr::IP->new($tmpcidr);
1134
1135 if ($warnmsg) {
1136 $errstr = $warnmsg;
1137 return ('WARN', $cidr);
1138 }
1139 return ('OK', $cidr);
1140} # done _zone2cidr()
1141
1142# Record template %-parameter expansion, IPv4. Note that IPv6 doesn't
1143# really have a sane way to handle this type of expansion at the moment
1144# due to the size of the address space.
1145# Takes a reference to a template string to be expanded, and an IP to use in the replacement.
1146sub _template4_expand {
1147 my $tmpl = shift;
1148 my $ip = shift;
1149
1150 my @ipparts = split /\./, $ip;
1151 my @iphex;
1152 my @ippad;
1153 for (@ipparts) {
1154 push @iphex, sprintf("%x", $_);
1155 push @ippad, sprintf("%u.3", $_);
1156 }
1157
1158 # IP substitutions in template records:
1159 #major patterns:
1160 #dashed IP, forward and reverse
1161 #dotted IP, forward and reverse (even if forward is... dumb)
1162 # -> %r for reverse, %i for forward, leading - or . to indicate separator, defaults to -
1163 # %r or %-r => %4d-%3d-%2d-%1d
1164 # %.r => %4d.%3d.%2d.%1d
1165 # %i or %-i => %1d-%2d-%3d-%4d
1166 # %.i => %1d.%2d.%3d.%4d
1167 $$tmpl =~ s/\%r/\%4d-\%3d-\%2d-\%1d/g;
1168 $$tmpl =~ s/\%([-.])r/\%4d$1\%3d$1\%2d$1\%1d/g;
1169 $$tmpl =~ s/\%i/\%1d-\%2d-\%3d-\%4d/g;
1170 $$tmpl =~ s/\%([-.])i/\%1d$1\%2d$1\%3d$1\%4d/g;
1171
1172 #hex-coded IP
1173 # %h
1174 $$tmpl =~ s/\%h/$iphex[0]$iphex[1]$iphex[2]$iphex[3]/g;
1175
1176 #IP as decimal-coded 32-bit value
1177 # %d
1178 my $iptmp = $ipparts[0]*256*256*256 + $ipparts[1]*256*256 + $ipparts[2]*256 + $ipparts[3];
1179 $$tmpl =~ s/\%d/$iptmp/g;
1180
1181 #minor patterns (per-octet)
1182 # %[1234][dh0]
1183 #octet
1184 #hex-coded octet
1185 #0-padded octet
1186 $$tmpl =~ s/\%([1234])d/$ipparts[$1-1]/g;
1187 $$tmpl =~ s/\%([1234])h/$iphex[$1-1]/g;
1188 $$tmpl =~ s/\%([1234])h/$ippad[$1-1]/g;
1189} # _template4_expand()
1190
1191
1192##
1193## Initialization and cleanup subs
1194##
1195
1196
1197## DNSDB::loadConfig()
1198# Load the minimum required initial state (DB connect info) from a config file
1199# Load misc other bits while we're at it.
1200# Takes an optional hash that may contain:
1201# - basename and config path to look for
1202# - RPC flag (saves parsing the more complex RPC bits if not needed)
1203# Populates the %config and %def hashes
1204sub loadConfig {
1205 my %args = @_;
1206 $args{basename} = '' if !$args{basename};
1207 $args{rpcflag} = '' if !$args{rpcflag};
1208##fixme $args{basename} isn't doing what I think I thought I was trying to do.
1209
1210 my $deferr = ''; # place to put error from default config file in case we can't find either one
1211
1212 my $configroot = "/etc/dnsdb"; ##CFG_LEAF##
1213 $configroot = '' if $args{basename} =~ m|^/|;
1214 $args{basename} .= ".conf" if $args{basename} !~ /\.conf$/;
1215 my $defconfig = "$configroot/dnsdb.conf";
1216 my $siteconfig = "$configroot/$args{basename}";
1217
1218 # System defaults
1219 __cfgload("$defconfig", $args{rpcflag}) or $deferr = $errstr;
1220
1221 # Per-site-ish settings.
1222 if ($args{basename} ne '.conf') {
1223 unless (__cfgload("$siteconfig"), $args{rpcflag}) {
1224 $errstr = ($deferr ? "Error opening default config file $defconfig: $deferr\n" : '').
1225 "Error opening site config file $siteconfig";
1226 return;
1227 }
1228 }
1229
1230 # Munge log_failures.
1231 if ($config{log_failures} ne '1' && $config{log_failures} ne '0') {
1232 # true/false, on/off, yes/no all valid.
1233 if ($config{log_failures} =~ /^(?:true|false|on|off|yes|no)$/) {
1234 if ($config{log_failures} =~ /(?:true|on|yes)/) {
1235 $config{log_failures} = 1;
1236 } else {
1237 $config{log_failures} = 0;
1238 }
1239 } else {
1240 $errstr = "Bad log_failures setting $config{log_failures}";
1241 $config{log_failures} = 1;
1242 # Bad setting shouldn't be fatal.
1243 # return 2;
1244 }
1245 }
1246
1247 # All good, clear the error and go home.
1248 $errstr = '';
1249 return 1;
1250} # end loadConfig()
1251
1252
1253## DNSDB::__cfgload()
1254# Private sub to parse a config file and load it into %config
1255# Takes a file handle on an open config file
1256sub __cfgload {
1257 $errstr = '';
1258 my $cfgfile = shift;
1259 my $rpcflag = shift;
1260
1261 if (open CFG, "<$cfgfile") {
1262 while (<CFG>) {
1263 chomp;
1264 s/^\s*//;
1265 next if /^#/;
1266 next if /^$/;
1267# hmm. more complex bits in this file might require [heading] headers, maybe?
1268# $mode = $1 if /^\[(a-z)+]/;
1269 # DB connect info
1270 $config{dbname} = $1 if /^dbname\s*=\s*([a-z0-9_.-]+)/i;
1271 $config{dbuser} = $1 if /^dbuser\s*=\s*([a-z0-9_.-]+)/i;
1272 $config{dbpass} = $1 if /^dbpass\s*=\s*([a-z0-9_.-]+)/i;
1273 $config{dbhost} = $1 if /^dbhost\s*=\s*([a-z0-9_.-]+)/i;
1274 # SOA defaults
1275 $def{contact} = $1 if /^contact\s*=\s*([a-z0-9_.-]+)/i;
1276 $def{prins} = $1 if /^prins\s*=\s*([a-z0-9_.-]+)/i;
1277 $def{soattl} = $1 if /^soattl\s*=\s*(\d+)/i;
1278 $def{refresh} = $1 if /^refresh\s*=\s*(\d+)/i;
1279 $def{retry} = $1 if /^retry\s*=\s*(\d+)/i;
1280 $def{expire} = $1 if /^expire\s*=\s*(\d+)/i;
1281 $def{minttl} = $1 if /^minttl\s*=\s*(\d+)/i;
1282 $def{ttl} = $1 if /^ttl\s*=\s*(\d+)/i;
1283 # Mail settings
1284 $config{mailhost} = $1 if /^mailhost\s*=\s*([a-z0-9_.-]+)/i;
1285 $config{mailnotify} = $1 if /^mailnotify\s*=\s*([a-z0-9_.\@-]+)/i;
1286 $config{mailsender} = $1 if /^mailsender\s*=\s*([a-z0-9_.\@-]+)/i;
1287 $config{mailname} = $1 if /^mailname\s*=\s*([a-z0-9\s_.-]+)/i;
1288 $config{orgname} = $1 if /^orgname\s*=\s*([a-z0-9\s_.,'-]+)/i;
1289 $config{domain} = $1 if /^domain\s*=\s*([a-z0-9_.-]+)/i;
1290 # session - note this is fed directly to CGI::Session
1291 $config{timeout} = $1 if /^[tT][iI][mM][eE][oO][uU][tT]\s*=\s*(\d+[smhdwMy]?)/;
1292 $config{sessiondir} = $1 if m{^sessiondir\s*=\s*([a-z0-9/_.-]+)}i;
1293 # misc
1294 $config{log_failures} = $1 if /^log_failures\s*=\s*([a-z01]+)/i;
1295 $config{perpage} = $1 if /^perpage\s*=\s*(\d+)/i;
1296 $config{exportcache} = $1 if m{^exportcache\s*=\s*([a-z0-9/_.-]+)}i;
1297 # RPC options
1298 if ($rpcflag && /^rpc/) {
1299 if (my ($tmp) = /^rpc_iplist\s*=\s*(.+)/i) {
1300 my @ips = split /[,\s]+/, $tmp;
1301 my $rpcsys = shift @ips;
1302 push @{$config{rpcacl}{$rpcsys}}, @ips;
1303 }
1304 }
1305 }
1306 close CFG;
1307 } else {
1308 $errstr = $!;
1309 return;
1310 }
1311 return 1;
1312} # end __cfgload()
1313
1314
1315## DNSDB::connectDB()
1316# Creates connection to DNS database.
1317# Requires the database name, username, and password.
1318# Returns a handle to the db.
1319# Set up for a PostgreSQL db; could be any transactional DBMS with the
1320# right changes.
1321sub connectDB {
1322 $errstr = '';
1323 my $dbname = shift;
1324 my $user = shift;
1325 my $pass = shift;
1326 my $dbh;
1327 my $DSN = "DBI:Pg:dbname=$dbname";
1328
1329 my $host = shift;
1330 $DSN .= ";host=$host" if $host;
1331
1332# Note that we want to autocommit by default, and we will turn it off locally as necessary.
1333# We may not want to print gobbledygook errors; YMMV. Have to ponder that further.
1334 $dbh = DBI->connect($DSN, $user, $pass, {
1335 AutoCommit => 1,
1336 PrintError => 0
1337 })
1338 or return (undef, $DBI::errstr) if(!$dbh);
1339
1340##fixme: initialize the DB if we can't find the table (since, by definition, there's
1341# nothing there if we can't select from it...)
1342 my $tblsth = $dbh->prepare("SELECT count(*) FROM pg_catalog.pg_class WHERE relkind='r' AND relname=?");
1343 my ($tblcount) = $dbh->selectrow_array($tblsth, undef, ('misc'));
1344 return (undef,$DBI::errstr) if $dbh->err;
1345
1346#if ($tblcount == 0) {
1347# # create tables one at a time, checking for each.
1348# return (undef, "check table misc missing");
1349#}
1350
1351
1352# Return here if we can't select.
1353# This should retrieve the dbversion key.
1354 my $sth = $dbh->prepare("SELECT key,value FROM misc WHERE misc_id=1");
1355 $sth->execute();
1356 return (undef,$DBI::errstr) if ($sth->err);
1357
1358##fixme: do stuff to the DB on version mismatch
1359# x.y series should upgrade on $DNSDB::VERSION > misc(key=>version)
1360# DB should be downward-compatible; column defaults should give sane (if possibly
1361# useless-and-needs-help) values in columns an older software stack doesn't know about.
1362
1363# See if the select returned anything (or null data). This should
1364# succeed if the select executed, but...
1365 $sth->fetchrow();
1366 return (undef,$DBI::errstr) if ($sth->err);
1367
1368 $sth->finish;
1369
1370# If we get here, we should be OK.
1371 return ($dbh,"DB connection OK");
1372} # end connectDB
1373
1374
1375## DNSDB::finish()
1376# Cleans up after database handles and so on.
1377# Requires a database handle
1378sub finish {
1379 my $dbh = $_[0];
1380 $dbh->disconnect;
1381} # end finish
1382
1383
1384## DNSDB::initGlobals()
1385# Initialize global variables
1386# NB: this does NOT include web-specific session variables!
1387# Requires a database handle
1388sub initGlobals {
1389 my $dbh = shift;
1390
1391# load record types from database
1392 my $sth = $dbh->prepare("SELECT val,name,stdflag FROM rectypes");
1393 $sth->execute;
1394 while (my ($recval,$recname,$stdflag) = $sth->fetchrow_array()) {
1395 $typemap{$recval} = $recname;
1396 $reverse_typemap{$recname} = $recval;
1397 # now we fill the record validation function hash
1398 if ($stdflag < 5) {
1399 my $fn = "_validate_$recval";
1400 $validators{$recval} = \&$fn;
1401 } else {
1402 my $fn = "sub { return ('FAIL','Type $recval ($recname) not supported'); }";
1403 $validators{$recval} = eval $fn;
1404 }
1405 }
1406} # end initGlobals
1407
1408
1409## DNSDB::initRPC()
1410# Takes a database handle, remote username, and remote fullname.
1411# Sets up the RPC logging-pseudouser if needed.
1412# Sets the %userdata hash for logging.
1413# Returns undef on failure
1414sub initRPC {
1415 my $dbh = shift;
1416 my %args = @_;
1417
1418 return if !$args{username};
1419 return if !$args{fullname};
1420
1421 $args{username} = "$args{username}/$args{rpcsys}";
1422
1423 my $tmpuser = $dbh->selectrow_hashref("SELECT username,user_id AS userid,group_id,firstname,lastname,status".
1424 " FROM users WHERE username=?", undef, ($args{username}) );
1425 if (!$tmpuser) {
1426 $dbh->do("INSERT INTO users (username,password,firstname,type) VALUES (?,'RPC',?,'R')", undef,
1427 ($args{username}, $args{fullname}) );
1428 $tmpuser = $dbh->selectrow_hashref("SELECT username,user_id AS userid,group_id,firstname,lastname,status".
1429 " FROM users WHERE username=?", undef, ($args{username}) );
1430 }
1431 %userdata = %{$tmpuser};
1432 $userdata{lastname} = '' if !$userdata{lastname};
1433 $userdata{fullname} = "$userdata{firstname} $userdata{lastname} ($args{rpcsys})";
1434 return 1 if $tmpuser;
1435} # end initRPC()
1436
1437
1438## DNSDB::login()
1439# Takes a database handle, username and password
1440# Returns a userdata hash (UID, GID, username, fullname parts) if username exists,
1441# password matches the one on file, and account is not disabled
1442# Returns undef otherwise
1443sub login {
1444 my $dbh = shift;
1445 my $user = shift;
1446 my $pass = shift;
1447
1448 my $userinfo = $dbh->selectrow_hashref("SELECT user_id,group_id,password,firstname,lastname,status".
1449 " FROM users WHERE username=?",
1450 undef, ($user) );
1451 return if !$userinfo;
1452 return if !$userinfo->{status};
1453
1454 if ($userinfo->{password} =~ m|^\$1\$([A-Za-z0-9/.]+)\$|) {
1455 # native passwords (crypt-md5)
1456 return if $userinfo->{password} ne unix_md5_crypt($pass,$1);
1457 } elsif ($userinfo->{password} =~ /^[0-9a-f]{32}$/) {
1458 # VegaDNS import (hex-coded MD5)
1459 return if $userinfo->{password} ne md5_hex($pass);
1460 } else {
1461 # plaintext (convenient now and then)
1462 return if $userinfo->{password} ne $pass;
1463 }
1464
1465 return $userinfo;
1466} # end login()
1467
1468
1469## DNSDB::initActionLog()
1470# Set up action logging. Takes a database handle and user ID
1471# Sets some internal globals and Does The Right Thing to set up a logging channel.
1472# This sets up _log() to spew out log entries to the defined channel without worrying
1473# about having to open a file or a syslog channel
1474##fixme Need to call _initActionLog_blah() for various logging channels, configured
1475# via dnsdb.conf, in $config{log_channel} or something
1476# See https://secure.deepnet.cx/trac/dnsadmin/ticket/21
1477sub initActionLog {
1478 my $dbh = shift;
1479 my $uid = shift;
1480
1481 return if !$uid;
1482
1483 # snag user info for logging. there's got to be a way to not have to pass this back
1484 # and forth from a caller, but web usage means no persistence we can rely on from
1485 # the server side.
1486 my ($username,$fullname) = $dbh->selectrow_array("SELECT username, firstname || ' ' || lastname".
1487 " FROM users WHERE user_id=?", undef, ($uid));
1488##fixme: errors are unpossible!
1489
1490 $userdata{username} = $username;
1491 $userdata{userid} = $uid;
1492 $userdata{fullname} = $fullname;
1493
1494 # convert to real check once we have other logging channels
1495 # if ($config{log_channel} eq 'sql') {
1496 # Open Log, Sez Me!
1497 # }
1498
1499} # end initActionLog
1500
1501
1502## DNSDB::initPermissions()
1503# Set up permissions global
1504# Takes database handle and UID
1505sub initPermissions {
1506 my $dbh = shift;
1507 my $uid = shift;
1508
1509# %permissions = $(getPermissions($dbh,'user',$uid));
1510 getPermissions($dbh, 'user', $uid, \%permissions);
1511
1512} # end initPermissions()
1513
1514
1515## DNSDB::getPermissions()
1516# Get permissions from DB
1517# Requires DB handle, group or user flag, ID, and hashref.
1518sub getPermissions {
1519 my $dbh = shift;
1520 my $type = shift;
1521 my $id = shift;
1522 my $hash = shift;
1523
1524 my $sql = qq(
1525 SELECT
1526 p.admin,p.self_edit,
1527 p.group_create,p.group_edit,p.group_delete,
1528 p.user_create,p.user_edit,p.user_delete,
1529 p.domain_create,p.domain_edit,p.domain_delete,
1530 p.record_create,p.record_edit,p.record_delete,p.record_locchg,
1531 p.location_create,p.location_edit,p.location_delete,p.location_view
1532 FROM permissions p
1533 );
1534 if ($type eq 'group') {
1535 $sql .= qq(
1536 JOIN groups g ON g.permission_id=p.permission_id
1537 WHERE g.group_id=?
1538 );
1539 } else {
1540 $sql .= qq(
1541 JOIN users u ON u.permission_id=p.permission_id
1542 WHERE u.user_id=?
1543 );
1544 }
1545
1546 my $sth = $dbh->prepare($sql);
1547
1548 $sth->execute($id) or die "argh: ".$sth->errstr;
1549
1550# my $permref = $sth->fetchrow_hashref;
1551# return $permref;
1552# $hash = $permref;
1553# Eww. Need to learn how to forcibly drop a hashref onto an existing hash.
1554 ($hash->{admin},$hash->{self_edit},
1555 $hash->{group_create},$hash->{group_edit},$hash->{group_delete},
1556 $hash->{user_create},$hash->{user_edit},$hash->{user_delete},
1557 $hash->{domain_create},$hash->{domain_edit},$hash->{domain_delete},
1558 $hash->{record_create},$hash->{record_edit},$hash->{record_delete},$hash->{record_locchg},
1559 $hash->{location_create},$hash->{location_edit},$hash->{location_delete},$hash->{location_view}
1560 ) = $sth->fetchrow_array;
1561
1562} # end getPermissions()
1563
1564
1565## DNSDB::changePermissions()
1566# Update an ACL entry
1567# Takes a db handle, type, owner-id, and hashref for the changed permissions.
1568sub changePermissions {
1569 my $dbh = shift;
1570 my $type = shift;
1571 my $id = shift;
1572 my $newperms = shift;
1573 my $inherit = shift || 0;
1574
1575 my $resultmsg = '';
1576
1577 # see if we're switching from inherited to custom. for bonus points,
1578 # snag the permid and parent permid anyway, since we'll need the permid
1579 # to set/alter custom perms, and both if we're switching from custom to
1580 # inherited.
1581 my $sth = $dbh->prepare("SELECT (u.permission_id=g.permission_id) AS was_inherited,u.permission_id,g.permission_id,".
1582 ($type eq 'user' ? 'u.group_id,u.username' : 'u.parent_group_id,u.group_name').
1583 " FROM ".($type eq 'user' ? 'users' : 'groups')." u ".
1584 " JOIN groups g ON u.".($type eq 'user' ? '' : 'parent_')."group_id=g.group_id ".
1585 " WHERE u.".($type eq 'user' ? 'user' : 'group')."_id=?");
1586 $sth->execute($id);
1587
1588 my ($wasinherited,$permid,$parpermid,$parid,$name) = $sth->fetchrow_array;
1589
1590# hack phtoui
1591# group id 1 is "special" in that it's it's own parent (err... possibly.)
1592# may make its parent id 0 which doesn't exist, and as a bonus is Perl-false.
1593 $wasinherited = 0 if ($type eq 'group' && $id == 1);
1594
1595 local $dbh->{AutoCommit} = 0;
1596 local $dbh->{RaiseError} = 1;
1597
1598 # Wrap all the SQL in a transaction
1599 eval {
1600 if ($inherit) {
1601
1602 $dbh->do("UPDATE ".($type eq 'user' ? 'users' : 'groups')." SET inherit_perm='t',permission_id=? ".
1603 "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($parpermid, $id) );
1604 $dbh->do("DELETE FROM permissions WHERE permission_id=?", undef, ($permid) );
1605
1606 } else {
1607
1608 if ($wasinherited) { # munge new permission entry in if we're switching from inherited perms
1609##fixme: need to add semirecursive bit to properly munge inherited permission ID on subgroups and users
1610# ... if'n'when we have groups with fully inherited permissions.
1611 # SQL is coo
1612 $dbh->do("INSERT INTO permissions ($permlist,".($type eq 'user' ? 'user' : 'group')."_id) ".
1613 "SELECT $permlist,? FROM permissions WHERE permission_id=?", undef, ($id,$permid) );
1614 ($permid) = $dbh->selectrow_array("SELECT permission_id FROM permissions ".
1615 "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($id) );
1616 $dbh->do("UPDATE ".($type eq 'user' ? 'users' : 'groups')." SET inherit_perm='f',permission_id=? ".
1617 "WHERE ".($type eq 'user' ? 'user' : 'group')."_id=?", undef, ($permid, $id) );
1618 }
1619
1620 # and now set the permissions we were passed
1621 foreach (@permtypes) {
1622 if (defined ($newperms->{$_})) {
1623 $dbh->do("UPDATE permissions SET $_=? WHERE permission_id=?", undef, ($newperms->{$_},$permid) );
1624 }
1625 }
1626
1627 } # (inherited->)? custom
1628
1629 if ($type eq 'user') {
1630 $resultmsg = "Updated permissions for user $name";
1631 } else {
1632 $resultmsg = "Updated default permissions for group $name";
1633 }
1634 _log($dbh, (group_id => ($type eq 'user' ? $parid : $id), entry => $resultmsg));
1635 $dbh->commit;
1636 }; # end eval
1637 if ($@) {
1638 my $msg = $@;
1639 eval { $dbh->rollback; };
1640 return ('FAIL',"Error changing permissions: $msg");
1641 }
1642
1643 return ('OK',$resultmsg);
1644} # end changePermissions()
1645
1646
1647## DNSDB::comparePermissions()
1648# Compare two permission hashes
1649# Returns '>', '<', '=', '!'
1650sub comparePermissions {
1651 my $p1 = shift;
1652 my $p2 = shift;
1653
1654 my $retval = '='; # assume equality until proven otherwise
1655
1656 no warnings "uninitialized";
1657
1658 foreach (@permtypes) {
1659 next if $p1->{$_} == $p2->{$_}; # equal is good
1660 if ($p1->{$_} && !$p2->{$_}) {
1661 if ($retval eq '<') { # if we've already found an unequal pair where
1662 $retval = '!'; # $p2 has more access, and we now find a pair
1663 last; # where $p1 has more access, the overall access
1664 } # is neither greater or lesser, it's unequal.
1665 $retval = '>';
1666 }
1667 if (!$p1->{$_} && $p2->{$_}) {
1668 if ($retval eq '>') { # if we've already found an unequal pair where
1669 $retval = '!'; # $p1 has more access, and we now find a pair
1670 last; # where $p2 has more access, the overall access
1671 } # is neither greater or lesser, it's unequal.
1672 $retval = '<';
1673 }
1674 }
1675 return $retval;
1676} # end comparePermissions()
1677
1678
1679## DNSDB::changeGroup()
1680# Change group ID of an entity
1681# Takes a database handle, entity type, entity ID, and new group ID
1682sub changeGroup {
1683 my $dbh = shift;
1684 my $type = shift;
1685 my $id = shift;
1686 my $newgrp = shift;
1687
1688##fixme: fail on not enough args
1689 #return ('FAIL', "Missing
1690
1691 return ('FAIL', "Can't change the group of a $type")
1692 unless grep /^$type$/, ('domain','revzone','user','group'); # could be extended for defrecs?
1693
1694 # Collect some names for logging and messages
1695 my $entname;
1696 if ($type eq 'domain') {
1697 $entname = domainName($dbh, $id);
1698 } elsif ($type eq 'revzone') {
1699 $entname = revName($dbh, $id);
1700 } elsif ($type eq 'user') {
1701 $entname = userFullName($dbh, $id, '%u');
1702 } elsif ($type eq 'group') {
1703 $entname = groupName($dbh, $id);
1704 }
1705
1706 my ($oldgid) = $dbh->selectrow_array("SELECT group_id FROM $par_tbl{$type} WHERE $id_col{$type}=?",
1707 undef, ($id));
1708 my $oldgname = groupName($dbh, $oldgid);
1709 my $newgname = groupName($dbh, $newgrp);
1710
1711 return ('FAIL', "Can't move things into a group that doesn't exist") if !$newgname;
1712
1713 return ('WARN', "Nothing to do, new group is the same as the old group") if $oldgid == $newgrp;
1714
1715 # Allow transactions, and raise an exception on errors so we can catch it later.
1716 # Use local to make sure these get "reset" properly on exiting this block
1717 local $dbh->{AutoCommit} = 0;
1718 local $dbh->{RaiseError} = 1;
1719
1720 eval {
1721 $dbh->do("UPDATE $par_tbl{$type} SET group_id=? WHERE $id_col{$type}=?", undef, ($newgrp, $id));
1722 # Log the change in both the old and new groups
1723 _log($dbh, (group_id => $oldgid, entry => "Moved $type $entname from $oldgname to $newgname"));
1724 _log($dbh, (group_id => $newgrp, entry => "Moved $type $entname from $oldgname to $newgname"));
1725 $dbh->commit;
1726 };
1727 if ($@) {
1728 my $msg = $@;
1729 eval { $dbh->rollback; };
1730 if ($config{log_failures}) {
1731 _log($dbh, (group_id => $oldgid, entry => "Error moving $type $entname to $newgname: $msg"));
1732 $dbh->commit; # since we enabled transactions earlier
1733 }
1734 return ('FAIL',"Error moving $type $entname to $newgname: $msg");
1735 }
1736
1737 return ('OK',"Moved $type $entname from $oldgname to $newgname");
1738} # end changeGroup()
1739
1740
1741##
1742## Processing subs
1743##
1744
1745## DNSDB::addDomain()
1746# Add a domain
1747# Takes a database handle, domain name, numeric group, boolean(ish) state (active/inactive),
1748# and user info hash (for logging).
1749# Returns a status code and message
1750sub addDomain {
1751 $errstr = '';
1752 my $dbh = shift;
1753 return ('FAIL',"Need database handle") if !$dbh;
1754 my $domain = shift;
1755 return ('FAIL',"Domain must not be blank") if !$domain;
1756 my $group = shift;
1757 return ('FAIL',"Need group") if !defined($group);
1758 my $state = shift;
1759 return ('FAIL',"Need domain status") if !defined($state);
1760
1761 $state = 1 if $state =~ /^active$/;
1762 $state = 1 if $state =~ /^on$/;
1763 $state = 0 if $state =~ /^inactive$/;
1764 $state = 0 if $state =~ /^off$/;
1765
1766 return ('FAIL',"Invalid domain status") if $state !~ /^\d+$/;
1767
1768 return ('FAIL', "Invalid characters in domain") if $domain !~ /^[a-zA-Z0-9_.-]+$/;
1769
1770 my $sth = $dbh->prepare("SELECT domain_id FROM domains WHERE lower(domain) = lower(?)");
1771 my $dom_id;
1772
1773# quick check to start to see if we've already got one
1774 $sth->execute($domain);
1775 ($dom_id) = $sth->fetchrow_array;
1776
1777 return ('FAIL', "Domain already exists") if $dom_id;
1778
1779 # Allow transactions, and raise an exception on errors so we can catch it later.
1780 # Use local to make sure these get "reset" properly on exiting this block
1781 local $dbh->{AutoCommit} = 0;
1782 local $dbh->{RaiseError} = 1;
1783
1784 # Wrap all the SQL in a transaction
1785 eval {
1786 # insert the domain...
1787 $dbh->do("INSERT INTO domains (domain,group_id,status) VALUES (?,?,?)", undef, ($domain, $group, $state));
1788
1789 # get the ID...
1790 ($dom_id) = $dbh->selectrow_array("SELECT domain_id FROM domains WHERE lower(domain) = lower(?)",
1791 undef, ($domain));
1792
1793 _log($dbh, (domain_id => $dom_id, group_id => $group,
1794 entry => "Added ".($state ? 'active' : 'inactive')." domain $domain"));
1795
1796 # ... and now we construct the standard records from the default set. NB: group should be variable.
1797 my $sth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl FROM default_records WHERE group_id=?");
1798 my $sth_in = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,distance,weight,port,ttl)".
1799 " VALUES ($dom_id,?,?,?,?,?,?,?)");
1800 $sth->execute($group);
1801 while (my ($host,$type,$val,$dist,$weight,$port,$ttl) = $sth->fetchrow_array()) {
1802 $host =~ s/DOMAIN/$domain/g;
1803 $val =~ s/DOMAIN/$domain/g;
1804 $sth_in->execute($host,$type,$val,$dist,$weight,$port,$ttl);
1805 if ($typemap{$type} eq 'SOA') {
1806 my @tmp1 = split /:/, $host;
1807 my @tmp2 = split /:/, $val;
1808 _log($dbh, (domain_id => $dom_id, group_id => $group,
1809 entry => "[new $domain] Added SOA record [contact $tmp1[0]] [master $tmp1[1]] ".
1810 "[refresh $tmp2[0]] [retry $tmp2[1]] [expire $tmp2[2]] [minttl $tmp2[3]], TTL $ttl"));
1811 } else {
1812 my $logentry = "[new $domain] Added record '$host $typemap{$type}";
1813 $logentry .= " [distance $dist]" if $typemap{$type} eq 'MX';
1814 $logentry .= " [priority $dist] [weight $weight] [port $port]" if $typemap{$type} eq 'SRV';
1815 _log($dbh, (domain_id => $dom_id, group_id => $group,
1816 entry => $logentry." $val', TTL $ttl"));
1817 }
1818 }
1819
1820 # once we get here, we should have suceeded.
1821 $dbh->commit;
1822 }; # end eval
1823
1824 if ($@) {
1825 my $msg = $@;
1826 eval { $dbh->rollback; };
1827 _log($dbh, (group_id => $group, entry => "Failed adding domain $domain ($msg)"))
1828 if $config{log_failures};
1829 $dbh->commit; # since we enabled transactions earlier
1830 return ('FAIL',$msg);
1831 } else {
1832 return ('OK',$dom_id);
1833 }
1834} # end addDomain
1835
1836
1837## DNSDB::delZone()
1838# Delete a forward or reverse zone.
1839# Takes a database handle, zone ID, and forward/reverse flag.
1840# for now, just delete the records, then the domain.
1841# later we may want to archive it in some way instead (status code 2, for example?)
1842sub delZone {
1843 my $dbh = shift;
1844 my $zoneid = shift;
1845 my $revrec = shift;
1846
1847 # Allow transactions, and raise an exception on errors so we can catch it later.
1848 # Use local to make sure these get "reset" properly on exiting this block
1849 local $dbh->{AutoCommit} = 0;
1850 local $dbh->{RaiseError} = 1;
1851
1852 my $msg = '';
1853 my $failmsg = '';
1854 my $zone = ($revrec eq 'n' ? domainName($dbh, $zoneid) : revName($dbh, $zoneid));
1855
1856 return ('FAIL', ($revrec eq 'n' ? 'Domain' : 'Reverse zone')." ID $zoneid doesn't exist") if !$zone;
1857
1858 # Set this up here since we may use if if $config{log_failures} is enabled
1859 my %loghash;
1860 $loghash{domain_id} = $zoneid if $revrec eq 'n';
1861 $loghash{rdns_id} = $zoneid if $revrec eq 'y';
1862 $loghash{group_id} = parentID($dbh,
1863 (id => $zoneid, type => ($revrec eq 'n' ? 'domain' : 'revzone'), revrec => $revrec) );
1864
1865 # Wrap all the SQL in a transaction
1866 eval {
1867 # Disentangle custom record types before removing the
1868 # ones that are only in the zone to be deleted
1869 if ($revrec eq 'n') {
1870 my $sth = $dbh->prepare("UPDATE records SET type=?,domain_id=0 WHERE domain_id=? AND type=?");
1871 $failmsg = "Failure converting multizone types to single-zone";
1872 $sth->execute($reverse_typemap{PTR}, $zoneid, 65280);
1873 $sth->execute($reverse_typemap{PTR}, $zoneid, 65281);
1874 $sth->execute(65282, $zoneid, 65283);
1875 $sth->execute(65282, $zoneid, 65284);
1876 $failmsg = "Failure removing domain records";
1877 $dbh->do("DELETE FROM records WHERE domain_id=?", undef, ($zoneid));
1878 $failmsg = "Failure removing domain";
1879 $dbh->do("DELETE FROM domains WHERE domain_id=?", undef, ($zoneid));
1880 } else {
1881 my $sth = $dbh->prepare("UPDATE records SET type=?,rdns_id=0 WHERE rdns_id=? AND type=?");
1882 $failmsg = "Failure converting multizone types to single-zone";
1883 $sth->execute($reverse_typemap{A}, $zoneid, 65280);
1884 $sth->execute($reverse_typemap{AAAA}, $zoneid, 65281);
1885# We don't have an "A template" or "AAAA template" type, although it might be useful for symmetry.
1886# $sth->execute(65286?, $zoneid, 65283);
1887# $sth->execute(65286?, $zoneid, 65284);
1888 $failmsg = "Failure removing reverse records";
1889 $dbh->do("DELETE FROM records WHERE rdns_id=?", undef, ($zoneid));
1890 $failmsg = "Failure removing reverse zone";
1891 $dbh->do("DELETE FROM revzones WHERE rdns_id=?", undef, ($zoneid));
1892 }
1893
1894 $msg = "Deleted ".($revrec eq 'n' ? 'domain' : 'reverse zone')." $zone";
1895 $loghash{entry} = $msg;
1896 _log($dbh, %loghash);
1897
1898 # once we get here, we should have suceeded.
1899 $dbh->commit;
1900 }; # end eval
1901
1902 if ($@) {
1903 $msg = $@;
1904 eval { $dbh->rollback; };
1905 $loghash{entry} = "Error deleting $zone: $msg ($failmsg)";
1906 if ($config{log_failures}) {
1907 _log($dbh, %loghash);
1908 $dbh->commit; # since we enabled transactions earlier
1909 }
1910 return ('FAIL', $loghash{entry});
1911 } else {
1912 return ('OK', $msg);
1913 }
1914
1915} # end delZone()
1916
1917
1918## DNSDB::domainName()
1919# Return the domain name based on a domain ID
1920# Takes a database handle and the domain ID
1921# Returns the domain name or undef on failure
1922sub domainName {
1923 $errstr = '';
1924 my $dbh = shift;
1925 my $domid = shift;
1926 my ($domname) = $dbh->selectrow_array("SELECT domain FROM domains WHERE domain_id=?", undef, ($domid) );
1927 $errstr = $DBI::errstr if !$domname;
1928 return $domname if $domname;
1929} # end domainName()
1930
1931
1932## DNSDB::revName()
1933# Return the reverse zone name based on an rDNS ID
1934# Takes a database handle and the rDNS ID
1935# Returns the reverse zone name or undef on failure
1936sub revName {
1937 $errstr = '';
1938 my $dbh = shift;
1939 my $revid = shift;
1940 my ($revname) = $dbh->selectrow_array("SELECT revnet FROM revzones WHERE rdns_id=?", undef, ($revid) );
1941 $errstr = $DBI::errstr if !$revname;
1942 return $revname if $revname;
1943} # end revName()
1944
1945
1946## DNSDB::domainID()
1947# Takes a database handle and domain name
1948# Returns the domain ID number
1949sub domainID {
1950 $errstr = '';
1951 my $dbh = shift;
1952 my $domain = shift;
1953 my ($domid) = $dbh->selectrow_array("SELECT domain_id FROM domains WHERE lower(domain) = lower(?)",
1954 undef, ($domain) );
1955 $errstr = $DBI::errstr if !$domid;
1956 return $domid if $domid;
1957} # end domainID()
1958
1959
1960## DNSDB::revID()
1961# Takes a database handle and reverse zone name
1962# Returns the rDNS ID number
1963sub revID {
1964 $errstr = '';
1965 my $dbh = shift;
1966 my $revzone = shift;
1967 my ($revid) = $dbh->selectrow_array("SELECT rdns_id FROM revzones WHERE revnet=?", undef, ($revzone) );
1968 $errstr = $DBI::errstr if !$revid;
1969 return $revid if $revid;
1970} # end revID()
1971
1972
1973## DNSDB::addRDNS
1974# Adds a reverse DNS zone
1975# Takes a database handle, CIDR block, reverse DNS pattern, numeric group,
1976# and boolean(ish) state (active/inactive)
1977# Returns a status code and message
1978sub addRDNS {
1979 my $dbh = shift;
1980 my $zone = NetAddr::IP->new(shift);
1981 return ('FAIL',"Zone name must be a valid CIDR netblock") unless ($zone && $zone->addr !~ /^0/);
1982 my $revpatt = shift; # construct a custom (A/AAAA+)? PTR template record
1983 my $group = shift;
1984 my $state = shift;
1985
1986 $state = 1 if $state =~ /^active$/;
1987 $state = 1 if $state =~ /^on$/;
1988 $state = 0 if $state =~ /^inactive$/;
1989 $state = 0 if $state =~ /^off$/;
1990
1991 return ('FAIL',"Invalid zone status") if $state !~ /^\d+$/;
1992
1993# quick check to start to see if we've already got one
1994 my ($rdns_id) = $dbh->selectrow_array("SELECT rdns_id FROM revzones WHERE revnet=?", undef, ("$zone"));
1995
1996 return ('FAIL', "Zone already exists") if $rdns_id;
1997
1998 # Allow transactions, and raise an exception on errors so we can catch it later.
1999 # Use local to make sure these get "reset" properly on exiting this block
2000 local $dbh->{AutoCommit} = 0;
2001 local $dbh->{RaiseError} = 1;
2002
2003 my $warnstr = '';
2004 my $defttl = 3600; # 1 hour should be reasonable. And unless things have gone horribly
2005 # wrong, we should have a value to override this anyway.
2006
2007 # Wrap all the SQL in a transaction
2008 eval {
2009 # insert the domain...
2010 $dbh->do("INSERT INTO revzones (revnet,group_id,status) VALUES (?,?,?)", undef, ($zone, $group, $state));
2011
2012 # get the ID...
2013 ($rdns_id) = $dbh->selectrow_array("SELECT currval('revzones_rdns_id_seq')");
2014
2015 _log($dbh, (rdns_id => $rdns_id, group_id => $group,
2016 entry => "Added ".($state ? 'active' : 'inactive')." reverse zone $zone"));
2017
2018 # ... and now we construct the standard records from the default set. NB: group should be variable.
2019 my $sth = $dbh->prepare("SELECT host,type,val,ttl FROM default_rev_records WHERE group_id=?");
2020 my $sth_in = $dbh->prepare("INSERT INTO records (rdns_id,domain_id,host,type,val,ttl)".
2021 " VALUES ($rdns_id,?,?,?,?,?)");
2022 $sth->execute($group);
2023 while (my ($host,$type,$val,$ttl) = $sth->fetchrow_array()) {
2024 # Silently skip v4/v6 mismatches. This is not an error, this is expected.
2025 if ($zone->{isv6}) {
2026 next if ($type == 65280 || $type == 65283);
2027 } else {
2028 next if ($type == 65281 || $type == 65284);
2029 }
2030
2031 $host =~ s/ADMINDOMAIN/$config{domain}/g;
2032
2033 # Check to make sure the IP stubs will fit in the zone. Under most usage failures here should be rare.
2034 # On failure, tack a note on to a warning string and continue without adding this record.
2035 # While we're at it, we substitute $zone for ZONE in the value.
2036 if ($val eq 'ZONE') {
2037 next if $revpatt; # If we've got a pattern, we skip the default record version.
2038##fixme? do we care if we have multiple whole-zone templates?
2039 $val = $zone->network;
2040 } elsif ($val =~ /ZONE/) {
2041 my $tmpval = $val;
2042 $tmpval =~ s/ZONE//;
2043 # Bend the rules and allow single-trailing-number PTR or PTR template records to be inserted
2044 # as either v4 or v6. May make this an off-by-default config flag
2045 # Note that the origin records that may trigger this **SHOULD** already have ZONE,\d
2046 if ($type == 12 || $type == 65282) {
2047 $tmpval =~ s/[,.]/::/ if ($tmpval =~ /^[,.]\d+$/ && $zone->{isv6});
2048 $tmpval =~ s/[,:]+/./ if ($tmpval =~ /^(?:,|::)\d+$/ && !$zone->{isv6});
2049 }
2050 my $addr;
2051 if (_ipparent($dbh, 'n', 'y', \$tmpval, $rdns_id, \$addr)) {
2052 $val = $addr->addr;
2053 } else {
2054 $warnstr .= "\nDefault record '$val $typemap{$type} $host' doesn't fit in $zone, skipping";
2055 next;
2056 }
2057 }
2058
2059 # Substitute $zone for ZONE in the hostname, but only for non-NS records.
2060 # NS records get this substitution on the value instead.
2061 $host = _ZONE($zone, $host) if $type != 2;
2062
2063 # Fill in the forward domain ID if we can find it, otherwise:
2064 # Coerce type down to PTR or PTR template if we can't
2065 my $domid = 0;
2066 if ($type >= 65280) {
2067 if (!($domid = _hostparent($dbh, $host))) {
2068 $warnstr .= "\nRecord added as PTR instead of $typemap{$type}; domain not found for $host";
2069 $type = $reverse_typemap{PTR};
2070 $domid = 0; # just to be explicit.
2071 }
2072 }
2073
2074 $sth_in->execute($domid,$host,$type,$val,$ttl);
2075
2076 if ($typemap{$type} eq 'SOA') {
2077 my @tmp1 = split /:/, $host;
2078 my @tmp2 = split /:/, $val;
2079 _log($dbh, (rdns_id => $rdns_id, group_id => $group,
2080 entry => "[new $zone] Added SOA record [contact $tmp1[0]] [master $tmp1[1]] ".
2081 "[refresh $tmp2[0]] [retry $tmp2[1]] [expire $tmp2[2]] [minttl $tmp2[3]], TTL $ttl"));
2082 $defttl = $tmp2[3];
2083 } else {
2084 my $logentry = "[new $zone] Added record '$host $typemap{$type}";
2085 _log($dbh, (rdns_id => $rdns_id, domain_id => $domid, group_id => $group,
2086 entry => $logentry." $val', TTL $ttl"));
2087 }
2088 }
2089
2090 # Generate record based on provided pattern.
2091 if ($revpatt) {
2092 my $host;
2093 my $type = ($zone->{isv6} ? 65284 : 65283);
2094 my $val = $zone->network;
2095
2096 # Substitute $zone for ZONE in the hostname.
2097 $host = _ZONE($zone, $revpatt);
2098
2099 my $domid = 0;
2100 if (!($domid = _hostparent($dbh, $host))) {
2101 $warnstr .= "\nDefault pattern added as PTR template instead of $typemap{$type}; domain not found for $host";
2102 $type = 65282;
2103 $domid = 0; # just to be explicit.
2104 }
2105
2106 $sth_in->execute($domid,$host,$type,$val,$defttl);
2107 my $logentry = "[new $zone] Added record '$host $typemap{$type}";
2108 _log($dbh, (rdns_id => $rdns_id, domain_id => $domid, group_id => $group,
2109 entry => $logentry." $val', TTL $defttl from pattern"));
2110 }
2111
2112 # If there are warnings (presumably about default records skipped for cause) log them
2113 _log($dbh, (rdns_id => $rdns_id, group_id => $group, entry => "Warning(s) adding $zone:$warnstr"))
2114 if $warnstr;
2115
2116 # once we get here, we should have suceeded.
2117 $dbh->commit;
2118 }; # end eval
2119
2120 if ($@) {
2121 my $msg = $@;
2122 eval { $dbh->rollback; };
2123 _log($dbh, (group_id => $group, entry => "Failed adding reverse zone $zone ($msg)"))
2124 if $config{log_failures};
2125 $dbh->commit; # since we enabled transactions earlier
2126 return ('FAIL',$msg);
2127 } else {
2128 my $retcode = 'OK';
2129 if ($warnstr) {
2130 $resultstr = $warnstr;
2131 $retcode = 'WARN';
2132 }
2133 return ($retcode, $rdns_id);
2134 }
2135
2136} # end addRDNS()
2137
2138
2139## DNSDB::getZoneCount
2140# Get count of zones in group or groups
2141# Takes a database handle and hash containing:
2142# - the "current" group
2143# - an array of "acceptable" groups
2144# - a flag for forward/reverse zones
2145# - Optionally accept a "starts with" and/or "contains" filter argument
2146# Returns an integer count of the resulting zone list.
2147sub getZoneCount {
2148 my $dbh = shift;
2149
2150 my %args = @_;
2151
2152 my @filterargs;
2153 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2154 push @filterargs, "^$args{startwith}" if $args{startwith};
2155 $args{filter} =~ s/\./\[\.\]/g if $args{filter}; # only match literal dots, usually in reverse zones
2156 push @filterargs, $args{filter} if $args{filter};
2157
2158 my $sql;
2159 # Not as compact, and fix-me-twice if the common bits get wrong, but much easier to read
2160 if ($args{revrec} eq 'n') {
2161 $sql = "SELECT count(*) FROM domains".
2162 " WHERE group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2163 ($args{startwith} ? " AND domain ~* ?" : '').
2164 ($args{filter} ? " AND domain ~* ?" : '');
2165 } else {
2166 $sql = "SELECT count(*) FROM revzones".
2167 " WHERE group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2168 ($args{startwith} ? " AND CAST(revnet AS VARCHAR) ~* ?" : '').
2169 ($args{filter} ? " AND CAST(revnet AS VARCHAR) ~* ?" : '');
2170 }
2171 my ($count) = $dbh->selectrow_array($sql, undef, @filterargs);
2172 return $count;
2173} # end getZoneCount()
2174
2175
2176## DNSDB::getZoneList()
2177# Get a list of zones in the specified group(s)
2178# Takes the same arguments as getZoneCount() above
2179# Returns a reference to an array of hashrefs suitable for feeding to HTML::Template
2180sub getZoneList {
2181 my $dbh = shift;
2182
2183 my %args = @_;
2184
2185 my @zonelist;
2186
2187 $args{sortorder} = 'ASC' if !grep /^$args{sortorder}$/, ('ASC','DESC');
2188 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
2189
2190 my @filterargs;
2191 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2192 push @filterargs, "^$args{startwith}" if $args{startwith};
2193 $args{filter} =~ s/\./\[\.\]/g if $args{filter}; # only match literal dots, usually in reverse zones
2194 push @filterargs, $args{filter} if $args{filter};
2195
2196 my $sql;
2197 # Not as compact, and fix-me-twice if the common bits get wrong, but much easier to read
2198 if ($args{revrec} eq 'n') {
2199 $args{sortby} = 'domain' if !grep /^$args{sortby}$/, ('domain','group','status');
2200 $sql = "SELECT domain_id,domain,status,groups.group_name AS group FROM domains".
2201 " INNER JOIN groups ON domains.group_id=groups.group_id".
2202 " WHERE domains.group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2203 ($args{startwith} ? " AND domain ~* ?" : '').
2204 ($args{filter} ? " AND domain ~* ?" : '');
2205 } else {
2206##fixme: arguably startwith here is irrelevant. depends on the UI though.
2207 $args{sortby} = 'revnet' if !grep /^$args{sortby}$/, ('revnet','group','status');
2208 $sql = "SELECT rdns_id,revnet,status,groups.group_name AS group FROM revzones".
2209 " INNER JOIN groups ON revzones.group_id=groups.group_id".
2210 " WHERE revzones.group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2211 ($args{startwith} ? " AND CAST(revnet AS VARCHAR) ~* ?" : '').
2212 ($args{filter} ? " AND CAST(revnet AS VARCHAR) ~* ?" : '');
2213 }
2214 # A common tail.
2215 $sql .= " ORDER BY ".($args{sortby} eq 'group' ? 'groups.group_name' : $args{sortby})." $args{sortorder} ".
2216 ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage}".
2217 " OFFSET ".$args{offset}*$config{perpage});
2218 my $sth = $dbh->prepare($sql);
2219 $sth->execute(@filterargs);
2220 my $rownum = 0;
2221
2222 while (my @data = $sth->fetchrow_array) {
2223 my %row;
2224 $row{domain_id} = $data[0];
2225 $row{domain} = $data[1];
2226 $row{status} = $data[2];
2227 $row{group} = $data[3];
2228 push @zonelist, \%row;
2229 }
2230
2231 return \@zonelist;
2232} # end getZoneList()
2233
2234
2235## DNSDB::getZoneLocation()
2236# Retrieve the default location for a zone.
2237# Takes a database handle, forward/reverse flag, and zone ID
2238sub getZoneLocation {
2239 my $dbh = shift;
2240 my $revrec = shift;
2241 my $zoneid = shift;
2242
2243 my ($loc) = $dbh->selectrow_array("SELECT default_location FROM ".
2244 ($revrec eq 'n' ? 'domains WHERE domain_id = ?' : 'revzones WHERE rdns_id = ?'),
2245 undef, ($zoneid));
2246 return $loc;
2247} # end getZoneLocation()
2248
2249
2250## DNSDB::addGroup()
2251# Add a group
2252# Takes a database handle, group name, parent group, hashref for permissions,
2253# and optional template-vs-cloneme flag for the default records
2254# Returns a status code and message
2255sub addGroup {
2256 $errstr = '';
2257 my $dbh = shift;
2258 my $groupname = shift;
2259 my $pargroup = shift;
2260 my $permissions = shift;
2261
2262 # 0 indicates "custom", hardcoded.
2263 # Any other value clones that group's default records, if it exists.
2264 my $inherit = shift || 0;
2265##fixme: need a flag to indicate clone records or <?> ?
2266
2267 # Allow transactions, and raise an exception on errors so we can catch it later.
2268 # Use local to make sure these get "reset" properly on exiting this block
2269 local $dbh->{AutoCommit} = 0;
2270 local $dbh->{RaiseError} = 1;
2271
2272 my ($group_id) = $dbh->selectrow_array("SELECT group_id FROM groups WHERE group_name=?", undef, ($groupname));
2273
2274 return ('FAIL', "Group already exists") if $group_id;
2275
2276 # Wrap all the SQL in a transaction
2277 eval {
2278 $dbh->do("INSERT INTO groups (parent_group_id,group_name) VALUES (?,?)", undef, ($pargroup, $groupname) );
2279
2280 my ($groupid) = $dbh->selectrow_array("SELECT currval('groups_group_id_seq')");
2281
2282 # We work through the whole set of permissions instead of specifying them so
2283 # that when we add a new permission, we don't have to change the code anywhere
2284 # that doesn't explicitly deal with that specific permission.
2285 my @permvals;
2286 foreach (@permtypes) {
2287 if (!defined ($permissions->{$_})) {
2288 push @permvals, 0;
2289 } else {
2290 push @permvals, $permissions->{$_};
2291 }
2292 }
2293 $dbh->do("INSERT INTO permissions (group_id,$permlist) values (?".',?'x($#permtypes+1).")",
2294 undef, ($groupid, @permvals) );
2295 my ($permid) = $dbh->selectrow_array("SELECT currval('permissions_permission_id_seq')");
2296 $dbh->do("UPDATE groups SET permission_id=$permid WHERE group_id=$groupid");
2297
2298 # Default records
2299 my $sthf = $dbh->prepare("INSERT INTO default_records (group_id,host,type,val,distance,weight,port,ttl) ".
2300 "VALUES ($groupid,?,?,?,?,?,?,?)");
2301 my $sthr = $dbh->prepare("INSERT INTO default_rev_records (group_id,host,type,val,ttl) ".
2302 "VALUES ($groupid,?,?,?,?)");
2303 if ($inherit) {
2304 # Duplicate records from parent. Actually relying on inherited records feels
2305 # very fragile, and it would be problematic to roll over at a later time.
2306 my $sth2 = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl FROM default_records WHERE group_id=?");
2307 $sth2->execute($pargroup);
2308 while (my @clonedata = $sth2->fetchrow_array) {
2309 $sthf->execute(@clonedata);
2310 }
2311 # And now the reverse records
2312 $sth2 = $dbh->prepare("SELECT host,type,val,ttl FROM default_rev_records WHERE group_id=?");
2313 $sth2->execute($pargroup);
2314 while (my @clonedata = $sth2->fetchrow_array) {
2315 $sthr->execute(@clonedata);
2316 }
2317 } else {
2318##fixme: Hardcoding is Bad, mmmmkaaaay?
2319 # reasonable basic defaults for SOA, MX, NS, and minimal hosting
2320 # could load from a config file, but somewhere along the line we need hardcoded bits.
2321 $sthf->execute('ns1.example.com:hostmaster.example.com', 6, '10800:3600:604800:10800', 0, 0, 0, 86400);
2322 $sthf->execute('DOMAIN', 1, '192.168.4.2', 0, 0, 0, 7200);
2323 $sthf->execute('DOMAIN', 15, 'mx.example.com', 10, 0, 0, 7200);
2324 $sthf->execute('DOMAIN', 2, 'ns1.example.com', 0, 0, 0, 7200);
2325 $sthf->execute('DOMAIN', 2, 'ns2.example.com', 0, 0, 0, 7200);
2326 $sthf->execute('www.DOMAIN', 5, 'DOMAIN', 0, 0, 0, 7200);
2327 # reasonable basic defaults for generic reverse zone. Same as initial SQL tabledef.
2328 $sthr->execute('hostmaster.ADMINDOMAIN:ns1.ADMINDOMAIN', 6, '10800:3600:604800:10800', 86400);
2329 $sthr->execute('unused-%r.ADMINDOMAIN', 65283, 'ZONE', 3600);
2330 }
2331
2332 _log($dbh, (group_id => $pargroup, entry => "Added group $groupname") );
2333
2334 # once we get here, we should have suceeded.
2335 $dbh->commit;
2336 }; # end eval
2337
2338 if ($@) {
2339 my $msg = $@;
2340 eval { $dbh->rollback; };
2341 if ($config{log_failures}) {
2342 _log($dbh, (group_id => $pargroup, entry => "Failed to add group $groupname: $msg") );
2343 $dbh->commit;
2344 }
2345 return ('FAIL',$msg);
2346 }
2347
2348 return ('OK','OK');
2349} # end addGroup()
2350
2351
2352## DNSDB::delGroup()
2353# Delete a group.
2354# Takes a group ID
2355# Returns a status code and message
2356sub delGroup {
2357 my $dbh = shift;
2358 my $groupid = shift;
2359
2360 # Allow transactions, and raise an exception on errors so we can catch it later.
2361 # Use local to make sure these get "reset" properly on exiting this block
2362 local $dbh->{AutoCommit} = 0;
2363 local $dbh->{RaiseError} = 1;
2364
2365##fixme: locate "knowable" error conditions and deal with them before the eval
2366# ... or inside, whatever.
2367# -> domains still exist in group
2368# -> ...
2369 my $failmsg = '';
2370 my $resultmsg = '';
2371
2372 # collect some pieces for logging and error messages
2373 my $groupname = groupName($dbh,$groupid);
2374 my $parid = parentID($dbh, (id => $groupid, type => 'group'));
2375
2376 # Wrap all the SQL in a transaction
2377 eval {
2378 # Check for Things in the group
2379 $failmsg = "Can't remove group $groupname";
2380 my ($grpcnt) = $dbh->selectrow_array("SELECT count(*) FROM groups WHERE parent_group_id=?", undef, ($groupid));
2381 die "$grpcnt groups still in group\n" if $grpcnt;
2382 my ($domcnt) = $dbh->selectrow_array("SELECT count(*) FROM domains WHERE group_id=?", undef, ($groupid));
2383 die "$domcnt domains still in group\n" if $domcnt;
2384 my ($usercnt) = $dbh->selectrow_array("SELECT count(*) FROM users WHERE group_id=?", undef, ($groupid));
2385 die "$usercnt users still in group\n" if $usercnt;
2386
2387 $failmsg = "Failed to delete default records for $groupname";
2388 $dbh->do("DELETE from default_records WHERE group_id=?", undef, ($groupid));
2389 $failmsg = "Failed to delete default reverse records for $groupname";
2390 $dbh->do("DELETE from default_rev_records WHERE group_id=?", undef, ($groupid));
2391 $failmsg = "Failed to remove group $groupname";
2392 $dbh->do("DELETE from groups WHERE group_id=?", undef, ($groupid));
2393
2394 _log($dbh, (group_id => $parid, entry => "Deleted group $groupname"));
2395 $resultmsg = "Deleted group $groupname";
2396
2397 # once we get here, we should have suceeded.
2398 $dbh->commit;
2399 }; # end eval
2400
2401 if ($@) {
2402 my $msg = $@;
2403 eval { $dbh->rollback; };
2404 if ($config{log_failures}) {
2405 _log($dbh, (group_id => $parid, entry => "$failmsg: $msg"));
2406 $dbh->commit; # since we enabled transactions earlier
2407 }
2408 return ('FAIL',"$failmsg: $msg");
2409 }
2410
2411 return ('OK',$resultmsg);
2412} # end delGroup()
2413
2414
2415## DNSDB::getChildren()
2416# Get a list of all groups whose parent^n is group <n>
2417# Takes a database handle, group ID, reference to an array to put the group IDs in,
2418# and an optional flag to return only immediate children or all children-of-children
2419# default to returning all children
2420# Calls itself
2421sub getChildren {
2422 $errstr = '';
2423 my $dbh = shift;
2424 my $rootgroup = shift;
2425 my $groupdest = shift;
2426 my $immed = shift || 'all';
2427
2428 # special break for default group; otherwise we get stuck.
2429 if ($rootgroup == 1) {
2430 # by definition, group 1 is the Root Of All Groups
2431 my $sth = $dbh->prepare("SELECT group_id FROM groups WHERE NOT (group_id=1)".
2432 ($immed ne 'all' ? " AND parent_group_id=1" : '')." ORDER BY group_name");
2433 $sth->execute;
2434 while (my @this = $sth->fetchrow_array) {
2435 push @$groupdest, @this;
2436 }
2437 } else {
2438 my $sth = $dbh->prepare("SELECT group_id FROM groups WHERE parent_group_id=? ORDER BY group_name");
2439 $sth->execute($rootgroup);
2440 return if $sth->rows == 0;
2441 my @grouplist;
2442 while (my ($group) = $sth->fetchrow_array) {
2443 push @$groupdest, $group;
2444 getChildren($dbh,$group,$groupdest) if $immed eq 'all';
2445 }
2446 }
2447} # end getChildren()
2448
2449
2450## DNSDB::groupName()
2451# Return the group name based on a group ID
2452# Takes a database handle and the group ID
2453# Returns the group name or undef on failure
2454sub groupName {
2455 $errstr = '';
2456 my $dbh = shift;
2457 my $groupid = shift;
2458 my $sth = $dbh->prepare("SELECT group_name FROM groups WHERE group_id=?");
2459 $sth->execute($groupid);
2460 my ($groupname) = $sth->fetchrow_array();
2461 $errstr = $DBI::errstr if !$groupname;
2462 return $groupname if $groupname;
2463} # end groupName
2464
2465
2466## DNSDB::getGroupCount()
2467# Get count of subgroups in group or groups
2468# Takes a database handle and hash containing:
2469# - the "current" group
2470# - an array of "acceptable" groups
2471# - Optionally accept a "starts with" and/or "contains" filter argument
2472# Returns an integer count of the resulting group list.
2473sub getGroupCount {
2474 my $dbh = shift;
2475
2476 my %args = @_;
2477
2478 my @filterargs;
2479
2480 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2481 push @filterargs, "^$args{startwith}" if $args{startwith};
2482 push @filterargs, $args{filter} if $args{filter};
2483
2484 my $sql = "SELECT count(*) FROM groups ".
2485 "WHERE parent_group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2486 ($args{startwith} ? " AND group_name ~* ?" : '').
2487 ($args{filter} ? " AND group_name ~* ?" : '');
2488 my ($count) = $dbh->selectrow_array($sql, undef, (@filterargs) );
2489 $errstr = $dbh->errstr if !$count;
2490 return $count;
2491} # end getGroupCount
2492
2493
2494## DNSDB::getGroupList()
2495# Get a list of sub^n-groups in the specified group(s)
2496# Takes the same arguments as getGroupCount() above
2497# Returns an arrayref containing hashrefs suitable for feeding straight to HTML::Template
2498sub getGroupList {
2499 my $dbh = shift;
2500
2501 my %args = @_;
2502
2503 my @filterargs;
2504
2505 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2506 push @filterargs, "^$args{startwith}" if $args{startwith};
2507 push @filterargs, $args{filter} if $args{filter};
2508
2509 # protection against bad or missing arguments
2510 $args{sortorder} = 'ASC' if !$args{sortorder};
2511 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
2512
2513 # munge sortby for columns in database
2514 $args{sortby} = 'g.group_name' if $args{sortby} eq 'group';
2515 $args{sortby} = 'g2.group_name' if $args{sortby} eq 'parent';
2516
2517 my $sql = q(SELECT g.group_id AS groupid, g.group_name AS groupname, g2.group_name AS pgroup
2518 FROM groups g
2519 INNER JOIN groups g2 ON g2.group_id=g.parent_group_id
2520 ).
2521 " WHERE g.parent_group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2522 ($args{startwith} ? " AND g.group_name ~* ?" : '').
2523 ($args{filter} ? " AND g.group_name ~* ?" : '').
2524 " GROUP BY g.group_id, g.group_name, g2.group_name ".
2525 " ORDER BY $args{sortby} $args{sortorder} ".
2526 ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage} OFFSET ".$args{offset}*$config{perpage});
2527 my $glist = $dbh->selectall_arrayref($sql, { Slice => {} }, (@filterargs) );
2528 $errstr = $dbh->errstr if !$glist;
2529
2530 # LEFT JOINs make the result set balloon beyond sanity just to include counts;
2531 # this means there's lots of crunching needed to trim the result set back down.
2532 # So instead we track the order of the groups, and push the counts into the
2533 # arrayref result separately.
2534##fixme: put this whole sub in a transaction? might be
2535# needed for accurate results on very busy systems.
2536##fixme: large group lists need prepared statements?
2537#my $ucsth = $dbh->prepare("SELECT count(*) FROM users WHERE group_id=?");
2538#my $dcsth = $dbh->prepare("SELECT count(*) FROM domains WHERE group_id=?");
2539#my $rcsth = $dbh->prepare("SELECT count(*) FROM revzones WHERE group_id=?");
2540 foreach (@{$glist}) {
2541 my ($ucnt) = $dbh->selectrow_array("SELECT count(*) FROM users WHERE group_id=?", undef, ($$_{groupid}));
2542 $$_{nusers} = $ucnt;
2543 my ($dcnt) = $dbh->selectrow_array("SELECT count(*) FROM domains WHERE group_id=?", undef, ($$_{groupid}));
2544 $$_{ndomains} = $dcnt;
2545 my ($rcnt) = $dbh->selectrow_array("SELECT count(*) FROM revzones WHERE group_id=?", undef, ($$_{groupid}));
2546 $$_{nrevzones} = $rcnt;
2547 }
2548
2549 return $glist;
2550} # end getGroupList
2551
2552
2553## DNSDB::groupID()
2554# Return the group ID based on the group name
2555# Takes a database handle and the group name
2556# Returns the group ID or undef on failure
2557sub groupID {
2558 $errstr = '';
2559 my $dbh = shift;
2560 my $group = shift;
2561 my ($grpid) = $dbh->selectrow_array("SELECT group_id FROM groups WHERE group_name=?", undef, ($group) );
2562 $errstr = $DBI::errstr if !$grpid;
2563 return $grpid if $grpid;
2564} # end groupID()
2565
2566
2567## DNSDB::addUser()
2568# Add a user.
2569# Takes a DB handle, username, group ID, password, state (active/inactive).
2570# Optionally accepts:
2571# user type (user/admin) - defaults to user
2572# permissions string - defaults to inherit from group
2573# three valid forms:
2574# i - Inherit permissions
2575# c:<user_id> - Clone permissions from <user_id>
2576# C:<permission list> - Set these specific permissions
2577# first name - defaults to username
2578# last name - defaults to blank
2579# phone - defaults to blank (could put other data within column def)
2580# Returns (OK,<uid>) on success, (FAIL,<message>) on failure
2581sub addUser {
2582 $errstr = '';
2583 my $dbh = shift;
2584 my $username = shift;
2585 my $group = shift;
2586 my $pass = shift;
2587 my $state = shift;
2588
2589 return ('FAIL', "Missing one or more required entries") if !defined($state);
2590 return ('FAIL', "Username must not be blank") if !$username;
2591
2592 # Munge in some alternate state values
2593 $state = 1 if $state =~ /^active$/;
2594 $state = 1 if $state =~ /^on$/;
2595 $state = 0 if $state =~ /^inactive$/;
2596 $state = 0 if $state =~ /^off$/;
2597
2598 my $type = shift || 'u'; # create limited users by default - fwiw, not sure yet how this will interact with ACLs
2599
2600 my $permstring = shift || 'i'; # default is to inhert permissions from group
2601
2602 my $fname = shift || $username;
2603 my $lname = shift || '';
2604 my $phone = shift || ''; # not going format-check
2605
2606 my $sth = $dbh->prepare("SELECT user_id FROM users WHERE username=?");
2607 my $user_id;
2608
2609# quick check to start to see if we've already got one
2610 $sth->execute($username);
2611 ($user_id) = $sth->fetchrow_array;
2612
2613 return ('FAIL', "User already exists") if $user_id;
2614
2615 # Allow transactions, and raise an exception on errors so we can catch it later.
2616 # Use local to make sure these get "reset" properly on exiting this block
2617 local $dbh->{AutoCommit} = 0;
2618 local $dbh->{RaiseError} = 1;
2619
2620 # Wrap all the SQL in a transaction
2621 eval {
2622 # insert the user... note we set inherited perms by default since
2623 # it's simple and cleans up some other bits of state
2624 my $sth = $dbh->prepare("INSERT INTO users ".
2625 "(group_id,username,password,firstname,lastname,phone,type,status,permission_id,inherit_perm) ".
2626 "VALUES (?,?,?,?,?,?,?,?,(SELECT permission_id FROM permissions WHERE group_id=?),'t')");
2627 $sth->execute($group,$username,unix_md5_crypt($pass),$fname,$lname,$phone,$type,$state,$group);
2628
2629 # get the ID...
2630 ($user_id) = $dbh->selectrow_array("SELECT currval('users_user_id_seq')");
2631
2632# Permissions! Gotta set'em all!
2633 die "Invalid permission string $permstring\n"
2634 if $permstring !~ /^(?:
2635 i # inherit
2636 |c:\d+ # clone
2637 # custom. no, the leading , is not a typo
2638 |C:(?:,(?:group|user|domain|record|location|self)_(?:edit|create|delete|locchg|view))*
2639 )$/x;
2640# bleh. I'd call another function to do my dirty work, but we're in the middle of a transaction already.
2641 if ($permstring ne 'i') {
2642 # for cloned or custom permissions, we have to create a new permissions entry.
2643 my $clonesrc = $group;
2644 if ($permstring =~ /^c:(\d+)/) { $clonesrc = $1; }
2645 $dbh->do("INSERT INTO permissions ($permlist,user_id) ".
2646 "SELECT $permlist,? FROM permissions WHERE permission_id=".
2647 "(SELECT permission_id FROM permissions WHERE ".($permstring =~ /^c:/ ? 'user' : 'group')."_id=?)",
2648 undef, ($user_id,$clonesrc) );
2649 $dbh->do("UPDATE users SET permission_id=".
2650 "(SELECT permission_id FROM permissions WHERE user_id=?) ".
2651 "WHERE user_id=?", undef, ($user_id, $user_id) );
2652 }
2653 if ($permstring =~ /^C:/) {
2654 # finally for custom permissions, we set the passed-in permissions (and unset
2655 # any that might have been brought in by the clone operation above)
2656 my ($permid) = $dbh->selectrow_array("SELECT permission_id FROM permissions WHERE user_id=?",
2657 undef, ($user_id) );
2658 foreach (@permtypes) {
2659 if ($permstring =~ /,$_/) {
2660 $dbh->do("UPDATE permissions SET $_='t' WHERE permission_id=?", undef, ($permid) );
2661 } else {
2662 $dbh->do("UPDATE permissions SET $_='f' WHERE permission_id=?", undef, ($permid) );
2663 }
2664 }
2665 }
2666
2667 $dbh->do("UPDATE users SET inherit_perm='n' WHERE user_id=?", undef, ($user_id) );
2668
2669##fixme: add another table to hold name/email for log table?
2670
2671 _log($dbh, (group_id => $group, entry => "Added user $username ($fname $lname)"));
2672 # once we get here, we should have suceeded.
2673 $dbh->commit;
2674 }; # end eval
2675
2676 if ($@) {
2677 my $msg = $@;
2678 eval { $dbh->rollback; };
2679 if ($config{log_failures}) {
2680 _log($dbh, (group_id => $group, entry => "Error adding user $username: $msg"));
2681 $dbh->commit; # since we enabled transactions earlier
2682 }
2683 return ('FAIL',"Error adding user $username: $msg");
2684 }
2685
2686 return ('OK',"User $username ($fname $lname) added");
2687} # end addUser
2688
2689
2690## DNSDB::getUserCount()
2691# Get count of users in group
2692# Takes a database handle and hash containing at least the current group, and optionally:
2693# - a reference list of secondary groups
2694# - a filter string
2695# - a "Starts with" string
2696sub getUserCount {
2697 my $dbh = shift;
2698
2699 my %args = @_;
2700
2701 my @filterargs;
2702
2703 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2704 push @filterargs, "^$args{startwith}" if $args{startwith};
2705 push @filterargs, $args{filter} if $args{filter};
2706
2707
2708 my $sql = "SELECT count(*) FROM users ".
2709 "WHERE group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2710 ($args{startwith} ? " AND username ~* ?" : '').
2711 ($args{filter} ? " AND username ~* ?" : '');
2712 my ($count) = $dbh->selectrow_array($sql, undef, (@filterargs) );
2713 $errstr = $dbh->errstr if !$count;
2714 return $count;
2715} # end getUserCount()
2716
2717
2718## DNSDB::getUserList()
2719# Get list of users
2720# Takes the same arguments as getUserCount() above, plus optional:
2721# - sort field
2722# - sort order
2723# - offset/return-all-everything flag (defaults to $perpage records)
2724sub getUserList {
2725 my $dbh = shift;
2726
2727 my %args = @_;
2728
2729 my @filterargs;
2730
2731 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
2732 push @filterargs, "^$args{startwith}" if $args{startwith};
2733 push @filterargs, $args{filter} if $args{filter};
2734
2735 # better to request sorts on "simple" names, but it means we need to map it to real columns
2736 my %sortmap = (user => 'u.username', type => 'u.type', group => 'g.group_name', status => 'u.status',
2737 fname => 'fname');
2738 $args{sortby} = $sortmap{$args{sortby}};
2739
2740 # protection against bad or missing arguments
2741 $args{sortorder} = 'ASC' if !$args{sortorder};
2742 $args{sortby} = 'u.username' if !$args{sortby};
2743 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
2744
2745 my $sql = "SELECT u.user_id, u.username, u.firstname || ' ' || u.lastname AS fname, u.type, g.group_name, u.status ".
2746 "FROM users u ".
2747 "INNER JOIN groups g ON u.group_id=g.group_id ".
2748 "WHERE u.group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
2749 ($args{startwith} ? " AND u.username ~* ?" : '').
2750 ($args{filter} ? " AND u.username ~* ?" : '').
2751 " AND NOT u.type = 'R' ".
2752 " ORDER BY $args{sortby} $args{sortorder} ".
2753 ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage} OFFSET ".$args{offset}*$config{perpage});
2754 my $ulist = $dbh->selectall_arrayref($sql, { Slice => {} }, (@filterargs) );
2755 $errstr = $dbh->errstr if !$ulist;
2756 return $ulist;
2757} # end getUserList()
2758
2759
2760## DNSDB::getUserDropdown()
2761# Get a list of usernames for use in a dropdown menu.
2762# Takes a database handle, current group, and optional "tag this as selected" flag.
2763# Returns a reference to a list of hashrefs suitable to feeding to HTML::Template
2764sub getUserDropdown {
2765 my $dbh = shift;
2766 my $grp = shift;
2767 my $sel = shift || 0;
2768
2769 my $sth = $dbh->prepare("SELECT username,user_id FROM users WHERE group_id=?");
2770 $sth->execute($grp);
2771
2772 my @userlist;
2773 while (my ($username,$uid) = $sth->fetchrow_array) {
2774 my %row = (
2775 username => $username,
2776 uid => $uid,
2777 selected => ($sel == $uid ? 1 : 0)
2778 );
2779 push @userlist, \%row;
2780 }
2781 return \@userlist;
2782} # end getUserDropdown()
2783
2784
2785## DNSDB::checkUser()
2786# Check user/pass combo on login
2787sub checkUser {
2788 my $dbh = shift;
2789 my $user = shift;
2790 my $inpass = shift;
2791
2792 my $sth = $dbh->prepare("SELECT user_id,group_id,password,firstname,lastname FROM users WHERE username=?");
2793 $sth->execute($user);
2794 my ($uid,$gid,$pass,$fname,$lname) = $sth->fetchrow_array;
2795 my $loginfailed = 1 if !defined($uid);
2796
2797 if ($pass =~ m|^\$1\$([A-Za-z0-9/.]+)\$|) {
2798 $loginfailed = 1 if $pass ne unix_md5_crypt($inpass,$1);
2799 } else {
2800 $loginfailed = 1 if $pass ne $inpass;
2801 }
2802
2803 # nnnngggg
2804 return ($uid, $gid);
2805} # end checkUser
2806
2807
2808## DNSDB:: updateUser()
2809# Update general data about user
2810sub updateUser {
2811 my $dbh = shift;
2812
2813##fixme: tweak calling convention so that we can update any given bit of data
2814 my $uid = shift;
2815 my $username = shift;
2816 my $group = shift;
2817 my $pass = shift;
2818 my $state = shift;
2819 my $type = shift || 'u';
2820 my $fname = shift || $username;
2821 my $lname = shift || '';
2822 my $phone = shift || ''; # not going format-check
2823
2824 my $resultmsg = '';
2825
2826 # Munge in some alternate state values
2827 $state = 1 if $state =~ /^active$/;
2828 $state = 1 if $state =~ /^on$/;
2829 $state = 0 if $state =~ /^inactive$/;
2830 $state = 0 if $state =~ /^off$/;
2831
2832 # Allow transactions, and raise an exception on errors so we can catch it later.
2833 # Use local to make sure these get "reset" properly on exiting this block
2834 local $dbh->{AutoCommit} = 0;
2835 local $dbh->{RaiseError} = 1;
2836
2837 my $sth;
2838
2839 # Password can be left blank; if so we assume there's one on file.
2840 # Actual blank passwords are bad, mm'kay?
2841 if (!$pass) {
2842 ($pass) = $dbh->selectrow_array("SELECT password FROM users WHERE user_id=?", undef, ($uid));
2843 } else {
2844 $pass = unix_md5_crypt($pass);
2845 }
2846
2847 eval {
2848 $dbh->do("UPDATE users SET username=?, password=?, firstname=?, lastname=?, phone=?, type=?, status=?".
2849 " WHERE user_id=?", undef, ($username, $pass, $fname, $lname, $phone, $type, $state, $uid));
2850 $resultmsg = "Updated user info for $username ($fname $lname)";
2851 _log($dbh, group_id => $group, entry => $resultmsg);
2852 $dbh->commit;
2853 };
2854 if ($@) {
2855 my $msg = $@;
2856 eval { $dbh->rollback; };
2857 if ($config{log_failures}) {
2858 _log($dbh, (group_id => $group, entry => "Error updating user $username: $msg"));
2859 $dbh->commit; # since we enabled transactions earlier
2860 }
2861 return ('FAIL',"Error updating user $username: $msg");
2862 }
2863
2864 return ('OK',$resultmsg);
2865} # end updateUser()
2866
2867
2868## DNSDB::delUser()
2869# Delete a user.
2870# Takes a database handle and user ID
2871# Returns a success/failure code and matching message
2872sub delUser {
2873 my $dbh = shift;
2874 my $userid = shift;
2875
2876 return ('FAIL',"Bad userid") if !defined($userid);
2877
2878 my $userdata = getUserData($dbh, $userid);
2879
2880 # Allow transactions, and raise an exception on errors so we can catch it later.
2881 # Use local to make sure these get "reset" properly on exiting this block
2882 local $dbh->{AutoCommit} = 0;
2883 local $dbh->{RaiseError} = 1;
2884
2885 eval {
2886 $dbh->do("DELETE FROM users WHERE user_id=?", undef, ($userid));
2887 _log($dbh, (group_id => $userdata->{group_id},
2888 entry => "Deleted user ID $userid/".$userdata->{username}.
2889 " (".$userdata->{firstname}." ".$userdata->{lastname}.")") );
2890 $dbh->commit;
2891 };
2892 if ($@) {
2893 my $msg = $@;
2894 eval { $dbh->rollback; };
2895 if ($config{log_failures}) {
2896 _log($dbh, (group_id => $userdata->{group_id}, entry => "Error deleting user ID ".
2897 "$userid/".$userdata->{username}.": $msg") );
2898 $dbh->commit;
2899 }
2900 return ('FAIL',"Error deleting user $userid/".$userdata->{username}.": $msg");
2901 }
2902
2903 return ('OK',"Deleted user ".$userdata->{username}." (".$userdata->{firstname}." ".$userdata->{lastname}.")");
2904} # end delUser
2905
2906
2907## DNSDB::userFullName()
2908# Return a pretty string!
2909# Takes a user_id and optional printf-ish string to indicate which pieces where:
2910# %u for the username
2911# %f for the first name
2912# %l for the last name
2913# All other text in the passed string will be left as-is.
2914##fixme: need a "smart" option too, so that missing/null/blank first/last names don't give funky output
2915sub userFullName {
2916 $errstr = '';
2917 my $dbh = shift;
2918 my $userid = shift;
2919 my $fullformat = shift || '%f %l (%u)';
2920 my $sth = $dbh->prepare("select username,firstname,lastname from users where user_id=?");
2921 $sth->execute($userid);
2922 my ($uname,$fname,$lname) = $sth->fetchrow_array();
2923 $errstr = $DBI::errstr if !$uname;
2924
2925 $fullformat =~ s/\%u/$uname/g;
2926 $fullformat =~ s/\%f/$fname/g;
2927 $fullformat =~ s/\%l/$lname/g;
2928
2929 return $fullformat;
2930} # end userFullName
2931
2932
2933## DNSDB::userStatus()
2934# Sets and/or returns a user's status
2935# Takes a database handle, user ID and optionally a status argument
2936# Returns undef on errors.
2937sub userStatus {
2938 my $dbh = shift;
2939 my $id = shift;
2940 my $newstatus = shift || 'mu';
2941
2942 return undef if $id !~ /^\d+$/;
2943
2944 my $userdata = getUserData($dbh, $id);
2945
2946 # Allow transactions, and raise an exception on errors so we can catch it later.
2947 # Use local to make sure these get "reset" properly on exiting this block
2948 local $dbh->{AutoCommit} = 0;
2949 local $dbh->{RaiseError} = 1;
2950
2951 if ($newstatus ne 'mu') {
2952 # ooo, fun! let's see what we were passed for status
2953 eval {
2954 $newstatus = 0 if $newstatus eq 'useroff';
2955 $newstatus = 1 if $newstatus eq 'useron';
2956 $dbh->do("UPDATE users SET status=? WHERE user_id=?", undef, ($newstatus, $id));
2957
2958 $resultstr = ($newstatus ? 'Enabled' : 'Disabled')." user ".$userdata->{username}.
2959 " (".$userdata->{firstname}." ".$userdata->{lastname}.")";
2960
2961 my %loghash;
2962 $loghash{group_id} = parentID($dbh, (id => $id, type => 'user'));
2963 $loghash{entry} = $resultstr;
2964 _log($dbh, %loghash);
2965
2966 $dbh->commit;
2967 };
2968 if ($@) {
2969 my $msg = $@;
2970 eval { $dbh->rollback; };
2971 $resultstr = '';
2972 $errstr = $msg;
2973##fixme: failure logging?
2974 return;
2975 }
2976 }
2977
2978 my ($status) = $dbh->selectrow_array("SELECT status FROM users WHERE user_id=?", undef, ($id));
2979 return $status;
2980} # end userStatus()
2981
2982
2983## DNSDB::getUserData()
2984# Get misc user data for display
2985sub getUserData {
2986 my $dbh = shift;
2987 my $uid = shift;
2988
2989 my $sth = $dbh->prepare("SELECT group_id,username,firstname,lastname,phone,type,status,inherit_perm ".
2990 "FROM users WHERE user_id=?");
2991 $sth->execute($uid);
2992 return $sth->fetchrow_hashref();
2993} # end getUserData()
2994
2995
2996## DNSDB::addLoc()
2997# Add a new location.
2998# Takes a database handle, group ID, short and long description, and a comma-separated
2999# list of IP addresses.
3000# Returns ('OK',<location>) on success, ('FAIL',<failmsg>) on failure
3001sub addLoc {
3002 my $dbh = shift;
3003 my $grp = shift;
3004 my $shdesc = shift;
3005 my $comments = shift;
3006 my $iplist = shift;
3007
3008 # $shdesc gets set to the generated location ID if possible, but these can be de-undefined here.
3009 $comments = '' if !$comments;
3010 $iplist = '' if !$iplist;
3011
3012 my $loc;
3013
3014 # Generate a location ID. This is, by spec, a two-character widget. We'll use [a-z][a-z]
3015 # for now; 676 locations should satisfy all but the largest of the huge networks.
3016 # Not sure whether these are case-sensitive, or what other rules might apply - in any case
3017 # the absolute maximum is 16K (256*256) since it's parsed by tinydns as a two-character field.
3018
3019# add just after "my $origloc = $loc;":
3020# # These expand the possible space from 26^2 to 52^2 [* note in testing only 2052 were achieved],
3021# # and wrap it around.
3022# # Yes, they skip a couple of possibles. No, I don't care.
3023# $loc = 'aA' if $loc eq 'zz';
3024# $loc = 'Aa' if $loc eq 'zZ';
3025# $loc = 'ZA' if $loc eq 'Zz';
3026# $loc = 'aa' if $loc eq 'ZZ';
3027
3028 # Allow transactions, and raise an exception on errors so we can catch it later.
3029 # Use local to make sure these get "reset" properly on exiting this block
3030 local $dbh->{AutoCommit} = 0;
3031 local $dbh->{RaiseError} = 1;
3032
3033##fixme: There is probably a far better way to do this. Sequential increments
3034# are marginally less stupid that pure random generation though, and the existence
3035# check makes sure we don't stomp on an imported one.
3036
3037 eval {
3038 # Get the "last" location. Note this is the only use for loc_id, because selecting on location Does Funky Things
3039 ($loc) = $dbh->selectrow_array("SELECT location FROM locations ORDER BY loc_id DESC LIMIT 1");
3040 ($loc) = ($loc =~ /^(..)/);
3041 my $origloc = $loc;
3042 # Make a change...
3043 $loc++;
3044 # ... and keep changing if it exists
3045 while ($dbh->selectrow_array("SELECT count(*) FROM locations WHERE location LIKE ?", undef, ($loc.'%'))) {
3046 $loc++;
3047 ($loc) = ($loc =~ /^(..)/);
3048 die "too many locations in use, can't add another one\n" if $loc eq $origloc;
3049##fixme: really need to handle this case faster somehow
3050#if $loc eq $origloc die "<thwap> bad admin: all locations used, your network is too fragmented";
3051 }
3052 # And now we should have a unique location. tinydns fundamentally limits the
3053 # number of these but there's no doc on what characters are valid.
3054 $shdesc = $loc if !$shdesc;
3055 $dbh->do("INSERT INTO locations (location, group_id, iplist, description, comments) VALUES (?,?,?,?,?)",
3056 undef, ($loc, $grp, $iplist, $shdesc, $comments) );
3057 _log($dbh, entry => "Added location ($shdesc, '$iplist')");
3058 $dbh->commit;
3059 };
3060 if ($@) {
3061 my $msg = $@;
3062 eval { $dbh->rollback; };
3063 if ($config{log_failures}) {
3064 $shdesc = $loc if !$shdesc;
3065 _log($dbh, (entry => "Failed adding location ($shdesc, '$iplist'): $msg"));
3066 $dbh->commit;
3067 }
3068 return ('FAIL',$msg);
3069 }
3070
3071 return ('OK',$loc);
3072} # end addLoc()
3073
3074
3075## DNSDB::updateLoc()
3076sub updateLoc {
3077 my $dbh = shift;
3078 my $loc = shift;
3079 my $grp = shift;
3080 my $shdesc = shift;
3081 my $comments = shift;
3082 my $iplist = shift;
3083
3084 $shdesc = '' if !$shdesc;
3085 $comments = '' if !$comments;
3086 $iplist = '' if !$iplist;
3087
3088 # Allow transactions, and raise an exception on errors so we can catch it later.
3089 # Use local to make sure these get "reset" properly on exiting this block
3090 local $dbh->{AutoCommit} = 0;
3091 local $dbh->{RaiseError} = 1;
3092
3093 my $oldloc = getLoc($dbh, $loc);
3094 my $okmsg = "Updated location (".$oldloc->{description}.", '".$oldloc->{iplist}."') to ($shdesc, '$iplist')";
3095
3096 eval {
3097 $dbh->do("UPDATE locations SET group_id=?,iplist=?,description=?,comments=? WHERE location=?",
3098 undef, ($grp, $iplist, $shdesc, $comments, $loc) );
3099 _log($dbh, entry => $okmsg);
3100 $dbh->commit;
3101 };
3102 if ($@) {
3103 my $msg = $@;
3104 eval { $dbh->rollback; };
3105 if ($config{log_failures}) {
3106 $shdesc = $loc if !$shdesc;
3107 _log($dbh, (entry => "Failed updating location ($shdesc, '$iplist'): $msg"));
3108 $dbh->commit;
3109 }
3110 return ('FAIL',$msg);
3111 }
3112
3113 return ('OK',$okmsg);
3114} # end updateLoc()
3115
3116
3117## DNSDB::delLoc()
3118sub delLoc {}
3119
3120
3121## DNSDB::getLoc()
3122sub getLoc {
3123 my $dbh = shift;
3124 my $loc = shift;
3125
3126 my $sth = $dbh->prepare("SELECT group_id,iplist,description,comments FROM locations WHERE location=?");
3127 $sth->execute($loc);
3128 return $sth->fetchrow_hashref();
3129} # end getLoc()
3130
3131
3132## DNSDB::getLocCount()
3133# Get count of locations/views
3134# Takes a database handle and hash containing at least the current group, and optionally:
3135# - a reference list of secondary groups
3136# - a filter string
3137# - a "Starts with" string
3138sub getLocCount {
3139 my $dbh = shift;
3140
3141 my %args = @_;
3142
3143 my @filterargs;
3144
3145 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
3146 push @filterargs, "^$args{startwith}" if $args{startwith};
3147 push @filterargs, $args{filter} if $args{filter};
3148
3149
3150 my $sql = "SELECT count(*) FROM locations ".
3151 "WHERE group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
3152 ($args{startwith} ? " AND description ~* ?" : '').
3153 ($args{filter} ? " AND description ~* ?" : '');
3154 my ($count) = $dbh->selectrow_array($sql, undef, (@filterargs) );
3155 $errstr = $dbh->errstr if !$count;
3156 return $count;
3157} # end getLocCount()
3158
3159
3160## DNSDB::getLocList()
3161sub getLocList {
3162 my $dbh = shift;
3163
3164 my %args = @_;
3165
3166 my @filterargs;
3167
3168 $args{startwith} = undef if $args{startwith} && $args{startwith} !~ /^(?:[a-z]|0-9)$/;
3169 push @filterargs, "^$args{startwith}" if $args{startwith};
3170 push @filterargs, $args{filter} if $args{filter};
3171
3172 # better to request sorts on "simple" names, but it means we need to map it to real columns
3173# my %sortmap = (user => 'u.username', type => 'u.type', group => 'g.group_name', status => 'u.status',
3174# fname => 'fname');
3175# $args{sortby} = $sortmap{$args{sortby}};
3176
3177 # protection against bad or missing arguments
3178 $args{sortorder} = 'ASC' if !$args{sortorder};
3179 $args{sortby} = 'l.description' if !$args{sortby};
3180 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
3181
3182 my $sql = "SELECT l.location, l.description, l.iplist, g.group_name ".
3183 "FROM locations l ".
3184 "INNER JOIN groups g ON l.group_id=g.group_id ".
3185 "WHERE l.group_id IN ($args{curgroup}".($args{childlist} ? ",$args{childlist}" : '').")".
3186 ($args{startwith} ? " AND l.description ~* ?" : '').
3187 ($args{filter} ? " AND l.description ~* ?" : '').
3188 " ORDER BY $args{sortby} $args{sortorder} ".
3189 ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage} OFFSET ".$args{offset}*$config{perpage});
3190 my $ulist = $dbh->selectall_arrayref($sql, { Slice => {} }, (@filterargs) );
3191 $errstr = $dbh->errstr if !$ulist;
3192 return $ulist;
3193} # end getLocList()
3194
3195
3196## DNSDB::getLocDropdown()
3197# Get a list of location names for use in a dropdown menu.
3198# Takes a database handle, current group, and optional "tag this as selected" flag.
3199# Returns a reference to a list of hashrefs suitable to feeding to HTML::Template
3200sub getLocDropdown {
3201 my $dbh = shift;
3202 my $grp = shift;
3203 my $sel = shift || '';
3204
3205 my $sth = $dbh->prepare(qq(
3206 SELECT description,location FROM locations
3207 WHERE group_id=?
3208 ORDER BY description
3209 ) );
3210 $sth->execute($grp);
3211
3212 my @loclist;
3213 push @loclist, { locname => "(None/public)", loc => '', selected => ($sel ? 0 : ($sel eq '' ? 1 : 0)) };
3214 while (my ($locname, $loc) = $sth->fetchrow_array) {
3215 my %row = (
3216 locname => $locname,
3217 loc => $loc,
3218 selected => ($sel eq $loc ? 1 : 0)
3219 );
3220 push @loclist, \%row;
3221 }
3222 return \@loclist;
3223} # end getLocDropdown()
3224
3225
3226## DNSDB::getSOA()
3227# Return all suitable fields from an SOA record in separate elements of a hash
3228# Takes a database handle, default/live flag, domain/reverse flag, and parent ID
3229sub getSOA {
3230 $errstr = '';
3231 my $dbh = shift;
3232 my $def = shift;
3233 my $rev = shift;
3234 my $id = shift;
3235
3236 # (ab)use distance and weight columns to store SOA data? can't for default_rev_records...
3237 # - should really attach serial to the zone parent somewhere
3238
3239 my $sql = "SELECT record_id,host,val,ttl from "._rectable($def,$rev).
3240 " WHERE "._recparent($def,$rev)." = ? AND type=$reverse_typemap{SOA}";
3241 my $ret = $dbh->selectrow_hashref($sql, undef, ($id) );
3242 return if !$ret;
3243##fixme: stick a flag somewhere if the record doesn't exist. by the API, this is an impossible case, but...
3244
3245 ($ret->{contact},$ret->{prins}) = split /:/, $ret->{host};
3246 delete $ret->{host};
3247 ($ret->{refresh},$ret->{retry},$ret->{expire},$ret->{minttl}) = split /:/, $ret->{val};
3248 delete $ret->{val};
3249
3250 return $ret;
3251} # end getSOA()
3252
3253
3254## DNSDB::updateSOA()
3255# Update the specified SOA record
3256# Takes a database handle, default/live flag, forward/reverse flag, and SOA data hash
3257# Returns a two-element list with a result code and message
3258sub updateSOA {
3259 my $dbh = shift;
3260 my $defrec = shift;
3261 my $revrec = shift;
3262
3263 my %soa = @_;
3264
3265 my $oldsoa = getSOA($dbh, $defrec, $revrec, $soa{id});
3266
3267 my $msg;
3268 my %logdata;
3269 if ($defrec eq 'n') {
3270 $logdata{domain_id} = $soa{id} if $revrec eq 'n';
3271 $logdata{rdns_id} = $soa{id} if $revrec eq 'y';
3272 $logdata{group_id} = parentID($dbh, (id => $soa{id}, revrec => $revrec,
3273 type => ($revrec eq 'n' ? 'domain' : 'revzone') ) );
3274 } else {
3275 $logdata{group_id} = $soa{id};
3276 }
3277 my $parname = ($defrec eq 'y' ? groupName($dbh, $soa{id}) :
3278 ($revrec eq 'n' ? domainName($dbh, $soa{id}) : revName($dbh, $soa{id})) );
3279
3280 # Allow transactions, and raise an exception on errors so we can catch it later.
3281 # Use local to make sure these get "reset" properly on exiting this block
3282 local $dbh->{AutoCommit} = 0;
3283 local $dbh->{RaiseError} = 1;
3284
3285 eval {
3286 my $sql = "UPDATE "._rectable($defrec, $revrec)." SET host=?, val=?, ttl=? WHERE record_id=? AND type=6";
3287 $dbh->do($sql, undef, ("$soa{contact}:$soa{prins}", "$soa{refresh}:$soa{retry}:$soa{expire}:$soa{minttl}",
3288 $soa{ttl}, $oldsoa->{record_id}) );
3289 $msg = "Updated ".($defrec eq 'y' ? ($revrec eq 'y' ? 'default reverse ' : 'default ') : '').
3290 "SOA for $parname: ".
3291 "(ns $oldsoa->{prins}, contact $oldsoa->{contact}, refresh $oldsoa->{refresh},".
3292 " retry $oldsoa->{retry}, expire $oldsoa->{expire}, minTTL $oldsoa->{minttl}, TTL $oldsoa->{ttl}) to ".
3293 "(ns $soa{prins}, contact $soa{contact}, refresh $soa{refresh},".
3294 " retry $soa{retry}, expire $soa{expire}, minTTL $soa{minttl}, TTL $soa{ttl})";
3295
3296 $logdata{entry} = $msg;
3297 _log($dbh, %logdata);
3298
3299 $dbh->commit;
3300 };
3301 if ($@) {
3302 $msg = $@;
3303 eval { $dbh->rollback; };
3304 $logdata{entry} = "Error updating ".($defrec eq 'y' ? ($revrec eq 'y' ? 'default reverse zone ' : 'default ') : '').
3305 "SOA record for $parname: $msg";
3306 if ($config{log_failures}) {
3307 _log($dbh, %logdata);
3308 $dbh->commit;
3309 }
3310 return ('FAIL', $logdata{entry});
3311 } else {
3312 return ('OK', $msg);
3313 }
3314} # end updateSOA()
3315
3316
3317## DNSDB::getRecLine()
3318# Return all data fields for a zone record in separate elements of a hash
3319# Takes a database handle, default/live flag, forward/reverse flag, and record ID
3320sub getRecLine {
3321 $errstr = '';
3322 my $dbh = shift;
3323 my $defrec = shift;
3324 my $revrec = shift;
3325 my $id = shift;
3326
3327 my $sql = "SELECT record_id,host,type,val,ttl,location".($revrec eq 'n' ? ',distance,weight,port' : '').
3328 (($defrec eq 'y') ? ',group_id FROM ' : ',domain_id,rdns_id FROM ').
3329 _rectable($defrec,$revrec)." WHERE record_id=?";
3330 my $ret = $dbh->selectrow_hashref($sql, undef, ($id) );
3331
3332 if ($dbh->err) {
3333 $errstr = $DBI::errstr;
3334 return undef;
3335 }
3336
3337 if (!$ret) {
3338 $errstr = "No such record";
3339 return undef;
3340 }
3341
3342 # explicitly set a parent id
3343 if ($defrec eq 'y') {
3344 $ret->{parid} = $ret->{group_id};
3345 } else {
3346 $ret->{parid} = (($revrec eq 'n') ? $ret->{domain_id} : $ret->{rdns_id});
3347 # and a secondary if we have a custom type that lives in both a forward and reverse zone
3348 $ret->{secid} = (($revrec eq 'y') ? $ret->{domain_id} : $ret->{rdns_id}) if $ret->{type} > 65279;
3349 }
3350
3351 return $ret;
3352}
3353
3354
3355##fixme: should use above (getRecLine()) to get lines for below?
3356## DNSDB::getDomRecs()
3357# Return records for a domain
3358# Takes a database handle, default/live flag, group/domain ID, start,
3359# number of records, sort field, and sort order
3360# Returns a reference to an array of hashes
3361sub getDomRecs {
3362 $errstr = '';
3363 my $dbh = shift;
3364
3365 my %args = @_;
3366
3367 my @filterargs;
3368
3369 push @filterargs, $args{filter} if $args{filter};
3370
3371 # protection against bad or missing arguments
3372 $args{sortorder} = 'ASC' if !$args{sortorder};
3373 $args{sortby} = 'host' if !$args{sortby} && $args{revrec} eq 'n'; # default sort by host on domain record list
3374 $args{sortby} = 'val' if !$args{sortby} && $args{revrec} eq 'y'; # default sort by IP on revzone record list
3375 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
3376
3377 # sort reverse zones on IP, correctly
3378 # do other fiddling with $args{sortby} while we're at it.
3379 $args{sortby} = "r.$args{sortby}";
3380 $args{sortby} = 'CAST (r.val AS inet)' if $args{revrec} eq 'y' && $args{sortby} eq 'r.val';
3381 $args{sortby} = 't.alphaorder' if $args{sortby} eq 'r.type';
3382
3383 my $sql = "SELECT r.record_id,r.host,r.type,r.val,r.ttl";
3384 $sql .= ",l.description AS locname" if $args{defrec} eq 'n';
3385 $sql .= ",r.distance,r.weight,r.port" if $args{revrec} eq 'n';
3386 $sql .= " FROM "._rectable($args{defrec},$args{revrec})." r ";
3387 $sql .= "INNER JOIN rectypes t ON r.type=t.val "; # for sorting by type alphabetically
3388 $sql .= "LEFT JOIN locations l ON r.location=l.location " if $args{defrec} eq 'n';
3389 $sql .= "WHERE "._recparent($args{defrec},$args{revrec})." = ?";
3390 $sql .= " AND NOT r.type=$reverse_typemap{SOA}";
3391 $sql .= " AND host ~* ?" if $args{filter};
3392 $sql .= " ORDER BY $args{sortby} $args{sortorder}";
3393 # ensure consistent ordering by sorting on record_id too
3394 $sql .= ", record_id $args{sortorder}";
3395 $sql .= ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage} OFFSET ".$args{offset}*$config{perpage});
3396
3397 my @bindvars = ($args{id});
3398 push @bindvars, $args{filter} if $args{filter};
3399
3400 my $ret = $dbh->selectall_arrayref($sql, { Slice => {} }, (@bindvars) );
3401 return $ret;
3402} # end getDomRecs()
3403
3404
3405## DNSDB::getRecCount()
3406# Return count of non-SOA records in zone (or default records in a group)
3407# Takes a database handle, default/live flag, reverse/forward flag, group/domain ID,
3408# and optional filtering modifier
3409# Returns the count
3410sub getRecCount {
3411 my $dbh = shift;
3412 my $defrec = shift;
3413 my $revrec = shift;
3414 my $id = shift;
3415 my $filter = shift || '';
3416
3417 # keep the nasties down, since we can't ?-sub this bit. :/
3418 # note this is chars allowed in DNS hostnames
3419 $filter =~ s/[^a-zA-Z0-9_.:-]//g;
3420
3421 my @bindvars = ($id);
3422 push @bindvars, $filter if $filter;
3423 my $sql = "SELECT count(*) FROM ".
3424 _rectable($defrec,$revrec).
3425 " WHERE "._recparent($defrec,$revrec)."=? ".
3426 "AND NOT type=$reverse_typemap{SOA}".
3427 ($filter ? " AND host ~* ?" : '');
3428 my ($count) = $dbh->selectrow_array($sql, undef, (@bindvars) );
3429
3430 return $count;
3431
3432} # end getRecCount()
3433
3434
3435## DNSDB::addRec()
3436# Add a new record to a domain or a group's default records
3437# Takes a database handle, default/live flag, group/domain ID,
3438# host, type, value, and TTL
3439# Some types require additional detail: "distance" for MX and SRV,
3440# and weight/port for SRV
3441# Returns a status code and detail message in case of error
3442##fixme: pass a hash with the record data, not a series of separate values
3443sub addRec {
3444 $errstr = '';
3445 my $dbh = shift;
3446 my $defrec = shift;
3447 my $revrec = shift;
3448 my $id = shift; # parent (group_id for defrecs, rdns_id for reverse records,
3449 # domain_id for domain records)
3450
3451 my $host = shift;
3452 my $rectype = shift; # reference so we can coerce it if "+"-types can't find both zones
3453 my $val = shift;
3454 my $ttl = shift;
3455 my $location = shift;
3456 $location = '' if !$location;
3457
3458 # prep for validation
3459 my $addr = NetAddr::IP->new($$val);
3460 $$host =~ s/\.+$//; # FQDNs ending in . are an internal detail, and really shouldn't be exposed in the UI.
3461
3462 my $domid = 0;
3463 my $revid = 0;
3464
3465 my $retcode = 'OK'; # assume everything will go OK
3466 my $retmsg = '';
3467
3468 # do simple validation first
3469 return ('FAIL', "TTL must be numeric") unless $ttl =~ /^\d+$/;
3470
3471 # Quick check on hostname parts. Note the regex is more forgiving than the error message;
3472 # domain names technically are case-insensitive, and we use printf-like % codes for a couple
3473 # of types. Other things may also be added to validate default records of several flavours.
3474 return ('FAIL', "Hostnames may not contain anything other than (0-9 a-z . _)")
3475 if $defrec eq 'n' && ($revrec eq 'y' ? $$rectype != $reverse_typemap{TXT} : 1) &&
3476 $$host !~ /^[0-9a-z_%.-]+$/i;
3477
3478 # Collect these even if we're only doing a simple A record so we can call *any* validation sub
3479 my $dist = shift;
3480 my $weight = shift;
3481 my $port = shift;
3482
3483 my $fields;
3484 my @vallist;
3485
3486 # Call the validation sub for the type requested.
3487 ($retcode,$retmsg) = $validators{$$rectype}($dbh, (defrec => $defrec, revrec => $revrec, id => $id,
3488 host => $host, rectype => $rectype, val => $val, addr => $addr,
3489 dist => \$dist, port => \$port, weight => \$weight,
3490 fields => \$fields, vallist => \@vallist) );
3491
3492 return ($retcode,$retmsg) if $retcode eq 'FAIL';
3493
3494 # Set up database fields and bind parameters
3495 $fields .= "host,type,val,ttl,location,"._recparent($defrec,$revrec);
3496 push @vallist, ($$host,$$rectype,$$val,$ttl,$location,$id);
3497 my $vallen = '?'.(',?'x$#vallist);
3498
3499 # Put together the success log entry. We have to use this horrible kludge
3500 # because domain_id and rdns_id may or may not be present, and if they are,
3501 # they're not at a guaranteed consistent index in the array. wheee!
3502 my %logdata;
3503 my @ftmp = split /,/, $fields;
3504 for (my $i=0; $i <= $#vallist; $i++) {
3505 $logdata{domain_id} = $vallist[$i] if $ftmp[$i] eq 'domain_id';
3506 $logdata{rdns_id} = $vallist[$i] if $ftmp[$i] eq 'rdns_id';
3507 }
3508 $logdata{group_id} = $id if $defrec eq 'y';
3509 $logdata{group_id} = parentID($dbh,
3510 (id => $id, type => ($revrec eq 'n' ? 'domain' : 'revzone'), revrec => $revrec) )
3511 if $defrec eq 'n';
3512 $logdata{entry} = "Added ".($defrec eq 'y' ? 'default record' : 'record');
3513 # NS records for revzones get special treatment
3514 if ($revrec eq 'y' && $$rectype == 2) {
3515 $logdata{entry} .= " '$$val $typemap{$$rectype} $$host";
3516 } else {
3517 $logdata{entry} .= " '$$host $typemap{$$rectype} $$val";
3518 }
3519
3520 $logdata{entry} .= " [distance $dist]" if $typemap{$$rectype} eq 'MX';
3521 $logdata{entry} .= " [priority $dist] [weight $weight] [port $port]"
3522 if $typemap{$$rectype} eq 'SRV';
3523 $logdata{entry} .= "', TTL $ttl, location $location";
3524
3525 # Allow transactions, and raise an exception on errors so we can catch it later.
3526 # Use local to make sure these get "reset" properly on exiting this block
3527 local $dbh->{AutoCommit} = 0;
3528 local $dbh->{RaiseError} = 1;
3529
3530 eval {
3531 $dbh->do("INSERT INTO "._rectable($defrec, $revrec)." ($fields) VALUES ($vallen)",
3532 undef, @vallist);
3533 _log($dbh, %logdata);
3534 $dbh->commit;
3535 };
3536 if ($@) {
3537 my $msg = $@;
3538 eval { $dbh->rollback; };
3539 if ($config{log_failures}) {
3540 $logdata{entry} = "Failed adding ".($defrec eq 'y' ? 'default ' : '').
3541 "record '$$host $typemap{$$rectype} $$val', TTL $ttl ($msg)";
3542 _log($dbh, %logdata);
3543 $dbh->commit;
3544 }
3545 return ('FAIL',$msg);
3546 }
3547
3548 $resultstr = $logdata{entry};
3549 return ($retcode, $retmsg);
3550
3551} # end addRec()
3552
3553
3554## DNSDB::updateRec()
3555# Update a record
3556# Takes a database handle, default and reverse flags, record ID, immediate parent ID, and new record data.
3557# Returns a status code and message
3558sub updateRec {
3559 $errstr = '';
3560
3561 my $dbh = shift;
3562 my $defrec = shift;
3563 my $revrec = shift;
3564 my $id = shift;
3565 my $parid = shift; # immediate parent entity that we're descending from to update the record
3566
3567 # all records have these
3568 my $host = shift;
3569 my $hostbk = $$host; # Keep a backup copy of the original, so we can WARN if the update mangles the domain
3570 my $rectype = shift;
3571 my $val = shift;
3572 my $ttl = shift;
3573 my $location = shift; # may be empty/null/undef depending on caller
3574 $location = '' if !$location;
3575
3576 # prep for validation
3577 my $addr = NetAddr::IP->new($$val);
3578 $$host =~ s/\.+$//; # FQDNs ending in . are an internal detail, and really shouldn't be exposed in the UI.
3579
3580 my $domid = 0;
3581 my $revid = 0;
3582
3583 my $retcode = 'OK'; # assume everything will go OK
3584 my $retmsg = '';
3585
3586 # do simple validation first
3587 return ('FAIL', "TTL must be numeric") unless $ttl =~ /^\d+$/;
3588
3589 # Quick check on hostname parts. Note the regex is more forgiving than the error message;
3590 # domain names technically are case-insensitive, and we use printf-like % codes for a couple
3591 # of types. Other things may also be added to validate default records of several flavours.
3592 return ('FAIL', "Hostnames may not contain anything other than (0-9 a-z - . _)")
3593 if $defrec eq 'n' && ($revrec eq 'y' ? $$rectype != $reverse_typemap{TXT} : 1) &&
3594 $$host !~ /^[0-9a-z_%.-]+$/i;
3595
3596 # only MX and SRV will use these
3597 my $dist = shift || 0;
3598 my $weight = shift || 0;
3599 my $port = shift || 0;
3600
3601 my $fields;
3602 my @vallist;
3603
3604 # get old record data so we have the right parent ID
3605 # and for logging (eventually)
3606 my $oldrec = getRecLine($dbh, $defrec, $revrec, $id);
3607
3608 # Call the validation sub for the type requested.
3609 # Note the ID to pass here is the *parent*, not the record
3610 ($retcode,$retmsg) = $validators{$$rectype}($dbh, (defrec => $defrec, revrec => $revrec,
3611 id => ($defrec eq 'y' ? $oldrec->{group_id} : ($revrec eq 'n' ? $oldrec->{domain_id} : $oldrec->{rdns_id})),
3612 host => $host, rectype => $rectype, val => $val, addr => $addr,
3613 dist => \$dist, port => \$port, weight => \$weight,
3614 fields => \$fields, vallist => \@vallist,
3615 update => $id) );
3616
3617 return ($retcode,$retmsg) if $retcode eq 'FAIL';
3618
3619 # Set up database fields and bind parameters. Note only the optional fields
3620 # (distance, weight, port, secondary parent ID) are added in the validation call above
3621 $fields .= "host,type,val,ttl,location,"._recparent($defrec,$revrec);
3622 push @vallist, ($$host,$$rectype,$$val,$ttl,$location,
3623 ($defrec eq 'y' ? $oldrec->{group_id} : ($revrec eq 'n' ? $oldrec->{domain_id} : $oldrec->{rdns_id})) );
3624
3625 # hack hack PTHUI
3626 # need to forcibly make sure we disassociate a record with a parent it's no longer related to.
3627 # eg, PTR records may not have a domain parent, or A/AAAA records may not have a revzone parent.
3628 # mainly needed for crossover types that got coerced down to "standard" types
3629 if ($defrec eq 'n') {
3630 if ($$rectype == $reverse_typemap{PTR}) {
3631 $fields .= ",domain_id";
3632 push @vallist, 0;
3633 }
3634 if ($$rectype == $reverse_typemap{A} || $$rectype == $reverse_typemap{AAAA}) {
3635 $fields .= ",rdns_id";
3636 push @vallist, 0;
3637 }
3638 }
3639 # fix fat-finger-originated record type changes
3640 if ($$rectype == 65285) {
3641 $fields .= ",rdns_id" if $revrec eq 'n';
3642 $fields .= ",domain_id" if $revrec eq 'y';
3643 push @vallist, 0;
3644 }
3645 if ($defrec eq 'n') {
3646 $domid = $parid if $revrec eq 'n';
3647 $revid = $parid if $revrec eq 'y';
3648 }
3649
3650 # Put together the success log entry. Horrible kludge from addRec() copied as-is since
3651 # we don't know whether the passed arguments or retrieved values for domain_id and rdns_id
3652 # will be maintained (due to "not-in-zone" validation changes)
3653 my %logdata;
3654 $logdata{domain_id} = $domid;
3655 $logdata{rdns_id} = $revid;
3656 my @ftmp = split /,/, $fields;
3657 for (my $i=0; $i <= $#vallist; $i++) {
3658 $logdata{domain_id} = $vallist[$i] if $ftmp[$i] eq 'domain_id';
3659 $logdata{rdns_id} = $vallist[$i] if $ftmp[$i] eq 'rdns_id';
3660 }
3661 $logdata{group_id} = $parid if $defrec eq 'y';
3662 $logdata{group_id} = parentID($dbh,
3663 (id => $parid, type => ($revrec eq 'n' ? 'domain' : 'revzone'), revrec => $revrec) )
3664 if $defrec eq 'n';
3665 $logdata{entry} = "Updated ".($defrec eq 'y' ? 'default record' : 'record')." from\n";
3666 # NS records for revzones get special treatment
3667 if ($revrec eq 'y' && $$rectype == 2) {
3668 $logdata{entry} .= " '$oldrec->{val} $typemap{$oldrec->{type}} $oldrec->{host}";
3669 } else {
3670 $logdata{entry} .= " '$oldrec->{host} $typemap{$oldrec->{type}} $oldrec->{val}";
3671 }
3672 $logdata{entry} .= " [distance $oldrec->{distance}]" if $typemap{$oldrec->{type}} eq 'MX';
3673 $logdata{entry} .= " [priority $oldrec->{distance}] [weight $oldrec->{weight}] [port $oldrec->{port}]"
3674 if $typemap{$oldrec->{type}} eq 'SRV';
3675 $logdata{entry} .= "', TTL $oldrec->{ttl}, location $oldrec->{location}\nto\n";
3676 # More NS special
3677 if ($revrec eq 'y' && $$rectype == 2) {
3678 $logdata{entry} .= "'$$val $typemap{$$rectype} $$host";
3679 } else {
3680 $logdata{entry} .= "'$$host $typemap{$$rectype} $$val";
3681 }
3682 $logdata{entry} .= " [distance $dist]" if $typemap{$$rectype} eq 'MX';
3683 $logdata{entry} .= " [priority $dist] [weight $weight] [port $port]" if $typemap{$$rectype} eq 'SRV';
3684 $logdata{entry} .= "', TTL $ttl, location $location";
3685
3686 local $dbh->{AutoCommit} = 0;
3687 local $dbh->{RaiseError} = 1;
3688
3689 # Fiddle the field list into something suitable for updates
3690 $fields =~ s/,/=?,/g;
3691 $fields .= "=?";
3692
3693 eval {
3694 $dbh->do("UPDATE "._rectable($defrec,$revrec)." SET $fields WHERE record_id=?", undef, (@vallist, $id) );
3695 _log($dbh, %logdata);
3696 $dbh->commit;
3697 };
3698 if ($@) {
3699 my $msg = $@;
3700 eval { $dbh->rollback; };
3701 if ($config{log_failures}) {
3702 $logdata{entry} = "Failed updating ".($defrec eq 'y' ? 'default ' : '').
3703 "record '$oldrec->{host} $typemap{$oldrec->{type}} $oldrec->{val}', TTL $oldrec->{ttl} ($msg)";
3704 _log($dbh, %logdata);
3705 $dbh->commit;
3706 }
3707 return ('FAIL', $msg);
3708 }
3709
3710 $resultstr = $logdata{entry};
3711 return ($retcode, $retmsg);
3712} # end updateRec()
3713
3714
3715## DNSDB::delRec()
3716# Delete a record.
3717sub delRec {
3718 $errstr = '';
3719 my $dbh = shift;
3720 my $defrec = shift;
3721 my $revrec = shift;
3722 my $id = shift;
3723
3724 my $oldrec = getRecLine($dbh, $defrec, $revrec, $id);
3725
3726 # Allow transactions, and raise an exception on errors so we can catch it later.
3727 # Use local to make sure these get "reset" properly on exiting this block
3728 local $dbh->{AutoCommit} = 0;
3729 local $dbh->{RaiseError} = 1;
3730
3731 # Put together the log entry
3732 my %logdata;
3733 $logdata{domain_id} = $oldrec->{domain_id};
3734 $logdata{rdns_id} = $oldrec->{rdns_id};
3735 $logdata{group_id} = $oldrec->{group_id} if $defrec eq 'y';
3736 $logdata{group_id} = parentID($dbh,
3737 (id => $oldrec->{domain_id}, type => ($revrec eq 'n' ? 'domain' : 'revzone'), revrec => $revrec) )
3738 if $defrec eq 'n';
3739 $logdata{entry} = "Deleted ".($defrec eq 'y' ? 'default record ' : 'record ').
3740 "'$oldrec->{host} $typemap{$oldrec->{type}} $oldrec->{val}";
3741 $logdata{entry} .= " [distance $oldrec->{distance}]" if $typemap{$oldrec->{type}} eq 'MX';
3742 $logdata{entry} .= " [priority $oldrec->{distance}] [weight $oldrec->{weight}] [port $oldrec->{port}]"
3743 if $typemap{$oldrec->{type}} eq 'SRV';
3744 $logdata{entry} .= "', TTL $oldrec->{ttl}\n";
3745
3746 eval {
3747 my $sth = $dbh->do("DELETE FROM "._rectable($defrec,$revrec)." WHERE record_id=?", undef, ($id));
3748 _log($dbh, %logdata);
3749 $dbh->commit;
3750 };
3751 if ($@) {
3752 my $msg = $@;
3753 eval { $dbh->rollback; };
3754 if ($config{log_failures}) {
3755 $logdata{entry} = "Error deleting ".($defrec eq 'y' ? 'default record' : 'record').
3756 " '$oldrec->{host} $typemap{$oldrec->{type}} $oldrec->{val}', TTL $oldrec->{ttl} ($msg)";
3757 _log($dbh, %logdata);
3758 $dbh->commit;
3759 }
3760 return ('FAIL', $msg);
3761 }
3762
3763 return ('OK',$logdata{entry});
3764} # end delRec()
3765
3766
3767## DNSDB::getLogCount()
3768# Get a count of log entries
3769# Takes a database handle and a hash containing at least:
3770# - Entity ID and entity type as the primary log "slice"
3771sub getLogCount {
3772 my $dbh = shift;
3773
3774 my %args = @_;
3775
3776 my @filterargs;
3777##fixme: which fields do we want to filter on?
3778# push @filterargs,
3779
3780 $errstr = 'Missing primary parent ID and/or type';
3781 # fail early if we don't have a "prime" ID to look for log entries for
3782 return if !$args{id};
3783
3784 # or if the prime id type is missing or invalid
3785 return if !$args{logtype};
3786 $args{logtype} = 'revzone' if $args{logtype} eq 'rdns'; # hack pthui
3787 $args{logtype} = 'domain' if $args{logtype} eq 'dom'; # hack pthui
3788 return if !grep /^$args{logtype}$/, ('group', 'domain', 'revzone', 'user');
3789
3790 $args{logtype} = 'revzone' if $args{logtype} eq 'rdns'; # hack pthui
3791
3792 my $sql = "SELECT count(*) FROM log ".
3793 "WHERE $id_col{$args{logtype}}=?".
3794 ($args{filter} ? " AND entry ~* ?" : '');
3795 my ($count) = $dbh->selectrow_array($sql, undef, ($args{id}, @filterargs) );
3796 $errstr = $dbh->errstr if !$count;
3797 return $count;
3798} # end getLogCount()
3799
3800
3801## DNSDB::getLogEntries()
3802# Get a list of log entries
3803# Takes arguments as with getLogCount() above, plus optional:
3804# - sort field
3805# - sort order
3806# - offset for pagination
3807sub getLogEntries {
3808 my $dbh = shift;
3809
3810 my %args = @_;
3811
3812 my @filterargs;
3813
3814 # fail early if we don't have a "prime" ID to look for log entries for
3815 return if !$args{id};
3816
3817 # or if the prime id type is missing or invalid
3818 return if !$args{logtype};
3819 $args{logtype} = 'revzone' if $args{logtype} eq 'rdns'; # hack pthui
3820 $args{logtype} = 'domain' if $args{logtype} eq 'dom'; # hack pthui
3821 return if !grep /^$args{logtype}$/, ('group', 'domain', 'revzone', 'user');
3822
3823 # Sorting defaults
3824 $args{sortby} = 'stamp' if !$args{sortby};
3825 $args{sortorder} = 'DESC' if !$args{sortorder};
3826 $args{offset} = 0 if !$args{offset} || $args{offset} !~ /^(?:all|\d+)$/;
3827
3828 my %sortmap = (fname => 'name', username => 'email', entry => 'entry', stamp => 'stamp');
3829 $args{sortby} = $sortmap{$args{sortby}};
3830
3831 my $sql = "SELECT user_id AS userid, email AS useremail, name AS userfname, entry AS logentry, ".
3832 "date_trunc('second',stamp) AS logtime ".
3833 "FROM log ".
3834 "WHERE $id_col{$args{logtype}}=?".
3835 ($args{filter} ? " AND entry ~* ?" : '').
3836 " ORDER BY $args{sortby} $args{sortorder}, log_id $args{sortorder}".
3837 ($args{offset} eq 'all' ? '' : " LIMIT $config{perpage} OFFSET ".$args{offset}*$config{perpage});
3838 my $loglist = $dbh->selectall_arrayref($sql, { Slice => {} }, ($args{id}, @filterargs) );
3839 $errstr = $dbh->errstr if !$loglist;
3840 return $loglist;
3841} # end getLogEntries()
3842
3843
3844## DNSDB::getTypelist()
3845# Get a list of record types for various UI dropdowns
3846# Takes database handle, forward/reverse/lookup flag, and optional "tag as selected" indicator (defaults to A)
3847# Returns an arrayref to list of hashrefs perfect for HTML::Template
3848sub getTypelist {
3849 my $dbh = shift;
3850 my $recgroup = shift;
3851 my $type = shift || $reverse_typemap{A};
3852
3853 # also accepting $webvar{revrec}!
3854 $recgroup = 'f' if $recgroup eq 'n';
3855 $recgroup = 'r' if $recgroup eq 'y';
3856
3857 my $sql = "SELECT val,name FROM rectypes WHERE ";
3858 if ($recgroup eq 'r') {
3859 # reverse zone types
3860 $sql .= "stdflag=2 OR stdflag=3";
3861 } elsif ($recgroup eq 'l') {
3862 # DNS lookup types. Note we avoid our custom types >= 65280, since those are entirely internal.
3863 $sql .= "(stdflag=1 OR stdflag=2 OR stdflag=3) AND val < 65280";
3864 } else {
3865 # default; forward zone types. technically $type eq 'f' but not worth the error message.
3866 $sql .= "stdflag=1 OR stdflag=2";
3867 }
3868 $sql .= " ORDER BY listorder";
3869
3870 my $sth = $dbh->prepare($sql);
3871 $sth->execute;
3872 my @typelist;
3873 while (my ($rval,$rname) = $sth->fetchrow_array()) {
3874 my %row = ( recval => $rval, recname => $rname );
3875 $row{tselect} = 1 if $rval == $type;
3876 push @typelist, \%row;
3877 }
3878
3879 # Add SOA on lookups since it's not listed in other dropdowns.
3880 if ($recgroup eq 'l') {
3881 my %row = ( recval => $reverse_typemap{SOA}, recname => 'SOA' );
3882 $row{tselect} = 1 if $reverse_typemap{SOA} == $type;
3883 push @typelist, \%row;
3884 }
3885
3886 return \@typelist;
3887} # end getTypelist()
3888
3889
3890## DNSDB::parentID()
3891# Get ID of entity that is nearest parent to requested id
3892# Takes a database handle and a hash of entity ID, entity type, optional parent type flag
3893# (domain/reverse zone or group), and optional default/live and forward/reverse flags
3894# Returns the ID or undef on failure
3895sub parentID {
3896 my $dbh = shift;
3897
3898 my %args = @_;
3899
3900 # clean up the parent-type. Set it to group if not set; coerce revzone to domain for simpler logic
3901 $args{partype} = 'group' if !$args{partype};
3902 $args{partype} = 'domain' if $args{partype} eq 'revzone';
3903
3904 # clean up defrec and revrec. default to live record, forward zone
3905 $args{defrec} = 'n' if !$args{defrec};
3906 $args{revrec} = 'n' if !$args{revrec};
3907
3908 if ($par_type{$args{partype}} eq 'domain') {
3909 # only live records can have a domain/zone parent
3910 return unless ($args{type} eq 'record' && $args{defrec} eq 'n');
3911 my $result = $dbh->selectrow_hashref("SELECT ".($args{revrec} eq 'n' ? 'domain_id' : 'rdns_id').
3912 " FROM records WHERE record_id = ?",
3913 undef, ($args{id}) ) or return;
3914 return $result;
3915 } else {
3916 # snag some arguments that will either fall through or be overwritten to save some code duplication
3917 my $tmpid = $args{id};
3918 my $type = $args{type};
3919 if ($type eq 'record' && $args{defrec} eq 'n') {
3920 # Live records go through the records table first.
3921 ($tmpid) = $dbh->selectrow_array("SELECT ".($args{revrec} eq 'n' ? 'domain_id' : 'rdns_id').
3922 " FROM records WHERE record_id = ?",
3923 undef, ($args{id}) ) or return;
3924 $type = ($args{revrec} eq 'n' ? 'domain' : 'revzone');
3925 }
3926 my ($result) = $dbh->selectrow_array("SELECT $par_col{$type} FROM $par_tbl{$type} WHERE $id_col{$type} = ?",
3927 undef, ($tmpid) );
3928 return $result;
3929 }
3930# should be impossible to get here with even remotely sane arguments
3931 return;
3932} # end parentID()
3933
3934
3935## DNSDB::isParent()
3936# Returns true if $id1 is a parent of $id2, false otherwise
3937sub isParent {
3938 my $dbh = shift;
3939 my $id1 = shift;
3940 my $type1 = shift;
3941 my $id2 = shift;
3942 my $type2 = shift;
3943##todo: immediate, secondary, full (default)
3944
3945 # Return false on invalid types
3946 return 0 if !grep /^$type1$/, ('record','defrec','defrevrec','user','domain','revzone','group');
3947 return 0 if !grep /^$type2$/, ('record','defrec','defrevrec','user','domain','revzone','group');
3948
3949 # Return false on impossible relations
3950 return 0 if $type1 eq 'record'; # nothing may be a child of a record
3951 return 0 if $type1 eq 'defrec'; # nothing may be a child of a record
3952 return 0 if $type1 eq 'defrevrec'; # nothing may be a child of a record
3953 return 0 if $type1 eq 'user'; # nothing may be child of a user
3954 return 0 if $type1 eq 'domain' && $type2 ne 'record'; # domain may not be a parent of anything other than a record
3955 return 0 if $type1 eq 'revzone' && $type2 ne 'record';# reverse zone may not be a parent of anything other than a record
3956
3957 # ennnhhhh.... if we're passed an id of 0, it will never be found. usual
3958 # case would be the UI creating a new <thing>, and so we don't have an ID for
3959 # <thing> to look up yet. in that case the UI should check the parent as well.
3960 return 0 if $id1 == 0; # nothing can have a parent id of 0
3961 return 1 if $id2 == 0; # anything could have a child id of 0 (or "unknown")
3962
3963 # group 1 is the ultimate root parent
3964 return 1 if $type1 eq 'group' && $id1 == 1;
3965
3966 # groups are always (a) parent of themselves
3967 return 1 if $type1 eq 'group' && $type2 eq 'group' && $id1 == $id2;
3968
3969 my $id = $id2;
3970 my $type = $type2;
3971 my $foundparent = 0;
3972
3973 # Records are the only entity with two possible parents. We need to split the parent checks on
3974 # domain/rdns.
3975 if ($type eq 'record') {
3976 my ($dom,$rdns) = $dbh->selectrow_array("SELECT domain_id,rdns_id FROM records WHERE record_id=?",
3977 undef, ($id));
3978 # check immediate parent against request
3979 return 1 if $type1 eq 'domain' && $id1 == $dom;
3980 return 1 if $type1 eq 'revzone' && $id1 == $rdns;
3981 # if request is group, check *both* parents. Only check if the parent is nonzero though.
3982 return 1 if $dom && isParent($dbh, $id1, $type1, $dom, 'domain');
3983 return 1 if $rdns && isParent($dbh, $id1, $type1, $rdns, 'revzone');
3984 # exit here since we've executed the loop below by proxy in the above recursive calls.
3985 return 0;
3986 }
3987
3988# almost the same loop as getParents() above
3989 my $limiter = 0;
3990 while (1) {
3991 my $sql = "SELECT $par_col{$type} FROM $par_tbl{$type} WHERE $id_col{$type} = ?";
3992 my $result = $dbh->selectrow_hashref($sql,
3993 undef, ($id) );
3994 if (!$result) {
3995 $limiter++;
3996##fixme: how often will this happen on a live site? fail at max limiter <n>?
3997 warn "no results looking for $sql with id $id (depth $limiter)\n";
3998 last;
3999 }
4000 if ($result && $result->{$par_col{$type}} == $id1) {
4001 $foundparent = 1;
4002 last;
4003 } else {
4004##fixme: do we care about trying to return a "no such record/domain/user/group" error?
4005# should be impossible to create an inconsistent DB just with API calls.
4006 warn $dbh->errstr." $sql, $id" if $dbh->errstr;
4007 }
4008 # group 1 is its own parent. need this here more to break strange loops than for detecting a parent
4009 last if $result->{$par_col{$type}} == 1;
4010 $id = $result->{$par_col{$type}};
4011 $type = $par_type{$type};
4012 }
4013
4014 return $foundparent;
4015} # end isParent()
4016
4017
4018## DNSDB::zoneStatus()
4019# Returns and optionally sets a zone's status
4020# Takes a database handle, domain/revzone ID, forward/reverse flag, and optionally a status argument
4021# Returns status, or undef on errors.
4022sub zoneStatus {
4023 my $dbh = shift;
4024 my $id = shift;
4025 my $revrec = shift;
4026 my $newstatus = shift || 'mu';
4027
4028 return undef if $id !~ /^\d+$/;
4029
4030 # Allow transactions, and raise an exception on errors so we can catch it later.
4031 # Use local to make sure these get "reset" properly on exiting this block
4032 local $dbh->{AutoCommit} = 0;
4033 local $dbh->{RaiseError} = 1;
4034
4035 if ($newstatus ne 'mu') {
4036 # ooo, fun! let's see what we were passed for status
4037 eval {
4038 $newstatus = 0 if $newstatus eq 'domoff';
4039 $newstatus = 1 if $newstatus eq 'domon';
4040 $dbh->do("UPDATE ".($revrec eq 'n' ? 'domains' : 'revzones')." SET status=? WHERE ".
4041 ($revrec eq 'n' ? 'domain_id' : 'rdns_id')."=?", undef, ($newstatus,$id) );
4042
4043##fixme switch to more consise "Enabled <domain"/"Disabled <domain>" as with users?
4044 $resultstr = "Changed ".($revrec eq 'n' ? domainName($dbh, $id) : revName($dbh, $id)).
4045 " state to ".($newstatus ? 'active' : 'inactive');
4046
4047 my %loghash;
4048 $loghash{domain_id} = $id if $revrec eq 'n';
4049 $loghash{rdns_id} = $id if $revrec eq 'y';
4050 $loghash{group_id} = parentID($dbh,
4051 (id => $id, type => ($revrec eq 'n' ? 'domain' : 'revzone'), revrec => $revrec) );
4052 $loghash{entry} = $resultstr;
4053 _log($dbh, %loghash);
4054
4055 $dbh->commit;
4056 };
4057 if ($@) {
4058 my $msg = $@;
4059 eval { $dbh->rollback; };
4060 $resultstr = '';
4061 $errstr = $msg;
4062 return;
4063 }
4064 }
4065
4066 my ($status) = $dbh->selectrow_array("SELECT status FROM ".
4067 ($revrec eq 'n' ? "domains WHERE domain_id=?" : "revzones WHERE rdns_id=?"),
4068 undef, ($id) );
4069 return $status;
4070} # end zoneStatus()
4071
4072
4073## DNSDB::importAXFR
4074# Import a domain via AXFR
4075# Takes AXFR host, domain to transfer, group to put the domain in,
4076# and optionally:
4077# - active/inactive state flag (defaults to active)
4078# - overwrite-SOA flag (defaults to off)
4079# - overwrite-NS flag (defaults to off, doesn't affect subdomain NS records)
4080# Returns a status code (OK, WARN, or FAIL) and message - message should be blank
4081# if status is OK, but WARN includes conditions that are not fatal but should
4082# really be reported.
4083sub importAXFR {
4084 my $dbh = shift;
4085 my $ifrom_in = shift;
4086 my $zone = shift;
4087 my $group = shift;
4088 my $status = shift || 1;
4089 my $rwsoa = shift || 0;
4090 my $rwns = shift || 0;
4091 my $merge = shift || 0; # do we attempt to merge A/AAAA and PTR records whenever possible?
4092 # do we overload this with the fixme below?
4093##fixme: add mode to delete&replace, merge+overwrite, merge new?
4094
4095 my $nrecs = 0;
4096 my $soaflag = 0;
4097 my $nsflag = 0;
4098 my $warnmsg = '';
4099 my $ifrom;
4100
4101 my $rev = 'n';
4102 my $code = 'OK';
4103 my $msg = 'foobar?';
4104
4105 # choke on possible bad setting in ifrom
4106 # IPv4 and v6, and valid hostnames!
4107 ($ifrom) = ($ifrom_in =~ /^([0-9a-f\:.]+|[0-9a-z_.-]+)$/i);
4108 return ('FAIL', "Bad AXFR source host $ifrom")
4109 unless ($ifrom) = ($ifrom_in =~ /^([0-9a-f\:.]+|[0-9a-z_.-]+)$/i);
4110
4111 my $errmsg;
4112
4113 my $zone_id;
4114 my $domain_id = 0;
4115 my $rdns_id = 0;
4116 my $cidr;
4117
4118# magic happens! detect if we're importing a domain or a reverse zone
4119# while we're at it, figure out what the CIDR netblock is (if we got a .arpa)
4120# or what the formal .arpa zone is (if we got a CIDR netblock)
4121# Handles sub-octet v4 zones in the format specified in the Cricket Book, 2nd Ed, p217-218
4122
4123 if ($zone =~ m{(?:\.arpa\.?|/\d+)$}) {
4124 # we seem to have a reverse zone
4125 $rev = 'y';
4126
4127 if ($zone =~ /\.arpa\.?$/) {
4128 # we have a formal reverse zone. call _zone2cidr and get the CIDR block.
4129 ($code,$msg) = _zone2cidr($zone);
4130 return ($code, $msg) if $code eq 'FAIL';
4131 $cidr = $msg;
4132 } elsif ($zone =~ m|^[\d.]+/\d+$|) {
4133 # v4 revzone, CIDR netblock
4134 $cidr = NetAddr::IP->new($zone) or return ('FAIL',"$zone is not a valid CIDR block");
4135 $zone = _ZONE($cidr, 'ZONE.in-addr.arpa', 'r', '.');
4136 } elsif ($zone =~ m|^[a-fA-F\d:]+/\d+$|) {
4137 # v6 revzone, CIDR netblock
4138 $cidr = NetAddr::IP->new($zone) or return ('FAIL',"$zone is not a valid CIDR block");
4139 return ('FAIL', "$zone is not a nibble-aligned block") if $cidr->masklen % 4 != 0;
4140 $zone = _ZONE($cidr, 'ZONE.ip6.arpa', 'r', '.');
4141 } else {
4142 # there is. no. else!
4143 return ('FAIL', "Unknown zone name format");
4144 }
4145
4146 # quick check to start to see if we've already got one
4147
4148 ($zone_id) = $dbh->selectrow_array("SELECT rdns_id FROM revzones WHERE revnet=?",
4149 undef, ("$cidr"));
4150 $rdns_id = $zone_id;
4151 } else {
4152 # default to domain
4153 ($zone_id) = $dbh->selectrow_array("SELECT domain_id FROM domains WHERE lower(domain) = lower(?)",
4154 undef, ($zone));
4155 $domain_id = $zone_id;
4156 }
4157
4158 return ('FAIL', ($rev eq 'n' ? 'Domain' : 'Reverse zone')." already exists") if $zone_id;
4159
4160 # little local utility sub to swap $val and $host for revzone records.
4161 sub _revswap {
4162 my $rechost = shift;
4163 my $recdata = shift;
4164
4165 if ($rechost =~ /\.in-addr\.arpa\.?$/) {
4166 $rechost =~ s/\.in-addr\.arpa\.?$//;
4167 $rechost = join '.', reverse split /\./, $rechost;
4168 } else {
4169 $rechost =~ s/\.ip6\.arpa\.?$//;
4170 my @nibs = reverse split /\./, $rechost;
4171 $rechost = '';
4172 my $nc;
4173 foreach (@nibs) {
4174 $rechost.= $_;
4175 $rechost .= ":" if ++$nc % 4 == 0 && $nc < 32;
4176 }
4177 $rechost .= ":" if $nc < 32 && $rechost !~ /\*$/; # close netblock records?
4178##fixme: there's a case that ends up with a partial entry here:
4179# ip:add:re:ss::
4180# can't reproduce after letting it sit overnight after discovery. :(
4181#print "$rechost\n";
4182 # canonicalize with NetAddr::IP
4183 $rechost = NetAddr::IP->new($rechost)->addr unless $rechost =~ /\*$/;
4184 }
4185 return ($recdata,$rechost)
4186 }
4187
4188
4189 # Allow transactions, and raise an exception on errors so we can catch it later.
4190 # Use local to make sure these get "reset" properly on exiting this block
4191 local $dbh->{AutoCommit} = 0;
4192 local $dbh->{RaiseError} = 1;
4193
4194 my $sth;
4195 eval {
4196
4197 if ($rev eq 'n') {
4198##fixme: serial
4199 $dbh->do("INSERT INTO domains (domain,group_id,status) VALUES (?,?,?)", undef, ($zone,$group,$status) );
4200 # get domain id so we can do the records
4201 ($zone_id) = $dbh->selectrow_array("SELECT currval('domains_domain_id_seq')");
4202 $domain_id = $zone_id;
4203 _log($dbh, (group_id => $group, domain_id => $domain_id,
4204 entry => "[Added ".($status ? 'active' : 'inactive')." domain $zone via AXFR]") );
4205 } else {
4206##fixme: serial
4207 $dbh->do("INSERT INTO revzones (revnet,group_id,status) VALUES (?,?,?)", undef, ($cidr,$group,$status) );
4208 # get revzone id so we can do the records
4209 ($zone_id) = $dbh->selectrow_array("SELECT currval('revzones_rdns_id_seq')");
4210 $rdns_id = $zone_id;
4211 _log($dbh, (group_id => $group, rdns_id => $rdns_id,
4212 entry => "[Added ".($status ? 'active' : 'inactive')." reverse zone $cidr via AXFR]") );
4213 }
4214
4215## bizarre DBI<->Net::DNS interaction bug:
4216## sometimes a zone will cause an immediate commit-and-exit (sort of) of the while()
4217## fixed, apparently I was doing *something* odd, but not certain what it was that
4218## caused a commit instead of barfing
4219
4220 my $res = Net::DNS::Resolver->new;
4221 $res->nameservers($ifrom);
4222 $res->axfr_start($zone)
4223 or die "Couldn't begin AXFR\n";
4224
4225 $sth = $dbh->prepare("INSERT INTO records (domain_id,rdns_id,host,type,val,distance,weight,port,ttl)".
4226 " VALUES (?,?,?,?,?,?,?,?,?)");
4227
4228 # Stash info about sub-octet v4 revzones here so we don't have
4229 # to store the CNAMEs used to delegate a suboctet zone
4230 # $suboct{zone}{ns}[] -> array of nameservers
4231 # $suboct{zone}{cname}[] -> array of extant CNAMEs (Just In Case someone did something bizarre)
4232## commented pending actual use of this data. for now, we'll just
4233## auto-(re)create the CNAMEs in revzones on export
4234# my %suboct;
4235
4236 while (my $rr = $res->axfr_next()) {
4237
4238 my $val;
4239 my $distance = 0;
4240 my $weight = 0;
4241 my $port = 0;
4242 my $logfrag = '';
4243
4244 my $type = $rr->type;
4245 my $host = $rr->name;
4246 my $ttl = $rr->ttl;
4247
4248 $soaflag = 1 if $type eq 'SOA';
4249 $nsflag = 1 if $type eq 'NS';
4250
4251# "Primary" types:
4252# A, NS, CNAME, SOA, PTR(warn in forward), MX, TXT, AAAA, SRV, A6(ob), SPF
4253# maybe KEY
4254
4255# BIND supports:
4256# [standard]
4257# A AAAA CNAME MX NS PTR SOA TXT
4258# [variously experimental, obsolete, or obscure]
4259# HINFO MB(ex) MD(ob) MF(ob) MG(ex) MINFO(ex) MR(ex) NULL WKS AFSDB(ex) ISDN(ex) RP(ex) RT(ex) X25(ex) PX
4260# ... if one can ever find the right magic to format them correctly
4261
4262# Net::DNS supports:
4263# RRSIG SIG NSAP NS NIMLOC NAPTR MX MR MINFO MG MB LOC ISDN IPSECKEY HINFO
4264# EID DNAME CNAME CERT APL AFSDB AAAA A DS NXT NSEC3PARAM NSEC3 NSEC KEY
4265# DNSKEY DLV X25 TXT TSIG TKEY SSHFP SRV SPF SOA RT RP PX PTR NULL APL::AplItem
4266
4267# nasty big ugly case-like thing here, since we have to do *some* different
4268# processing depending on the record. le sigh.
4269
4270##fixme: what record types other than TXT can/will have >255-byte payloads?
4271
4272 if ($type eq 'A') {
4273 $val = $rr->address;
4274 } elsif ($type eq 'NS') {
4275# hmm. should we warn here if subdomain NS'es are left alone?
4276 next if ($rwns && ($rr->name eq $zone));
4277 if ($rev eq 'y') {
4278 # revzones have records more or less reversed from forward zones.
4279 my ($tmpcode,$tmpmsg) = _zone2cidr($host);
4280 die "Error converting NS record: $tmpmsg\n" if $tmpcode eq 'FAIL'; # hmm. may not make sense...
4281 $val = "$tmpmsg";
4282 $host = $rr->nsdname;
4283 $logfrag = "Added record '$val $type $host', TTL $ttl";
4284# Tag and preserve. For now this is commented for a no-op, but we have Ideas for
4285# another custom storage type ("DELEGATE") that will use these subzone-delegation records
4286#if ($val ne "$cidr") {
4287# push @{$suboct{$val}{ns}}, $host;
4288#}
4289 } else {
4290 $val = $rr->nsdname;
4291 }
4292 $nsflag = 1;
4293 } elsif ($type eq 'CNAME') {
4294 if ($rev eq 'y') {
4295 # hmm. do we even want to bother with storing these at this level? Sub-octet delegation
4296 # by CNAME is essentially a record-publication hack, and we want to just represent the
4297 # "true" logical intentions as far down the stack as we can from the UI.
4298 ($host,$val) = _revswap($host,$rr->cname);
4299 $logfrag = "Added record '$val $type $host', TTL $ttl";
4300# Tag and preserve in case we want to commit them as-is later, but mostly we don't care.
4301# Commented pending actually doing something with possibly new type DELEGATE
4302#my $tmprev = $host;
4303#$tmprev =~ s/^\d+\.//;
4304#($code,$tmprev) = _zone2cidr($tmprev);
4305#push @{$suboct{"$tmprev"}{cname}}, $val;
4306 # Silently skip CNAMEs in revzones.
4307 next;
4308 } else {
4309 $val = $rr->cname;
4310 }
4311 } elsif ($type eq 'SOA') {
4312 next if $rwsoa;
4313 $host = $rr->rname.":".$rr->mname;
4314 $val = $rr->refresh.":".$rr->retry.":".$rr->expire.":".$rr->minimum;
4315 $soaflag = 1;
4316 } elsif ($type eq 'PTR') {
4317 ($host,$val) = _revswap($host,$rr->ptrdname);
4318 $logfrag = "Added record '$val $type $host', TTL $ttl";
4319 # hmm. PTR records should not be in forward zones.
4320 } elsif ($type eq 'MX') {
4321 $val = $rr->exchange;
4322 $distance = $rr->preference;
4323 } elsif ($type eq 'TXT') {
4324##fixme: Net::DNS docs say this should be deprecated for rdatastr() or char_str_list(),
4325## but don't really seem enthusiastic about it.
4326#print "should use rdatastr:\n\t".$rr->rdatastr."\n or char_str_list:\n\t".join(' ',$rr->char_str_list())."\n";
4327# rdatastr returns a BIND-targetted logical string, including opening and closing quotes
4328# char_str_list returns a list of the individual string fragments in the record
4329# txtdata returns the more useful all-in-one form (since we want to push such protocol
4330# details as far down the stack as we can)
4331# NB: this may turn out to be more troublesome if we ever have need of >512-byte TXT records.
4332 if ($rev eq 'y') {
4333 ($host,$val) = _revswap($host,$rr->txtdata);
4334 $logfrag = "Added record '$val $type $host', TTL $ttl";
4335 } else {
4336 $val = $rr->txtdata;
4337 }
4338 } elsif ($type eq 'SPF') {
4339##fixme: and the same caveat here, since it is apparently a clone of ::TXT
4340 $val = $rr->txtdata;
4341 } elsif ($type eq 'AAAA') {
4342 $val = $rr->address;
4343 } elsif ($type eq 'SRV') {
4344 $val = $rr->target;
4345 $distance = $rr->priority;
4346 $weight = $rr->weight;
4347 $port = $rr->port;
4348 } elsif ($type eq 'KEY') {
4349 # we don't actually know what to do with these...
4350 $val = $rr->flags.":".$rr->protocol.":".$rr->algorithm.":".$rr->key.":".$rr->keytag.":".$rr->privatekeyname;
4351 } else {
4352 $val = $rr->rdatastr;
4353 # Finding a different record type is not fatal.... just problematic.
4354 # We may not be able to export it correctly.
4355 $warnmsg .= "Unusual record ".$rr->name." ($type) found\n";
4356 }
4357
4358 my $logentry = "[AXFR ".($rev eq 'n' ? $zone : $cidr)."] ";
4359
4360 if ($merge) {
4361 if ($rev eq 'n') {
4362 # importing a domain; we have A and AAAA records that could be merged with matching PTR records
4363 my $etype;
4364 my ($erdns,$erid,$ettl) = $dbh->selectrow_array("SELECT rdns_id,record_id,ttl FROM records ".
4365 "WHERE host=? AND val=? AND type=12",
4366 undef, ($host, $val) );
4367 if ($erid) {
4368 if ($type eq 'A') { # PTR -> A+PTR
4369 $etype = 65280;
4370 $logentry .= "Merged A record with existing PTR record '$host A+PTR $val', TTL $ettl";
4371 }
4372 if ($type eq 'AAAA') { # PTR -> AAAA+PTR
4373 $etype = 65281;
4374 $logentry .= "Merged AAAA record with existing PTR record '$host AAAA+PTR $val', TTL $ettl";
4375 }
4376 $ettl = ($ettl < $ttl ? $ettl : $ttl); # use lower TTL
4377 $dbh->do("UPDATE records SET domain_id=?,ttl=?,type=? WHERE record_id=?", undef,
4378 ($domain_id, $ettl, $etype, $erid));
4379 $nrecs++;
4380 _log($dbh, (group_id => $group, domain_id => $domain_id, rdns_id => $erdns, entry => $logentry) );
4381 next; # while axfr_next
4382 }
4383 } # $rev eq 'n'
4384 else {
4385 # importing a revzone, we have PTR records that could be merged with matching A/AAAA records
4386 my ($domid,$erid,$ettl,$etype) = $dbh->selectrow_array("SELECT domain_id,record_id,ttl,type FROM records ".
4387 "WHERE host=? AND val=? AND (type=1 OR type=28)",
4388 undef, ($host, $val) );
4389 if ($erid) {
4390 if ($etype == 1) { # A -> A+PTR
4391 $etype = 65280;
4392 $logentry .= "Merged PTR record with existing matching A record '$host A+PTR $val', TTL $ettl";
4393 }
4394 if ($etype == 28) { # AAAA -> AAAA+PTR
4395 $etype = 65281;
4396 $logentry .= "Merged PTR record with existing matching AAAA record '$host AAAA+PTR $val', TTL $ettl";
4397 }
4398 $ettl = ($ettl < $ttl ? $ettl : $ttl); # use lower TTL
4399 $dbh->do("UPDATE records SET rdns_id=?,ttl=?,type=? WHERE record_id=?", undef,
4400 ($rdns_id, $ettl, $etype, $erid));
4401 $nrecs++;
4402 _log($dbh, (group_id => $group, domain_id => $domid, rdns_id => $rdns_id, entry => $logentry) );
4403 next; # while axfr_next
4404 }
4405 } # $rev eq 'y'
4406 } # if $merge
4407
4408 # Insert the new record
4409 $sth->execute($domain_id, $rdns_id, $host, $reverse_typemap{$type}, $val,
4410 $distance, $weight, $port, $ttl);
4411
4412 $nrecs++;
4413
4414 if ($type eq 'SOA') {
4415 # also !$rwsoa, but if that's set, it should be impossible to get here.
4416 my @tmp1 = split /:/, $host;
4417 my @tmp2 = split /:/, $val;
4418 $logentry .= "Added SOA record [contact $tmp1[0]] [master $tmp1[1]] ".
4419 "[refresh $tmp2[0]] [retry $tmp2[1]] [expire $tmp2[2]] [minttl $tmp2[3]], TTL $ttl";
4420 } elsif ($logfrag) {
4421 # special case for log entries we need to meddle with a little.
4422 $logentry .= $logfrag;
4423 } else {
4424 $logentry .= "Added record '$host $type";
4425 $logentry .= " [distance $distance]" if $type eq 'MX';
4426 $logentry .= " [priority $distance] [weight $weight] [port $port]" if $type eq 'SRV';
4427 $logentry .= " $val', TTL $ttl";
4428 }
4429 _log($dbh, (group_id => $group, domain_id => $domain_id, rdns_id => $rdns_id, entry => $logentry) );
4430
4431 } # while axfr_next
4432
4433# Detect and handle delegated subzones
4434# Placeholder for when we decide what to actually do with this, see previous comments in NS and CNAME handling.
4435#foreach (keys %suboct) {
4436# print "found ".($suboct{$_}{ns} ? @{$suboct{$_}{ns}} : '0')." NS records and ".
4437# ($suboct{$_}{cname} ? @{$suboct{$_}{cname}} : '0')." CNAMEs for $_\n";
4438#}
4439
4440 # Overwrite SOA record
4441 if ($rwsoa) {
4442 $soaflag = 1;
4443 my $sthgetsoa = $dbh->prepare("SELECT host,val,ttl FROM default_records WHERE group_id=? AND type=?");
4444 my $sthputsoa = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,ttl) VALUES (?,?,?,?,?)");
4445 $sthgetsoa->execute($group,$reverse_typemap{SOA});
4446 while (my ($host,$val,$ttl) = $sthgetsoa->fetchrow_array()) {
4447 $host =~ s/DOMAIN/$zone/g;
4448 $val =~ s/DOMAIN/$zone/g;
4449 $sthputsoa->execute($zone_id,$host,$reverse_typemap{SOA},$val,$ttl);
4450 }
4451 }
4452
4453 # Overwrite NS records
4454 if ($rwns) {
4455 $nsflag = 1;
4456 my $sthgetns = $dbh->prepare("SELECT host,val,ttl FROM default_records WHERE group_id=? AND type=?");
4457 my $sthputns = $dbh->prepare("INSERT INTO records (domain_id,host,type,val,ttl) VALUES (?,?,?,?,?)");
4458 $sthgetns->execute($group,$reverse_typemap{NS});
4459 while (my ($host,$val,$ttl) = $sthgetns->fetchrow_array()) {
4460 $host =~ s/DOMAIN/$zone/g;
4461 $val =~ s/DOMAIN/$zone/g;
4462 $sthputns->execute($zone_id,$host,$reverse_typemap{NS},$val,$ttl);
4463 }
4464 }
4465
4466 die "No records found; either $ifrom is not authoritative or doesn't allow transfers\n" if !$nrecs;
4467 die "Bad zone: No SOA record!\n" if !$soaflag;
4468 die "Bad zone: No NS records!\n" if !$nsflag;
4469
4470 $dbh->commit;
4471
4472 };
4473
4474 if ($@) {
4475 my $msg = $@;
4476 eval { $dbh->rollback; };
4477 return ('FAIL',$msg." $warnmsg");
4478 } else {
4479 return ('WARN', $warnmsg) if $warnmsg;
4480 return ('OK',"Imported OK");
4481 }
4482
4483 # it should be impossible to get here.
4484 return ('WARN',"OOOK!");
4485} # end importAXFR()
4486
4487
4488## DNSDB::importBIND()
4489sub importBIND {
4490} # end importBIND()
4491
4492
4493## DNSDB::import_tinydns()
4494sub import_tinydns {
4495} # end import_tinydns()
4496
4497
4498## DNSDB::export()
4499# Export the DNS database, or a part of it
4500# Takes database handle, export type, optional arguments depending on type
4501# Writes zone data to targets as appropriate for type
4502sub export {
4503 my $dbh = shift;
4504 my $target = shift;
4505
4506 if ($target eq 'tiny') {
4507 __export_tiny($dbh,@_);
4508 }
4509# elsif ($target eq 'foo') {
4510# __export_foo($dbh,@_);
4511#}
4512# etc
4513
4514} # end export()
4515
4516
4517## DNSDB::__export_tiny
4518# Internal sub to implement tinyDNS (compatible) export
4519# Takes database handle, filehandle to write export to, optional argument(s)
4520# to determine which data gets exported
4521sub __export_tiny {
4522 my $dbh = shift;
4523 my $datafile = shift;
4524
4525##fixme: slurp up further options to specify particular zone(s) to export
4526
4527##fixme: fail if $datafile isn't an open, writable file
4528
4529 # easy case - export all evarything
4530 # not-so-easy case - export item(s) specified
4531 # todo: figure out what kind of list we use to export items
4532
4533# raw packet in unknown format: first byte indicates length
4534# of remaining data, allows up to 255 raw bytes
4535
4536 # Locations/views - worth including in the caching setup?
4537 my $lochash = $dbh->selectall_hashref("SELECT location,iplist FROM locations", 'location');
4538 foreach my $location (keys %$lochash) {
4539 foreach my $ipprefix (split /[,\s]+/, $lochash->{$location}{iplist}) {
4540 $ipprefix =~ s/\s+//g;
4541 print $datafile "%$location:$ipprefix\n";
4542 }
4543 print $datafile "%$location\n" if !$lochash->{$location}{iplist};
4544 }
4545
4546 # tracking hash so we don't double-export A+PTR or AAAA+PTR records.
4547 my %recflags;
4548
4549 my $domsth = $dbh->prepare("SELECT domain_id,domain,status,changed FROM domains WHERE status=1");
4550 my $recsth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl,record_id,location ".
4551 "FROM records WHERE domain_id=? AND type < 65280"); # Just exclude all types relating to rDNS
4552 my $zonesth = $dbh->prepare("UPDATE domains SET changed='n' WHERE domain_id=?");
4553 $domsth->execute();
4554 while (my ($domid,$dom,$domstat,$changed) = $domsth->fetchrow_array) {
4555##fixme: need to find a way to block opening symlinked files without introducing a race.
4556# O_NOFOLLOW
4557# If pathname is a symbolic link, then the open fails. This is a FreeBSD extension, which was
4558# added to Linux in version 2.1.126. Symbolic links in earlier components of the pathname will
4559# still be followed.
4560# but that doesn't help other platforms. :/
4561 sysopen(ZONECACHE, "$config{exportcache}/$dom", O_RDWR|O_CREAT);
4562 flock(ZONECACHE, LOCK_EX);
4563 if ($changed || -s "$config{exportcache}/$dom" == 0) {
4564 $recsth->execute($domid);
4565 while (my ($host,$type,$val,$dist,$weight,$port,$ttl,$recid,$loc) = $recsth->fetchrow_array) {
4566 next if $recflags{$recid};
4567
4568 $loc = '' if !$loc; # de-nullify - just in case
4569##fixme: handle case of record-with-location-that-doesn't-exist better.
4570# note this currently fails safe (tested) - records with a location that
4571# doesn't exist will not be sent to any client
4572# $loc = '' if !$lochash->{$loc};
4573
4574##fixme: record validity timestamp. tinydns supports fiddling with timestamps.
4575# note $ttl must be set to 0 if we want to use tinydns's auto-expiring timestamps.
4576# timestamps are TAI64
4577# ~~ 2^62 + time()
4578 my $stamp = '';
4579
4580 # support tinydns' auto-TTL
4581 $ttl = '' if $ttl == '0';
4582
4583 _printrec_tiny($datafile, 'n', \%recflags,
4584 $dom, $host, $type, $val, $dist, $weight, $port, $ttl, $loc, $stamp);
4585
4586 _printrec_tiny(*ZONECACHE, 'n', \%recflags,
4587 $dom, $host, $type, $val, $dist, $weight, $port, $ttl, $loc, $stamp)
4588 if *ZONECACHE;
4589 # in case the zone shrunk, get rid of garbage at the end of the file.
4590 truncate(ZONECACHE, tell(ZONECACHE));
4591
4592 $recflags{$recid} = 1;
4593 } # while ($recsth)
4594 } else {
4595 # domain not changed, stream from cache
4596 print $datafile $_ while <ZONECACHE>;
4597 }
4598 close ZONECACHE;
4599 # mark domain as unmodified
4600 $zonesth->execute($domid);
4601 } # while ($domsth)
4602
4603 my $revsth = $dbh->prepare("SELECT rdns_id,revnet,status,changed FROM revzones WHERE status=1 ".
4604 "ORDER BY masklen(revnet) DESC");
4605
4606# For reasons unknown, we can't sanely UNION these statements. Feh.
4607# Supposedly it should work though (note last 3 lines):
4608## PG manual
4609#UNION Clause
4610#
4611#The UNION clause has this general form:
4612#
4613# select_statement UNION [ ALL ] select_statement
4614#
4615#select_statement is any SELECT statement without an ORDER BY, LIMIT, FOR UPDATE, or FOR SHARE clause. (ORDER BY
4616#and LIMIT can be attached to a subexpression if it is enclosed in parentheses. Without parentheses, these
4617#clauses will be taken to apply to the result of the UNION, not to its right-hand input expression.)
4618 my $soasth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl,record_id,location ".
4619 "FROM records WHERE rdns_id=? AND type=6");
4620 $recsth = $dbh->prepare("SELECT host,type,val,distance,weight,port,ttl,record_id,location ".
4621 "FROM records WHERE rdns_id=? AND not type=6 ".
4622 "ORDER BY masklen(CAST(val AS inet)) DESC, CAST(val AS inet)");
4623 $zonesth = $dbh->prepare("UPDATE revzones SET changed='n' WHERE rdns_id=?");
4624 $revsth->execute();
4625 while (my ($revid,$revzone,$revstat,$changed) = $revsth->fetchrow_array) {
4626##fixme: need to find a way to block opening symlinked files without introducing a race.
4627# O_NOFOLLOW
4628# If pathname is a symbolic link, then the open fails. This is a FreeBSD extension, which was
4629# added to Linux in version 2.1.126. Symbolic links in earlier components of the pathname will
4630# still be followed.
4631# but that doesn't help other platforms. :/
4632 my $tmpzone = NetAddr::IP->new($revzone);
4633 sysopen(ZONECACHE, "$config{exportcache}/".$tmpzone->network->addr, O_RDWR|O_CREAT);
4634 flock(ZONECACHE, LOCK_EX);
4635 if ($changed || -s "$config{exportcache}/".$tmpzone->network->addr == 0) {
4636 # need to fetch this separately since the rest of the records all (should) have real IPs in val
4637 $soasth->execute($revid);
4638 my (@zsoa) = $soasth->fetchrow_array();
4639 _printrec_tiny($datafile,'y',\%recflags,$revzone,
4640 $zsoa[0],$zsoa[1],$zsoa[2],$zsoa[3],$zsoa[4],$zsoa[5],$zsoa[6],$zsoa[8],'');
4641
4642 $recsth->execute($revid);
4643 while (my ($host,$type,$val,$dist,$weight,$port,$ttl,$recid,$loc) = $recsth->fetchrow_array) {
4644 next if $recflags{$recid};
4645
4646 $loc = '' if !$loc; # de-nullify - just in case
4647##fixme: handle case of record-with-location-that-doesn't-exist better.
4648# note this currently fails safe (tested) - records with a location that
4649# doesn't exist will not be sent to any client
4650# $loc = '' if !$lochash->{$loc};
4651
4652##fixme: record validity timestamp. tinydns supports fiddling with timestamps.
4653# note $ttl must be set to 0 if we want to use tinydns's auto-expiring timestamps.
4654# timestamps are TAI64
4655# ~~ 2^62 + time()
4656 my $stamp = '';
4657
4658 # support tinydns' auto-TTL
4659 $ttl = '' if $ttl == '0';
4660
4661 _printrec_tiny($datafile, 'y', \%recflags, $revzone,
4662 $host, $type, $val, $dist, $weight, $port, $ttl, $loc, $stamp);
4663 _printrec_tiny(*ZONECACHE, 'y', \%recflags, $revzone,
4664 $host, $type, $val, $dist, $weight, $port, $ttl, $loc, $stamp)
4665 if *ZONECACHE;
4666 # in case the zone shrunk, get rid of garbage at the end of the file.
4667 truncate(ZONECACHE, tell(ZONECACHE));
4668
4669 $recflags{$recid} = 1;
4670 } # while ($recsth)
4671 } else {
4672 # zone not changed, stream from cache
4673 print $datafile $_ while <ZONECACHE>;
4674 }
4675 close ZONECACHE;
4676 # mark domain as unmodified
4677 $zonesth->execute($revid);
4678 } # while ($domsth)
4679
4680} # end __export_tiny()
4681
4682
4683# Utility sub for __export_tiny above
4684sub _printrec_tiny {
4685 my ($datafile,$revrec,$recflags,$zone,$host,$type,$val,$dist,$weight,$port,$ttl,$loc,$stamp) = @_;
4686
4687 ## Convert a bare number into an octal-coded pair of octets.
4688 # Take optional arg to indicate a decimal or hex input. Defaults to hex.
4689 sub octalize {
4690 my $tmp = shift;
4691 my $srctype = shift || 'h'; # default assumes hex string
4692 $tmp = sprintf "%0.4x", hex($tmp) if $srctype eq 'h'; # 0-pad hex to 4 digits
4693 $tmp = sprintf "%0.4x", $tmp if $srctype eq 'd'; # 0-pad decimal to 4 hex digits
4694 my @o = ($tmp =~ /^(..)(..)$/); # split into octets
4695 return sprintf "\\%0.3o\\%0.3o", hex($o[0]), hex($o[1]);;
4696 }
4697
4698## WARNING: This works to export even the whole Internet's worth of IP space...
4699## if you have the disk/RAM to handle the dataset, and you call this sub based on /16-sized chunks
4700## A /16 took ~3 seconds with a handful of separate records; adding a /8 pushed export time out to ~13m:40s
4701## 0/0 is estimated to take ~54 hours and ~256G of disk
4702## RAM usage depends on how many non-template entries you have in the set.
4703## This should probably be done on record addition rather than export; large blocks may need to be done in a
4704## forked process
4705 sub __publish_subnet {
4706 my $sub = shift;
4707 my $recflags = shift;
4708 my $hpat = shift;
4709 my $fh = shift;
4710 my $ttl = shift;
4711 my $stamp = shift;
4712 my $loc = shift;
4713 my $ptronly = shift || 0;
4714
4715 my $iplist = $sub->splitref(32);
4716 foreach (@$iplist) {
4717 my $ip = $_->addr;
4718 # make as if we split the non-octet-aligned block into octet-aligned blocks as with SOA
4719 next if $ip =~ /\.(0|255)$/;
4720 next if $$recflags{$ip};
4721 $$recflags{$ip}++;
4722 my $rec = $hpat; # start fresh with the template for each IP
4723 _template4_expand(\$rec, $ip);
4724 print $fh ($ptronly ? "^"._ZONE($_, 'ZONE.in-addr.arpa', 'r', '.').":$rec" : "=$rec:$ip").
4725 ":$ttl:$stamp:$loc\n";
4726 }
4727 }
4728
4729##fixme? append . to all host/val hostnames
4730 if ($typemap{$type} eq 'SOA') {
4731
4732 # host contains pri-ns:responsible
4733 # val is abused to contain refresh:retry:expire:minttl
4734##fixme: "manual" serial vs tinydns-autoserial
4735 # let's be explicit about abusing $host and $val
4736 my ($email, $primary) = (split /:/, $host)[0,1];
4737 my ($refresh, $retry, $expire, $min_ttl) = (split /:/, $val)[0,1,2,3];
4738 if ($revrec eq 'y') {
4739##fixme: have to publish SOA records for each v4 /24 in sub-/16, and each /16 in sub-/8
4740# what about v6?
4741# -> only need SOA for local chunks offset from reverse delegation boundaries, so v6 is fine
4742 $zone = NetAddr::IP->new($zone);
4743 # handle split-n-multiply SOA for off-octet (8 < mask < 16) or (16 < mask < 24) v4 zones
4744 if (!$zone->{isv6} && ($zone->masklen < 24) && ($zone->masklen % 8 != 0)) {
4745 foreach my $szone ($zone->split($zone->masklen + (8 - $zone->masklen % 8))) {
4746 $szone = _ZONE($szone, 'ZONE.in-addr.arpa', 'r', '.');
4747 print $datafile "Z$szone:$primary:$email"."::$refresh:$retry:$expire:$min_ttl:$ttl:$stamp:$loc\n";
4748 }
4749 return; # skips "default" bits just below
4750 }
4751 $zone = _ZONE($zone, 'ZONE', 'r', '.').($zone->{isv6} ? '.ip6.arpa' : '.in-addr.arpa');
4752 }
4753 print $datafile "Z$zone:$primary:$email"."::$refresh:$retry:$expire:$min_ttl:$ttl:$stamp:$loc\n";
4754
4755 } elsif ($typemap{$type} eq 'A') {
4756
4757 print $datafile "+$host:$val:$ttl:$stamp:$loc\n";
4758
4759 } elsif ($typemap{$type} eq 'NS') {
4760
4761 if ($revrec eq 'y') {
4762 $val = NetAddr::IP->new($val);
4763 # handle split-n-multiply SOA for off-octet (8 < mask < 16) or (16 < mask < 24) v4 zones
4764 if (!$val->{isv6} && ($val->masklen < 24) && ($val->masklen % 8 != 0)) {
4765 foreach my $szone ($val->split($val->masklen + (8 - $val->masklen % 8))) {
4766 my $szone2 = _ZONE($szone, 'ZONE.in-addr.arpa', 'r', '.');
4767 next if $$recflags{$szone2} && $$recflags{$szone2} > $val->masklen;
4768 print $datafile "\&$szone2"."::$host:$ttl:$stamp:$loc\n";
4769 $$recflags{$szone2} = $val->masklen;
4770 }
4771 } elsif ($val->{isv6} && ($val->masklen < 64) && ($val->masklen % 4 !=0)) {
4772 foreach my $szone ($val->split($val->masklen + (4 - $val->masklen % 4))) {
4773 my $szone2 = _ZONE($szone, 'ZONE.ip6.arpa', 'r', '.');
4774 next if $$recflags{$szone2} && $$recflags{$szone2} > $val->masklen;
4775 print $datafile "\&$szone2"."::$host:$ttl:$stamp:$loc\n";
4776 $$recflags{$szone2} = $val->masklen;
4777 }
4778 } else {
4779 my $val2 = _ZONE($val, 'ZONE', 'r', '.').($val->{isv6} ? '.ip6.arpa' : '.in-addr.arpa');
4780 print $datafile "\&$val2"."::$host:$ttl:$stamp:$loc\n";
4781 $$recflags{$val2} = $val->masklen;
4782 }
4783 } else {
4784 print $datafile "\&$host"."::$val:$ttl:$stamp:$loc\n";
4785 }
4786
4787 } elsif ($typemap{$type} eq 'AAAA') {
4788
4789 print $datafile ":$host:28:";
4790 my $altgrp = 0;
4791 my @altconv;
4792 # Split in to up to 8 groups of hex digits (allows for IPv6 :: 0-collapsing)
4793 foreach (split /:/, $val) {
4794 if (/^$/) {
4795 # flag blank entry; this is a series of 0's of (currently) unknown length
4796 $altconv[$altgrp++] = 's';
4797 } else {
4798 # call sub to convert 1-4 hex digits to 2 string-rep octal bytes
4799 $altconv[$altgrp++] = octalize($_)
4800 }
4801 }
4802 foreach my $octet (@altconv) {
4803 # if not 's', output
4804 print $datafile $octet unless $octet =~ /^s$/;
4805 # if 's', output (9-array length)x literal '\000\000'
4806 print $datafile '\000\000'x(9-$altgrp) if $octet =~ /^s$/;
4807 }
4808 print $datafile ":$ttl:$stamp:$loc\n";
4809
4810 } elsif ($typemap{$type} eq 'MX') {
4811
4812 print $datafile "\@$host"."::$val:$dist:$ttl:$stamp:$loc\n";
4813
4814 } elsif ($typemap{$type} eq 'TXT') {
4815
4816##fixme: split v-e-r-y long TXT strings? will need to do so for BIND export, at least
4817 if ($revrec eq 'n') {
4818 $val =~ s/:/\\072/g; # may need to replace other symbols
4819 print $datafile "'$host:$val:$ttl:$stamp:$loc\n";
4820 } else {
4821 $host =~ s/:/\\072/g; # may need to replace other symbols
4822 my $val2 = NetAddr::IP->new($val);
4823 print $datafile "'"._ZONE($val2, 'ZONE', 'r', '.').($val2->{isv6} ? '.ip6.arpa' : '.in-addr.arpa').
4824 ":$host:$ttl:$stamp:$loc\n";
4825 }
4826
4827# by-hand TXT
4828#:deepnet.cx:16:2v\075spf1\040a\040a\072bacon.deepnet.cx\040a\072home.deepnet.cx\040-all:3600
4829#@ IN TXT "v=spf1 a a:bacon.deepnet.cx a:home.deepnet.cx -all"
4830#'deepnet.cx:v=spf1 a a\072bacon.deepnet.cx a\072home.deepnet.cx -all:3600
4831
4832#txttest IN TXT "v=foo bar:bob kn;ob' \" !@#$%^&*()-=_+[]{}<>?"
4833#:txttest.deepnet.cx:16:\054v\075foo\040bar\072bob\040kn\073ob\047\040\042\040\041\100\043\044\045\136\046\052\050\051-\075\137\053\133\135\173\175\074\076\077:3600
4834
4835# very long TXT record as brought in by axfr-get
4836# note tinydns does not support >512-byte RR data, need axfr-dns (for TCP support) for that
4837# also note, tinydns does not seem to support <512, >256-byte RRdata from axfr-get either. :/
4838#:longtxt.deepnet.cx:16:
4839#\170this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record.
4840#\263 it is really long. long. very long. really very long. this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record.
4841#\351 it is really long. long. very long. really very long.this is a very long txt record. it is really long. long. very long. really very long. this is a very long txt record. it is really long. long. very long. really very long.
4842#:3600
4843
4844 } elsif ($typemap{$type} eq 'CNAME') {
4845
4846 if ($revrec eq 'n') {
4847 print $datafile "C$host:$val:$ttl:$stamp:$loc\n";
4848 } else {
4849 my $val2 = NetAddr::IP->new($val);
4850 print $datafile "C"._ZONE($val2, 'ZONE', 'r', '.').($val2->{isv6} ? '.ip6.arpa' : '.in-addr.arpa').
4851 ":$host:$ttl:$stamp:$loc\n";
4852 }
4853
4854 } elsif ($typemap{$type} eq 'SRV') {
4855
4856 # data is two-byte values for priority, weight, port, in that order,
4857 # followed by length/string data
4858
4859 print $datafile ":$host:33:".octalize($dist,'d').octalize($weight,'d').octalize($port,'d');
4860
4861 $val .= '.' if $val !~ /\.$/;
4862 foreach (split /\./, $val) {
4863 printf $datafile "\\%0.3o%s", length($_), $_;
4864 }
4865 print $datafile "\\000:$ttl:$stamp:$loc\n";
4866
4867 } elsif ($typemap{$type} eq 'RP') {
4868
4869 # RP consists of two mostly free-form strings.
4870 # The first is supposed to be an email address with @ replaced by . (as with the SOA contact)
4871 # The second is the "hostname" of a TXT record with more info.
4872 print $datafile ":$host:17:";
4873 my ($who,$what) = split /\s/, $val;
4874 foreach (split /\./, $who) {
4875 printf $datafile "\\%0.3o%s", length($_), $_;
4876 }
4877 print $datafile '\000';
4878 foreach (split /\./, $what) {
4879 printf $datafile "\\%0.3o%s", length($_), $_;
4880 }
4881 print $datafile "\\000:$ttl:$stamp:$loc\n";
4882
4883 } elsif ($typemap{$type} eq 'PTR') {
4884
4885 $zone = NetAddr::IP->new($zone);
4886 $$recflags{$val}++;
4887 if (!$zone->{isv6} && $zone->masklen > 24) {
4888 ($val) = ($val =~ /\.(\d+)$/);
4889 print $datafile "^$val."._ZONE($zone, 'ZONE', 'r', '.').'.in-addr.arpa'.
4890 ":$host:ttl:$stamp:$loc\n";
4891 } else {
4892 $val = NetAddr::IP->new($val);
4893 print $datafile "^".
4894 _ZONE($val, 'ZONE', 'r', '.').($val->{isv6} ? '.ip6.arpa' : '.in-addr.arpa').
4895 ":$host:$ttl:$stamp:$loc\n";
4896 }
4897
4898 } elsif ($type == 65280) { # A+PTR
4899
4900 $$recflags{$val}++;
4901 print $datafile "=$host:$val:$ttl:$stamp:$loc\n";
4902
4903 } elsif ($type == 65281) { # AAAA+PTR
4904
4905#$$recflags{$val}++;
4906 # treat these as two separate records. since tinydns doesn't have
4907 # a native combined type, we have to create them separately anyway.
4908 if ($revrec eq 'n') {
4909 $type = 28;
4910 } else {
4911 $type = 12;
4912 }
4913 _printrec_tiny($datafile,$revrec,$recflags,$zone,$host,$type,$val,$dist,$weight,$port,$ttl,$loc,$stamp);
4914##fixme: add a config flag to indicate use of the patch from http://www.fefe.de/dns/
4915# type 6 is for AAAA+PTR, type 3 is for AAAA
4916
4917 } elsif ($type == 65282) { # PTR template
4918
4919 # only useful for v4 with standard DNS software, since this expands all
4920 # IPs in $zone (or possibly $val?) with autogenerated records
4921 $val = NetAddr::IP->new($val);
4922 return if $val->{isv6};
4923
4924 if ($val->masklen <= 16) {
4925 foreach my $sub ($val->split(16)) {
4926 __publish_subnet($sub, $recflags, $host, $datafile, $ttl, $stamp, $loc, 1);
4927 }
4928 } else {
4929 __publish_subnet($val, $recflags, $host, $datafile, $ttl, $stamp, $loc, 1);
4930 }
4931
4932 } elsif ($type == 65283) { # A+PTR template
4933
4934 $val = NetAddr::IP->new($val);
4935 # Just In Case. An A+PTR should be impossible to add to a v6 revzone via API.
4936 return if $val->{isv6};
4937
4938 if ($val->masklen <= 16) {
4939 foreach my $sub ($val->split(16)) {
4940 __publish_subnet($sub, $recflags, $host, $datafile, $ttl, $stamp, $loc, 0);
4941 }
4942 } else {
4943 __publish_subnet($val, $recflags, $host, $datafile, $ttl, $stamp, $loc, 0);
4944 }
4945
4946 } elsif ($type == 65284) { # AAAA+PTR template
4947 # Stub for completeness. Could be exported to DNS software that supports
4948 # some degree of internal automagic in generic-record-creation
4949 # (eg http://search.cpan.org/dist/AllKnowingDNS/ )
4950
4951 } elsif ($type == 65285) { # Delegation
4952 # This is intended for reverse zones, but may prove useful in forward zones.
4953
4954 # All delegations need to create one or more NS records. The NS record handler knows what to do.
4955 _printrec_tiny($datafile,$revrec,$recflags,$zone,$host,$reverse_typemap{'NS'},
4956 $val,$dist,$weight,$port,$ttl,$loc,$stamp);
4957 if ($revrec eq 'y') {
4958 # In the case of a sub-/24 v4 reverse delegation, we need to generate CNAMEs
4959 # to redirect all of the individual IP lookups as well.
4960 # Not sure how this would actually resolve if a /24 or larger was delegated
4961 # one way, and a sub-/24 in that >=/24 was delegated elsewhere...
4962 my $dblock = NetAddr::IP->new($val);
4963 if (!$dblock->{isv6} && $dblock->masklen > 24) {
4964 my @subs = $dblock->split;
4965 foreach (@subs) {
4966 next if $$recflags{"$_"};
4967 my ($oct) = ($_->addr =~ /(\d+)$/);
4968 print $datafile "C"._ZONE($_, 'ZONE.in-addr.arpa', 'r', '.').":$oct.".
4969 _ZONE($dblock, 'ZONE.in-addr.arpa', 'r', '.').":$ttl:$stamp:$loc\n";
4970 $$recflags{"$_"}++;
4971 }
4972 }
4973 }
4974
4975##
4976## Uncommon types. These will need better UI support Any Day Sometime Maybe(TM).
4977##
4978
4979 } elsif ($type == 44) { # SSHFP
4980 my ($algo,$fpt,$fp) = split /\s+/, $val;
4981
4982 my $rec = sprintf ":$host:44:\\%0.3o\\%0.3o", $algo, $fpt;
4983 while (my ($byte) = ($fp =~ /^(..)/) ) {
4984 $rec .= sprintf "\\%0.3o", hex($byte);
4985 $fp =~ s/^..//;
4986 }
4987 print $datafile "$rec:$ttl:$stamp:$loc\n";
4988
4989 } else {
4990 # raw record. we don't know what's in here, so we ASS-U-ME the user has
4991 # put it in correctly, since either the user is messing directly with the
4992 # database, or the record was imported via AXFR
4993 # <split by char>
4994 # convert anything not a-zA-Z0-9.- to octal coding
4995
4996##fixme: add flag to export "unknown" record types - note we'll probably end up
4997# mangling them since they were written to the DB from Net::DNS::RR::<type>->rdatastr.
4998 #print $datafile ":$host:$type:$val:$ttl:$stamp:$loc\n";
4999
5000 } # record type if-else
5001
5002} # end _printrec_tiny()
5003
5004
5005## DNSDB::mailNotify()
5006# Sends notification mail to recipients regarding a DNSDB operation
5007sub mailNotify {
5008 my $dbh = shift;
5009 my ($subj,$message) = @_;
5010
5011 return if $config{mailhost} eq 'smtp.example.com'; # do nothing if still using default SMTP host.
5012
5013 my $mailer = Net::SMTP->new($config{mailhost}, Hello => "dnsadmin.$config{domain}");
5014
5015 my $mailsender = ($config{mailsender} ? $config{mailsender} : $config{mailnotify});
5016
5017 $mailer->mail($mailsender);
5018 $mailer->to($config{mailnotify});
5019 $mailer->data("From: \"$config{mailname}\" <$mailsender>\n",
5020 "To: <$config{mailnotify}>\n",
5021 "Date: ".strftime("%a, %d %b %Y %H:%M:%S %z",localtime)."\n",
5022 "Subject: $subj\n",
5023 "X-Mailer: DNSAdmin Notify v".sprintf("%.1d",$DNSDB::VERSION)."\n",
5024 "Organization: $config{orgname}\n",
5025 "\n$message\n");
5026 $mailer->quit;
5027}
5028
5029# shut Perl up
50301;
Note: See TracBrowser for help on using the repository browser.