Index: /trunk/DNSDB.pm
===================================================================
--- /trunk/DNSDB.pm	(revision 217)
+++ /trunk/DNSDB.pm	(revision 218)
@@ -143,4 +143,5 @@
 sub loadConfig {
   my $basename = shift || '';	# this will work OK
+##fixme  $basename isn't doing what I think I thought I was trying to do.
 
   my $deferr = '';	# place to put error from default config file in case we can't find either one
Index: /trunk/INSTALL
===================================================================
--- /trunk/INSTALL	(revision 217)
+++ /trunk/INSTALL	(revision 218)
@@ -1,3 +1,3 @@
-$Id: INSTALL 508 2011-11-16 21:28:37Z kdeugau $
+$Id$
 
 Requirements
@@ -6,9 +6,7 @@
 - Any CGI-capable web server that can execute arbitrary files or
   files with administrator-defineable extensions
-- PostgreSQL >= 7.4.  It should be possible to (fairly) trivially patch
-  the code for any other DBMS that supports:
-  - an IP address/CIDR netblock data type
-  - higher/greater, lower/less than, contains, and is-contained-by
-    operators
+- PostgreSQL >= 7.4.  It should be possible to trivially convert to
+  other DBMSes, however I recommend against any that don't fully
+  support transactions on all changes.
 - Perl >= 5.6
   - Standard modules:
@@ -29,4 +27,5 @@
     - NetAddr::IP >= 4.x.  3.x may work, however 4.x has been out for
       more than 4 years.
+- tinydns - support for other DNS server software is planned
 
 Installing DeepNet DNS Administrator
@@ -35,9 +34,9 @@
 1) Untar in a convenient location.  You should be able to simply use the
 unpacked tarball as-is, or you can run "make install" to install files
-in /usr/local/lib/dnsadmin-#VERSION#, with configuration modules in
-/usr/local/etc/dnsadmin-#VERSION#.
+in /usr/local/share/dnsadmin-#VERSION#, with configuration in
+/usr/local/etc/dnsdb.
 
-The Makefile supports substitution on most standard
-GNU/FHS-ish paths, so you could also run:
+The Makefile supports substitution on most standard GNU/FHS-ish paths,
+so you could also run:
 
   make install prefix=/opt
@@ -51,41 +50,30 @@
 to install for packaging under /tmp/dnsdbpkgroot with the core scripts
 and HTML packaged under /usr/share/dnsdb-#VERSION#, and the configuration
-modules packaged under /etc/dnsdb.
+packaged under /etc/dnsdb.
 
-2) Configuration:  These module files will either be in the cgi-bin/
-directory from the unpacked tarball, or /usr/local/etc/dnsdb
-if installed with 'make install'.
-  a) Edit MyIPDB.pm:  you need to set the database DSN and
-    company info.  You should probably also set the syslog facility and
-    default custid.
-  b) Edit CustIDCK.pm as needed to validate customer IDs.
+2) Configuration:  By default DNS Administrator looks for configuration in
+/etc/dnsdb/dnsdb.conf.  Edit this file with the database name, user, and
+password, and the database host if necessary.
 
-4) As a Postgres superuser, create a database user and the database:
+Setting the options under the "mail" heading is also recommended.
+
+3) As a Postgres superuser, create a database user and the database (replace
+the database name, user and password as appropriate):
 
 shell> psql template1
-pg# create user ipdb with password "ipdbpwd";
-pg# create database ipdb owner ipdb;
+pg# create user dnsdb with password "dnsdbpwd";
+pg# create database dnsdb owner dnsdb;
 
-Add the PL/pgSQL language to the database.  This is not strictly
-necessary but there are triggers on the poolips and allocations table
-to automatically update a last-modified column.
+Create the inital tables using dns.sql:
 
-pg# \c ipdb
-pg# create language plpgsql
+shell> psql -U dnsdb dnsdb <dns.sql
 
-Create the inital tables using cgi-bin/ipdb.psql:
 
-shell> psql -U ipdb ipdb <cgi-bin/ipdb.psql
-
-5) Configure your webserver to call the IPDB scripts at an appropriate
-web path.  A webroot pointing to the HTML files (first level under
-the ipdb-#VERSION#/ tarball directory, or /usr/local/lib/ipdb-#VERSION#)
-should work fine;  a server alias under an existing virtual host should
-work as well.
-
-Set $IPDB::webpath (the web path to your IPDB install) in MyIPDB.pm.
-Straight out of the tarball it should work at the webroot, but if you
-want it in a subdirectory, you'll need to set this variable to get all
-of the internal links to behave properly.
+##work
+4) Configure your webserver to call the DNS Administrator scripts
+at an appropriate web path.  A webroot pointing to the HTML files
+(first level under the dnsadmin-#VERSION#/ tarball directory, or
+/usr/local/lib/dnsadmin-#VERSION#) should work fine;  a server
+alias under an existing virtual host should work as well.
 
 The directory containing the HTML and scripts must have at least the
@@ -94,56 +82,15 @@
   Options ExecCGI IncludesNoEXEC
 
-6) User lists can be maintained two basic ways:
-
-  a) Use the built-in user manager to add and remove users.  This
-    requires mod_auth_pgsql, configured with read/write access to the
-    IPDB users table.  A default user admin, password admin, is created
-    in step 4 above - make sure to create a new user as an admin, and
-    remove the default user (or at least change its password).
-
-  b) Use the built-in user manager as in a) but create a short script to
-    export the user list to a standard .htpasswd file.  This may be
-    useful if mod_auth_pgsql isn't easily available.
-
-  c) Maintain an external .htpasswd file of your own, configured and
-    maintained however you like.  In this case the access-pwd-update.pl
-    script should edited to match the .htpasswd filename/path and should
-    be called from cron to make sure new users get added to the
-    database, and old ones get deleted.  This extra maintenance of user
-    lists is necessary to support the access controls, which are stored
-    in the database.
-
-    You will have to either temporarily create a user "admin", so that user
-    can grant other users priviledges, or run the following on the database:
-
-      UPDATE users SET acl='bacdsA' WHERE username='newadminuser';
-
-    Replace 'newadminuser' as appropriate.
-
-    If you don't do this, nobody will be able to make any changes;
-    access-pwd-update.pl only grants minimal read access to new users.
-
-7) (optional) Pick a log facility by setting $IPDB::syslog_facility in
-MyIPDB.pm, and tweak your syslog configuration to direct IPDB logging
-to a custom log.  Most logging is at the level of "info" or "warn".
-Full changes are not logged.  Logging verbosity isn't very high, so it
-may be acceptable to leave the log stream at the defaults.
+5) A default user "admin", password "admin" is created when you create
+the initial tables in step 3.  You should at least change the password
+on this account, or create another superuser account and remove this
+one.
 
 ---
 
-Basic installation should now be complete!  Log in as an admin user,
-add your ARIN, RIPE, LACNIC, AfriNIC, or APNIC allocations and start
-documenting your netblock usage.
+Basic installation should now be complete!  Log in and start adding
+your domains and domain records.
 
-If you want to export rWHOIS data, see http://www.unixadmin.cc/rwhois/
-for a place to start on setting up an rWHOIS server.  Note that
-db2rwhois.pl creates and maintains the net-<cidr> trees, all you have
-to do is configure the daemon itself.  Schedule runs of
-cgi-bin/extras/db2rwhois.pl followed by rwhois_indexer (every hour
-should be plenty often).  You'll need to fill in correct organization
-contact info in MyIPDB.pm.
-
-If you're just running from the unpacked tarball directory, you may need
-to create symlinks in cgi-bin/extras/ for IPDB.pm and MyIPDB.pm,
-pointing to ../IPDB.pm and ../MyIPDB.pm respectively.  Otherwise
-db2rwhois.pl won't be able to find these modules.
+A minimal export script is included (export.pl).  This should be modified
+to create the tinydns data file where appropriate for your installation,
+and set to be called from cron on a regular basis.
Index: /trunk/export.pl
===================================================================
--- /trunk/export.pl	(revision 218)
+++ /trunk/export.pl	(revision 218)
@@ -0,0 +1,21 @@
+#!/usr/bin/perl
+# $Id$
+# Absolutely minimal DNS record export script
+# (C) 2012 - Kris Deugau <kdeugau@deepnet.cx>
+
+use strict;
+use warnings;
+
+# don't remove!  required for GNU/FHS-ish install from tarball
+use lib '.';	##uselib##
+
+use DNSDB qw(:ALL);
+
+loadConfig();
+
+open TINYDATA, ">tinydata";
+
+my ($dbh,$msg) = connectDB($config{dbname}, $config{dbuser}, $config{dbpass}, $config{dbhost});
+initGlobals($dbh);
+
+export($dbh,'tiny',*TINYDATA);